2 layers112.8 × 100.8 mm
Clamp1 panel
MetaluNet/Fraise-cad
Fraise-cad is the repo for Fraise boards design files
186 partsGPL-3.0
2 layers115.3 × 137.1 mm
Fraiseiver2panel
MetaluNet/Fraise-cadFraise-cad is the repo for Fraise boards design files
- Size
- 115.3 × 137.1 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 186
- Nets
- 22
- Pads
- 582
- Tracks, vias
- 1,434, 54
- Pours
- 12
- Routed
- Yes
- KiCad
- KiCad 7 (file 20221018)
- Created
- 1 Oct 2024
- Updated
- 26 Nov 2024
Overview
Fraiseiver2panel is an open-source printed circuit board by MetaluNet, from the MetaluNet/Fraise-cad repository on GitHub, published under the GPL-3.0 licence. It is a 2-layer board of 115.3 × 137.1 mm with 186 parts on 22 nets, routed with 1,434 tracks and 54 vias.
It is built around the SN75176AD, MEE1S0505SC and TLP2767(E. Its parts include 36 resistors, 30 connectors, 24 capacitors, 24 ICs and 6 diodes.
Main components
3
SN75176AD
SOIC-80℃~+70℃ 1 1 4.75V~5.25V 5Mbps Transceiver SOIC-8 RS-485 / RS-422 ICs ROHSTexas InstrumentsRS-485/RS-422 ICs
MEE1S0505SC
SIP,11.5x6mm-40℃~+85℃ 1 1.5kV 100kHz 10mm 11.5mm 1W 200mA 220uF 4.5V~5.5V 50mVp-p 5V 6mm 80% Short Circuit Protection SIP,11.5x6mm Isolated Power Modules ROHSYLPTECIsolated Power Modules
TLP2767(E
SOIC-6-300mil-40℃~+125℃ 1 10mA 10mA 2.1V 2.7V~5.5V 20mW 20ns 20ns 25kV/us 4mA 50Mbps 5V 5kV 6V DC SOIC-6-300mil Logic Output Optoisolators ROHSToshibaLogic Output Optoisolators
README
README.mdFraise-cad
Fraise-cad is the repo for Fraise boards design files
Parts
186| Qty | Value | Footprint | References |
|---|---|---|---|
| 18 | 10k | Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P5.08mm_Horizontal | R4, R10, R11, R12, R16, R17, R18, R22, R23, R24, R28, R29, R30, R34, R35, R36 +2 |
| 18 | 330 | Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P5.08mm_Horizontal | R1, R2, R3, R7, R13, R14, R15, R19, R20, R21, R25, R26, R27, R31, R32, R33 +2 |
| 18 | TLP2767 | Package_SO:SO-6L_10x3.84mm_P1.27mm | U2, U3, U4, U6, U10, U11, U12, U14, U15, U16, U18, U19, U20, U22, U23, U24 +2 |
| 12 | 100n | Capacitor_THT:C_Rect_L4.6mm_W2.0mm_P2.50mm_MKS02_FKP02 | C1, C2, C5, C6, C9, C10, C13, C14, C17, C18, C21, C22 |
| 12 | 10u | Capacitor_THT:CP_Radial_D5.0mm_P2.50mm | C3, C4, C7, C8, C11, C12, C15, C16, C19, C20, C23, C24 |
| 12 | MountingHole | MountingHole:MountingHole_3.2mm_M3_Pad_TopOnly | H1, H2, H3, H4, H5, H6, H7, H8, H9, H10, H11, H12 |
| 12 | RJ14 | Fraiseiver2:RJ11 | J1, J4, J6, J9, J11, J14, J16, J19, J21, J24, J26, J29 |
| 12 | SolderJumper_2_Open | Jumper:SolderJumper-2_P1.3mm_Open_RoundedPad1.0x1.5mm | JP2, JP4, JP7, JP9, JP12, JP14, JP17, JP19, JP22, JP24, JP27, JP29 |
| 6 | 2N7002 | Package_TO_SOT_SMD:SOT-23 | Q1, Q2, Q3, Q4, Q5, Q6 |
| 6 | Bornier2 | TerminalBlock_Phoenix:TerminalBlock_Phoenix_MKDS-3-2-5.08_1x02_P5.08mm_Horizontal | J2, J7, J12, J17, J22, J27 |
| 6 | Conn_01x04_Socket | TerminalBlock:TerminalBlock_bornier-4_P5.08mm | J5, J10, J15, J20, J25, J30 |
| 6 | D_Schottky | Diode_SMD:D_SMA | D1, D2, D3, D4, D5, D6 |
| 6 | Fraise_5x2 | Connector_IDC:IDC-Header_2x05_P2.54mm_Vertical | J3, J8, J13, J18, J23, J28 |
| 6 | LOGO | Fraiseiver2:metalunet-mini | G***, G***1, G***3, G***5, G***7, G***9 |
| 6 | LOGO | Fraiseiver2:FraiseLogo | G***, G***2, G***4, G***6, G***8, G***10 |
