

Stlinkv2
- Size
- 80 × 45.7 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 91
- Nets
- 85
- Pads
- 342
- Tracks, vias
- 965, 103
- Pours
- 4
- Routed
- Yes
- KiCad
- KiCad 8.0 (file 20240108)
- Created
- 13 Oct 2021
- Updated
- 21 Aug 2025
Overview
Stlinkv2 is an open-source printed circuit board by alekseibutiaev, from the alekseibutiaev/electronics repository on GitHub. It is a 2-layer board of 80 × 45.7 mm with 91 parts on 85 nets, routed with 965 tracks and 103 vias.
It is built around the MEE1S0505SC, ADUM3160BRW and LD3985M33R, with the ST890CDR, USBLC6-2P6 and BAT60JFILM among its other parts. Its parts include 38 resistors, 20 capacitors, 9 connectors, 7 diodes and 6 ICs. It belongs with the STM32 and STM8 boards of this library.
Main components
8MEE1S0505SC
SIP,11.5x6mm-40℃~+85℃ 1 1.5kV 100kHz 10mm 11.5mm 1W 200mA 220uF 4.5V~5.5V 50mVp-p 5V 6mm 80% Short Circuit Protection SIP,11.5x6mm Isolated Power Modules ROHSYLPTECIsolated Power ModulesADUM3160BRW
SOIC16WFull/Low Speed 2.5 kV USB Digital IsolatorAnalog DevicesUncategorisedLD3985M33R
SOT-23-5L-40℃~+125℃@(Tj) 1 150mA 150uA 3.3V 30uVrms 50dB@(10kHz) 60mV@(150mA) 6V Fixed Over Current Protection、Over Temperature Protection、Enable Positive SOT-23-5L Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSSTMicroelectronicsVoltage Regulators - Linear, Low Drop Out (LDO) RegulatorsST890CDR
SOIC-8-40℃~+85℃ 1 1.2A 2.7V~5.5V 90mΩ Active Low High Side Switch Short-Circuit Protection(SCP)、Overcurrent Protection(OCP)、Overtemperature protection (OTP) SOIC-8 Power Distribution Switches ROHSSTMicroelectronicsPower Distribution SwitchesUSBLC6-2P6
SOT-666-6-40℃~+125℃ 150nA 17V 2 3.5pF 5.25V 5A@8/20us 6V ESD IEC 61000-4-2 Unidirectional SOT-666-6 ESD and Surge Protection (TVS/ESD) ROHSSTMicroelectronicsESD And Surge Protection (TVS/ESD)BAT60JFILM
SOD-32310V 3A 580mV@1A 6uA@10V Independent SOD-323 Schottky Diodes ROHSSTMicroelectronicsSchottky DiodesSMF05C
SC-88-40℃~+125℃ 100W@8/20us 12.5V 5 5V 7.2V 70nA 80pF 8A@8/20us IEC 61000-4-2 TVS SC-88 ESD and Surge Protection (TVS/ESD) ROHSonsemiESD And Surge Protection (TVS/ESD)S9013
SOT-23-55℃~+150℃ 1 NPN 100nA 120 150MHz 25V 300mW 500mA 5V 600mV NPN SOT-23 Bipolar (BJT) ROHSTWGMCBipolar (BJT)
Parts
91| Qty | Value | Footprint | References |
|---|---|---|---|
| 14 | 100nF | Capacitor_SMD:C_0805_2012Metric | C1, C2, C3, C4, C5, C8, C10, C11, C12, C14, C17, C18, C19, C20 |
| 11 | 22 | Resistor_SMD:R_0805_2012Metric | R14, R18, R19, R20, R21, R22, R23, R30, R31, R32, R33 |
| 6 | 10k | Resistor_SMD:R_0805_2012Metric | R2, R3, R4, R16, R17, R34 |
| 4 | 100k | Resistor_SMD:R_0805_2012Metric | R6, R10, R11, R36 |
| 4 | 4.7k | Resistor_SMD:R_0805_2012Metric | R7, R8, R9, R12 |
| 4 | MH | MountingHole:MountingHole_2.2mm_M2_ISO14580_Pad | H1, H2, H3, H4 |
| 3 | 1.5k | Resistor_SMD:R_0805_2012Metric | R1, R5, R38 |
| 3 | BAT60JFILM | Diode_SMD:D_SOD-323_HandSoldering | D5, D6, D7 |
| 2 | 100 | Resistor_SMD:R_0805_2012Metric | R13, R29 |
| 2 | 1uF | Capacitor_SMD:C_0805_2012Metric | C13, C16 |
| 2 | 20pF | Capacitor_SMD:C_0805_2012Metric | C6, C7 |
| 2 | 47 | Resistor_SMD:R_0805_2012Metric | R26, R27 |
| 2 | 680 | Resistor_SMD:R_0805_2012Metric | R24, R25 |
| 2 | SMF05C | Package_TO_SOT_SMD:SOT-363_SC-70-6 | D3, D4 |
| 1 | 1 | Resistor_SMD:R_0805_2012Metric | R35 |
| 1 | 10 | Resistor_SMD:R_0805_2012Metric | R15 |
| 1 | 10nF | Capacitor_SMD:C_0805_2012Metric | C15 |
| 1 | 2.7k | Resistor_SMD:R_0805_2012Metric | R28 |
| 1 | 20nF | Capacitor_SMD:C_0805_2012Metric | C9 |
| 1 | 36k | Resistor_SMD:R_0805_2012Metric | R37 |
| 1 | 74LVCC3245 | Package_SO:TSSOP-24_4.4x7.8mm_P0.65mm | U2 |
| 1 | 8MHz | Crystal:Crystal_HC49-4H_Vertical | Y1 |
| 1 | ADUM3160 | Package_SO:SOIC-16W_7.5x10.3mm_P1.27mm | U6 |
| 1 | BOOT0 | Jumper:SolderJumper-2_P1.3mm_Open_TrianglePad1.0x1.5mm | JP1 |
| 1 | BOOT1 | Jumper:SolderJumper-2_P1.3mm_Open_TrianglePad1.0x1.5mm | JP2 |
| 1 | CLONE | Connector_IDC:IDC-Header_2x05_P2.54mm_Vertical | J6 |
| 1 | DBG_UART | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J7 |
| 1 | EXRERNAL POWER | Button_Switch_SMD:SW_SPDT_PCM12 | SW1 |
| 1 | GREEN | Diode_SMD:D_0805_2012Metric | D2 |
| 1 | JTAG | Connector_IDC:IDC-Header_2x10_P2.54mm_Vertical | J2 |
| 1 | LD3985M33R | Package_TO_SOT_SMD:SOT-23-5 | U4 |
| 1 | MEE1S0505SC | Converter_DCDC:Converter_DCDC_Murata_MEE1SxxxxSC_THT | PS1 |
| 1 | POWER | custom:3.5mm power | J3 |
| 1 | POWER | Connector_PinHeader_2.54mm:PinHeader_1x05_P2.54mm_Vertical | J5 |
| 1 | RED | Diode_SMD:D_0805_2012Metric | D1 |
| 1 | S9013 | Package_TO_SOT_SMD:SOT-23_Handsoldering | QC1 |
| 1 | ST890CDR | Package_SO:SO-8_3.9x4.9mm_P1.27mm | U3 |
| 1 | STLSWD | Connector_PinHeader_2.54mm:PinHeader_2x03_P2.54mm_Vertical | J1 |
| 1 | STM32F103CBTx | Package_QFP:LQFP-48_7x7mm_P0.5mm | U1 |
| 1 | STM8 | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J8 |
| 1 | SWD | Connector_PinHeader_2.54mm:PinHeader_1x06_P2.54mm_Vertical | J4 |
| 1 | USB CONTROL | Jumper:SolderJumper-3_P1.3mm_Open_RoundedPad1.0x1.5mm | JP3 |
| 1 | USBLC6-2 | Package_TO_SOT_SMD:SOT-23-6_Handsoldering | U5 |
| 1 | USB_B_Mini | Connector_USB:USB_Mini-B_Wuerth_65100516121_Horizontal | J9 |
More from alekseibutiaev/electronics
12- 2 layers213.1 × 129 mm

