
PWM breakout board
flavioamieiro/dmx_servo_controller
This source describes Open Hardware and is licensed under the CERN-OHL-S v2. You may redistribute and modify this source and make products using it under the terms of the CERN-OHL-S v2.

This source describes Open Hardware and is licensed under the CERN-OHL-S v2. You may redistribute and modify this source and make products using it under the terms of the CERN-OHL-S v2.
DMX servo controller hardware is an open-source printed circuit board by flavioamieiro, from the flavioamieiro/dmx_servo_controller repository on GitHub. It is a 4-layer board of 100 × 100 mm with 63 parts on 81 nets, routed with 272 tracks and 187 vias.
It is built around the SN65HVD11HD, MEE1S0505SC and PCA9685PW, with the BSS138 among its other parts. Its parts include 27 resistors, 11 capacitors, 9 connectors, 4 ICs and 2 diodes. It belongs with the robots and motor control boards and the RP2040 boards of this library.
DMX servo controller
This source describes Open Hardware and is licensed under the CERN-OHL-S v2. You may redistribute and modify this source and make products using it under the terms of the CERN-OHL-S v2.
Source location: https://github.com/flavioamieiro/Neopixel-Pico-Arcade
As per CERN-OHL-S v2 section 4, should You produce hardware based on this source, You must where practicable maintain the Source Location visible on the external case of the Gizmo or other products you make using this source.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 16 | 220Ω | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R10, R11, R12, R13, R14, R15, R16, R17, R18, R19, R20, R21, R22, R23, R24, R25 |
| 6 | 100nF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C1, C4, C6, C8, C9, C11 |
| 5 | 10kΩ | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R1, R2, R3, R5, R28 |
| 4 | 1μF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C2, C5, C7, C10 |
| 4 | MountingHole | MountingHole:MountingHole_4.3mm_M4_ISO7380 | H1, H2, H3, H4 |
| 2 | 0Ω | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R6, R7 |
| 2 | 680Ω | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R8, R9 |
| 2 | BSS138 | Package_TO_SOT_SMD:SOT-23 | Q1, Q2 |
| 2 | To_XLR3 | Connector_JST:JST_XH_B3B-XH-AM_1x03_P2.50mm_Vertical | J1, J2 |
| 1 | 1000μF | Capacitor_THT:CP_Radial_D10.0mm_P5.00mm | C3 |
| 1 | 330Ω | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R27 |
| 1 | 470Ω | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R26 |
| 1 | 6N137 | DMX_servo_controller_hardware:6N137-X007T | U3 |
| 1 | C211752 M7 | Diode_SMD:D_SMA | D2 |
| 1 | Display | Connector_JST:JST_XH_B4B-XH-AM_1x04_P2.50mm_Vertical | J4 |
| 1 | LOGO | MatheusLibs:mnds_logo_normal | G*** |
| 1 | MEE1S0505SC | Converter_DCDC:Converter_DCDC_Murata_MEE1SxxxxSC_THT | PS1 |
| 1 | Output block 1 | Connector_JST:JST_XH_B5B-XH-AM_1x05_P2.50mm_Vertical | J6 |
| 1 | Output block 2 | Connector_JST:JST_XH_B5B-XH-AM_1x05_P2.50mm_Vertical | J7 |
| 1 | Output block 3 | Connector_JST:JST_XH_B5B-XH-AM_1x05_P2.50mm_Vertical | J8 |
| 1 | Output block 4 | Connector_JST:JST_XH_B5B-XH-AM_1x05_P2.50mm_Vertical | J9 |
| 1 | PCA9685PW | Package_SO:TSSOP-28_4.4x9.7mm_P0.65mm | U1 |
| 1 | Pico | RPi_Pico:RPi_Pico_SMD_TH | U4 |
| 1 | Power connector | TerminalBlock:TerminalBlock_bornier-2_P5.08mm | J3 |
| 1 | Reset | Button_Switch_SMD:SW_SPST_TL3342 | SW1 |
| 1 | Rotary encoder | Connector_JST:JST_XH_B5B-XH-AM_1x05_P2.50mm_Vertical | J5 |
| 1 | SM712_SOT23 | Package_TO_SOT_SMD:SOT-23 | D1 |
| 1 | SN65HVD11HD | Package_DIP:DIP-8_W7.62mm | U2 |
| 1 | Val** | AmieiroFootprints:ipe_logo_FSilk_10x10 | Ref** |

flavioamieiro/dmx_servo_controller
This source describes Open Hardware and is licensed under the CERN-OHL-S v2. You may redistribute and modify this source and make products using it under the terms of the CERN-OHL-S v2.


L0czek/rakieta
The starter board provides the ignition impulse to fire the engine. It includes an I2C IO expander and an 8-channel digital comparator to require a correct safety byte/address to be present before firing.

ff0000wire/diyBMS_CurrentVoltage_ADS1115
Isolated current and voltage sensor for up to 850V based on ADS1115 and attiny1614

nippoo/lawrence-button-two
This repository contains the STL files, KiCad design and Gerber files, and Arduino code used in building the Lawrence Button Two.

am-a3/audio_development_board
Audio development board with breadboard

enzomedeiros0109/Mega2560-PLC
Este projeto consiste no design de uma Placa de Circuito Impresso (PCB) voltada para aplicações de controle, automação e desenvolvimento.

MetaluNet/Fraise-cad
Fraise-cad is the repo for Fraise boards design files

It measures 100 × 100 mm and has 4 copper layers, 1.6 mm thick.
63 parts, built around the SN65HVD11HD, MEE1S0505SC, PCA9685PW and BSS138. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the flavioamieiro/dmx_servo_controller repository on GitHub, at the commit this page was made from: the board is DMX_servo_controller_hardware/DMX_servo_controller_hardware.kicad_pcb and its schematic DMX_servo_controller_hardware/DMX_servo_controller_hardware.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask flavioamieiro before reusing the design.