| 6 | MEE1S0505SC | Converter_DCDC:Converter_DCDC_Murata_MEE1SxxxxSC_THT | PS1, PS2, PS3, PS4, PS5, PS6 |
| 6 | SN75176AD | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U1, U5, U9, U13, U17, U21 |
| 6 | bypassDiode | Jumper:SolderJumper-2_P1.3mm_Open_RoundedPad1.0x1.5mm | JP5, JP10, JP15, JP20, JP25, JP30 |
| 6 | link12V | TestPoint:TestPoint_2Pads_Pitch2.54mm_Drill0.8mm | JP1, JP6, JP11, JP16, JP21, JP26 |
| 6 | linkGnd | TestPoint:TestPoint_2Pads_Pitch2.54mm_Drill0.8mm | JP3, JP8, JP13, JP18, JP23, JP28 |
More from MetaluNet/Fraise-cad
12- 2 layers114.8 × 117.6 mm
Fraiseiver3-panel
MetaluNet/Fraise-cad
Fraise-cad is the repo for Fraise boards design files
144 partsGPL-3.0 - 2 layers115.3 × 137.1 mm
Fraiseiver2panel
MetaluNet/Fraise-cad
Fraise-cad is the repo for Fraise boards design files
132 partsGPL-3.0 - 2 layers99.9 × 117.3 mm
PicoMot panel
MetaluNet/Fraise-cad
Fraise-cad is the repo for Fraise boards design files
132 partsGPL-3.0 - 2 layers110 × 110 mm
PicoFraiseX4
MetaluNet/Fraise-cad
Fraise-cad is the repo for Fraise boards design files
84 partsGPL-3.0 - 2 layers112.8 × 110 mm
PicoFraiseX4
MetaluNet/Fraise-cad
Fraise-cad is the repo for Fraise boards design files
76 partsGPL-3.0 - 2 layers49.8 × 91.6 mm
- 2 layers49.8 × 49.9 mm
- 2 layers32.9 × 49.9 mm
- 2 layers33 × 45.2 mm
- 2 layers32.9 × 49.9 mm
- 2 layers
Similar boards
- 2 layers160 × 99.1 mm
Carrier board editing
JQIamo/Eurocard_DDS
DDS Controller designed for the DDS board with ad9910 at JQI
68 parts3 - 2 layers150 × 100 mm
- 2 layers17.8 × 28.8 mm
AOD protector fault handler
JQIamo/AOD_protector
The protection circuit for the acousto-optic deflectors used for tweezers
14 partsMIT - 2 layers62.2 × 95.6 mm
DiyBMS CurrentVoltage ADS1115
ff0000wire/diyBMS_CurrentVoltage_ADS1115
Isolated current and voltage sensor for up to 850V based on ADS1115 and attiny1614
51 parts3 - 4 layers100 × 100 mm
DMX servo controller hardware
flavioamieiro/dmx_servo_controller
This source describes Open Hardware and is licensed under the CERN-OHL-S v2. You may redistribute and modify this source and make products using it under the terms of the CERN-OHL-S v2.
63 parts1 - 2 layers91.5 × 91.5 mm
Trigger led box
nippoo/lawrence-button-two
This repository contains the STL files, KiCad design and Gerber files, and Arduino code used in building the Lawrence Button Two.
28 parts1 - 4 layers136 × 65 mm
Audio development board simple
am-a3/audio_development_board
Audio development board with breadboard
92 parts - 2 layers180 × 180 mm
Av3
enzomedeiros0109/Mega2560-PLC
Este projeto consiste no design de uma Placa de Circuito Impresso (PCB) voltada para aplicações de controle, automação e desenvolvimento.
120 parts
Questions
How big is the Fraiseiver2panel PCB?
It measures 115.3 × 137.1 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Fraiseiver2panel use?
186 parts, built around the SN75176AD, MEE1S0505SC and TLP2767(E. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Fraiseiver2panel KiCad files?
From the MetaluNet/Fraise-cad repository on GitHub, at the commit this page was made from: the board is Fraiseiver2/Fraiseiver2/Fraiseiver2panel.kicad_pcb and its schematic Fraiseiver2/Fraiseiver2/Fraiseiver2.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Fraiseiver2panel design in my own project?
Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).