2 layers40 × 24 mm
SN75176AD
Texas InstrumentsExtended
0℃~+70℃ 1 1 4.75V~5.25V 5Mbps Transceiver SOIC-8 RS-485 / RS-422 ICs ROHS
- Part id
- ti/SN75176AD
- Category
- RS 485, RS 422 ICs
- Package
- SOIC-8
- Pins
- 8
- In stock
- 4,533 at JLCPCB (C468242)
- Used on
- 20 open-source boards
Overview
The SN75176AD is a RS 485, RS 422 IC made by Texas Instruments in a SOIC-8 package with 8 pins. 0℃~+70℃ 1 1 4.75V~5.25V 5Mbps Transceiver SOIC-8 RS-485 / RS-422 ICs ROHS.
PCBKit's library has its KiCad symbol (Interface_UART:SN75176AD, from KiCad's library) and its footprint (Package_SO:SOIC-8_3.9x4.9mm_P1.27mm, from KiCad's library), ready for a KiCad board. 4,533 are in stock at JLCPCB (part C468242). 20 open-source boards in 15 repositories on GitHub use it.
Symbol
Footprint
From the datasheet
13- Supply, least
- 4.75 V · VCC, recommended operating, min · p. 4
- Supply, most
- 5.25 V · VCC, recommended operating, max · p. 4
- Supply, absolute maximum
- 7 V · VCC, absolute maximum · p. 4
- Works from
- 0 °C · operating free-air temperature, min · p. 4
- Works up to
- 70 °C · operating free-air temperature, max · p. 4
- Takes working
- 35 mA · VCC, total package, outputs enabled, no load, typical · p. 5
- Takes at most
- 50 mA · VCC, total package, outputs enabled, no load, max · p. 5
- A pin gives at most
- 60 mA · driver output source or sink current, max · p. 1
- Data rate, most
- 5 Mbit/s · RS485 communication, max · p. 1
- Edge
- 65 ns · driver differential-output transition, RL = 60 Ω, VCC = 5 V, 25°C, typical · p. 6
- Junction to air (D)
- 116.7 K/W · junction-to-ambient thermal resistance · p. 4
- Junction to board (D)
- 63.4 K/W · junction-to-board thermal resistance · p. 4
- Junction to case (D)
- 56.3 K/W · junction-to-case top thermal resistance · p. 4
- 4 layers100 × 100 mm
MWGEN G1
MR-DOS/MWGEN-G1
12.5 MHz - 6400 MHz (LMX2572) or even up to 20 GHz (LMX2595) generator board with int./ext. reference.
373 parts18GPL-3.0 - 4 layers65.5 × 74.8 mm
- 4 layers78 × 70 mm
Radome dish controller
ay2718/RadomeMotorController
The Radome CAN protocol is very simple. Send azimuth commands to address 0x1 and elevation commands to address 0x2. Azimuth and elevation reply back from addresses 0x101 and 0x102 respectively.
89 parts1 - 2 layers40 × 51 mm
- 4 layers80 × 50 mm
MianCtrl H7
Aiyin4Da-2/Main_Ctrl_H7
STM32H723VGT6 MainCtrlBoard Author: Aiyin4DaGLD · Hardware: v1.2 · Updated: 2026-08-21
153 partsMIT - 4 layers50 × 50 mm
- 2 layers
Parts like it
8
SN65HVD3082ED
SOIC-8-40℃~+85℃ 1 1 200Kbps 256 300uA 4.5V~5.5V Half-Duplex Transceiver ±15kV SOIC-8 RS-485 / RS-422 ICs ROHSTexas InstrumentsRS-485/RS-422 ICsISL83483IBZ-T
SOIC-8-40℃~+85℃ 1 1 250Kbps 32 3V~3.6V 650uA Half-Duplex Transceiver SOIC-8 RS-485 / RS-422 ICs ROHSRenesas ElectronicsRS-485/RS-422 ICsMAX13085EESA+
SOIC-8-40℃~+85℃ 1 1 1.8mA 256 4.5V~5.5V 500Kbps Half-Duplex Transceiver ±15kV SOIC-8 RS-485 / RS-422 ICs ROHSMaxim Integrated (Analog Devices)RS-485/RS-422 ICsISL83088EIBZ
SOIC-8-40℃~+85℃ 1 1 10Mbps 4.5V~5.5V Transceiver SOIC-8 RS-485 / RS-422 ICs ROHSRenesas ElectronicsRS-485/RS-422 ICsMAX3467ESA+
SO-8-40℃~+85℃ 1 1 128 2.5mA 4.75V~5.25V 40Mbps Full-Duplex Transceiver ±6kV SO-8 RS-485 / RS-422 ICs ROHSMaxim Integrated (Analog Devices)RS-485/RS-422 ICsISL83488IBZ-T
SOIC-8-40℃~+85℃ 1 1 250Kbps 3V~3.6V Transceiver SOIC-8 RS-485 / RS-422 ICs ROHSRenesas ElectronicsRS-485/RS-422 ICsADM3490ARZ
SOIC-8-40℃~+85℃ 1 1 10Mbps 3V~3.6V Transceiver SOIC-8 RS-485 / RS-422 ICs ROHSAnalog DevicesRS-485/RS-422 ICsADM1485JRZ
SOIC-80℃~+70℃ 1 1 30Mbps 4.75V~5.25V Transceiver SOIC-8 RS-485 / RS-422 ICs ROHSAnalog DevicesRS-485/RS-422 ICs
Questions
Is there a KiCad symbol and footprint for the SN75176AD?
Yes. The symbol is Interface_UART:SN75176AD and the footprint Package_SO:SOIC-8_3.9x4.9mm_P1.27mm, both drawn on this page. PCBKit places them on a board for you when you design with it.
What package is the SN75176AD?
SOIC-8, with 8 pins. Its footprint is drawn on this page.
Where is the SN75176AD datasheet?
Texas Instruments publishes it: the Datasheet link on this page opens it.
Where can I order the SN75176AD?
JLCPCB lists it as part C468242, with 4,533 in stock; the sellers' links on this page open their listings.
What can replace the SN75176AD?
Parts like it in the library: the SN65HVD3082ED by Texas Instruments, the ISL83483IBZ-T by Renesas Electronics, the MAX13085EESA+ by Maxim Integrated (Analog Devices) and the ISL83088EIBZ by Renesas Electronics. Check their datasheets: a part that fits the footprint may still differ in its ratings.
Which open-source boards use the SN75176AD?
20 boards in 15 repositories on GitHub; the most starred are listed on this page, with their KiCad files.