- 2 layers283.2 × 111.1 mm

- 2 layers101.6 × 50.8 mm

- 2 layers

- 2 layers213.1 × 129 mm

- 2 layers70 × 57.5 mm

- 2 layers

- 2 layers57.1 × 17.8 mm

- 2 layers31.8 × 16.5 mm

- 2 layers35 × 23 mm

- 2 layers81.3 × 35.6 mm

- 2 layers47.5 × 47.7 mm

Similar boards
- 2 layers62.2 × 95.6 mm

DiyBMS CurrentVoltage ADS1115
ff0000wire/diyBMS_CurrentVoltage_ADS1115
Isolated current and voltage sensor for up to 850V based on ADS1115 and attiny1614
51 parts3 - 4 layers100 × 100 mm

DMX servo controller hardware
flavioamieiro/dmx_servo_controller
This source describes Open Hardware and is licensed under the CERN-OHL-S v2. You may redistribute and modify this source and make products using it under the terms of the CERN-OHL-S v2.
63 parts1 - 2 layers91.5 × 91.5 mm

Trigger led box
nippoo/lawrence-button-two
This repository contains the STL files, KiCad design and Gerber files, and Arduino code used in building the Lawrence Button Two.
28 parts1 - 4 layers136 × 65 mm

Audio development board simple
am-a3/audio_development_board
Audio development board with breadboard
92 parts - 2 layers180 × 180 mm

Av3
enzomedeiros0109/Mega2560-PLC
Este projeto consiste no design de uma Placa de Circuito Impresso (PCB) voltada para aplicações de controle, automação e desenvolvimento.
120 parts - 2 layers115.3 × 137.1 mm

Fraiseiver2panel
MetaluNet/Fraise-cad
Fraise-cad is the repo for Fraise boards design files
186 partsGPL-3.0 - 4 layers40 × 45 mm

- 4 layers20.3 × 99.1 mm

Proton
ewyrick-mark-1/Chromatone
Chromatone is an embedded audio visualizer running on the Raspberry Pi RP2350. It samples audio through the ADC, performs a real-time FFT, detects musical notes, and drives an RGB LED output based on the results.
119 parts1
Questions
How big is the Stlinkv2 PCB?
It measures 80 × 45.7 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Stlinkv2 use?
91 parts, built around the MEE1S0505SC, ADUM3160BRW, LD3985M33R and ST890CDR. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Stlinkv2 KiCad files?
From the alekseibutiaev/electronics repository on GitHub, at the commit this page was made from: the board is stlinkv2/stlinkv2.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Stlinkv2 design in my own project?
Its repository states no licence, so its author keeps all rights: ask alekseibutiaev before reusing the design.