Skip to the content
1234

MEE1S0505SC

YLPTECExtended

-40℃~+85℃ 1 1.5kV 100kHz 10mm 11.5mm 1W 200mA 220uF 4.5V~5.5V 50mVp-p 5V 6mm 80% Short Circuit Protection SIP,11.5x6mm Isolated Power Modules ROHS

Part id
ylptec/MEE1S0505SC
Category
Isolated Power Modules
Package
SIP,11.5x6mm
Pins
4
In stock
90 at JLCPCB (C5382249)
Used on
11 open-source boards

Overview

The MEE1S0505SC is an isolated Power Module made by YLPTEC in a SIP,11.5x6mm package with 4 pins. -40℃~+85℃ 1 1.5kV 100kHz 10mm 11.5mm 1W 200mA 220uF 4.5V~5.5V 50mVp-p 5V 6mm 80% Short Circuit Protection SIP,11.5x6mm Isolated Power Modules ROHS.

PCBKit's library has its KiCad symbol (Converter_DCDC_Isolated:MEE1S0505SC, from KiCad's library) and its footprint (Converter_DCDC:Converter_DCDC_Murata_MEE1SxxxxSC_THT, from KiCad's library), ready for a KiCad board. 90 are in stock at JLCPCB (part C5382249). 11 open-source boards in 8 repositories on GitHub use it.

Symbol

1-Vin2+Vin3-Vout4+Vout
Converter_DCDC_Isolated:MEE1S0505SCFrom KiCad's library

Footprint

1234
Converter_DCDC:Converter_DCDC_Murata_MEE1SxxxxSC_THTFrom KiCad's library

Pinout

4
The pins of the MEE1S0505SC
PinNameType
1-VinPower in
2+VinPower in
3-VoutPower out
4+VoutPower out

Open-source boards using it

11See all 11
  • 2 layers62.2 × 95.6 mmDiyBMS CurrentVoltage ADS1115, the printed circuit board in 3D

    DiyBMS CurrentVoltage ADS1115

    ff0000wire/diyBMS_CurrentVoltage_ADS1115

    Isolated current and voltage sensor for up to 850V based on ADS1115 and attiny1614

    51 parts3
  • 4 layers100 × 100 mmDMX servo controller hardware, the printed circuit board in 3D

    DMX servo controller hardware

    flavioamieiro/dmx_servo_controller

    This source describes Open Hardware and is licensed under the CERN-OHL-S v2. You may redistribute and modify this source and make products using it under the terms of the CERN-OHL-S v2.

    63 parts1
  • 2 layers91.5 × 91.5 mmTrigger led box, the printed circuit board in 3D

    Trigger led box

    nippoo/lawrence-button-two

    This repository contains the STL files, KiCad design and Gerber files, and Arduino code used in building the Lawrence Button Two.

    28 parts1
  • 2 layers180 × 180 mmAv3, the printed circuit board in 3D

    Av3

    enzomedeiros0109/Mega2560-PLC

    Este projeto consiste no design de uma Placa de Circuito Impresso (PCB) voltada para aplicações de controle, automação e desenvolvimento.

    120 parts
  • 2 layers115.3 × 137.1 mmFraiseiver2panel, the printed circuit board in 3D

    Fraiseiver2panel

    MetaluNet/Fraise-cad

    Fraise-cad is the repo for Fraise boards design files

    186 partsGPL-3.0
  • 2 layers80 × 45.7 mmStlinkv2, the printed circuit board in 3D

    Stlinkv2

    alekseibutiaev/electronics

    91 parts
  • 2 layers32.9 × 49.9 mmFraiseiver2, the printed circuit board in 3D

    Fraiseiver2

    MetaluNet/Fraise-cad

    Fraise-cad is the repo for Fraise boards design files

    31 partsGPL-3.0

Parts like it

8

Questions

Is there a KiCad symbol and footprint for the MEE1S0505SC?

Yes. The symbol is Converter_DCDC_Isolated:MEE1S0505SC and the footprint Converter_DCDC:Converter_DCDC_Murata_MEE1SxxxxSC_THT, both drawn on this page. PCBKit places them on a board for you when you design with it.

What package is the MEE1S0505SC?

SIP,11.5x6mm, with 4 pins. Its footprint is drawn on this page.

Where is the MEE1S0505SC datasheet?

YLPTEC publishes it: the Datasheet link on this page opens it.

Where can I order the MEE1S0505SC?

JLCPCB lists it as part C5382249, with 90 in stock; the sellers' links on this page open their listings.

What can replace the MEE1S0505SC?

Parts like it in the library: the B0505S-1WR3 by HI-LINK, the F0505S-1WR3 by YLPTEC, the B0505S-1W by YLPTEC and the B0505S-2WR3 by YLPTEC. Check their datasheets: a part that fits the footprint may still differ in its ratings.

Which open-source boards use the MEE1S0505SC?

11 boards in 8 repositories on GitHub; the most starred are listed on this page, with their KiCad files.