
2057-ICE40HX4K TQ144-breakout
johnwinans/2057-ICE40HX4K-TQ144-breakout
Minimal Raspberry PI breakout board for ICE40HX4K FPGA

Paliz pcb v2 is an open-source printed circuit board by ImanHz, from the ImanHz/paliz_pcb_v2 repository on GitHub. It is a 2-layer board with 169 parts on 205 nets, routed with 785 tracks and 26 vias.
It is built around the ESP32-S3-WROOM-1-N8, SN75176AD and CH340C, with the HLK-5M05, LM321 and AT45DB161D-SU among its other parts. Its parts include 29 resistors, 20 capacitors, 5 ICs, 3 switches and 2 transistors. It belongs with the ESP32 and STM32 boards of this library.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 18 | 100nF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | c3, c4, c5, c6, c7, cb1, cch1, cch2, ce1, cf1, cm1, cm2, cm3, cm4, cm5, cm6 +2 |
| 12 | 100K | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | ebj1, ebp1, ebp2, ebp3, i2c1, i2c2, r21, r22, rboot1, rf1, rf2, rres1 |
| 10 | 1N4148W | Diode_SMD:D_SOD-123 | di2, di3, di4, di5, di6, di8, dr1, dr2, dr3, dr4 |
| 10 | PC817 | Package_DIP:DIP-4_W7.62mm_SMDSocket_SmallPads | aco1, aco2, in3, in4, in6, in8, out1, out2, out3, out4 |
| 9 | 0 | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | jadc1, jadc2, rms1, rms2, rms3, rms4, rsj0, rsj1, rsjg1 |
| 6 | 1K | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | r17, r18, rlb1, rlb2, rlb3, rlb4 |
| 6 | 680 | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | r1, r5, r7, r8, r14, r16 |
| 5 | 10K | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | er1, r23, r24, r26, r27 |
| 5 | PMBT2222A | Package_TO_SOT_SMD:SOT-23 | qm1, qr1, qr2, qr3, qr4 |
| 4 | 2.7K | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | r28, r29, r32, r33 |
| 4 | 20pF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | chse1, chse2, clse1, clse2 |
| 4 | 3.3K | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | r30, r31, r34, r35 |
| 4 | SANYOU_SRD_Form_C | Relay_THT:Relay_SPDT_SANYOU_SRD_Series_Form_C | relay1, relay2, relay3, relay4 |
| 3 | 7.5K | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | r3, r4, r12 |
| 3 | Conn_01x04_Pin | Connector_Molex:Molex_KK-254_AE-6410-04A_1x04_P2.54mm_Vertical | iso5, OLED1, Sensor1 |
| 3 | SW_Push | Button_Switch_SMD:SW_Push_1P1T_NO_6x6mm_H9.5mm | SW1, SWB1, SWE1 |
| 2 | 100K | Resistor_THT:R_Axial_DIN0414_L11.9mm_D4.5mm_P20.32mm_Horizontal | rb1, rb2 |
| 2 | 1uF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | cr1, crp1 |
| 2 | 22 | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | ru1, ru2 |
| 2 | 33K | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | ra3, ra4 |
| 2 | 560 | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | r19, r20 |
| 2 | 68 | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | ra5, ra6 |
| 2 | 68K | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | ra1, ra2 |
| 2 | 6N137 | Package_DIP:DIP-8_W7.62mm | HS1, HS2 |
| 2 | C_Polarized | Capacitor_THT:CP_Radial_D4.0mm_P1.50mm | C1, C2 |
| 2 | C_Polarized | Capacitor_THT:CP_Radial_D22.0mm_P10.00mm_SnapIn | cr2, cr3 |
| 2 | Conn_01x02_Pin | Connector_Molex:Molex_KK-254_AE-6410-02A_1x02_P2.54mm_Vertical | pwr1, usb1 |
| 2 | Conn_01x05_Pin | Connector_Molex:Molex_KK-254_AE-6410-05A_1x05_P2.54mm_Vertical | eprg1, prg1 |
| 2 | D_Zener | Diode_SMD:D_MiniMELF_Handsoldering | dz1, dz2 |
| 2 | LM321 | Package_TO_SOT_SMD:SOT-23-5 | U4, U5 |
| 2 | MB1S | Diode_SMD:Diode_Bridge_OnSemi_SDIP-4L | bridge1, bridge2 |
| 2 | Screw_Terminal_01x03 | TerminalBlock:TerminalBlock_Altech_AK300-3_P5.00mm | 220in1, MODBUS1 |
| 2 | T2N7002AK | Package_TO_SOT_SMD:SOT-23 | Q1, Q2 |
| 2 | TBD | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | cu1, cu2 |
| 1 | 120 | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | r6 |
| 1 | 2.2K | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | r2 |
| 1 | 2.8K | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | r10 |
| 1 | 22uF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | ce2 |
| 1 | 4.7uF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | cen1 |
| 1 | 560 | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | r9 |
| 1 | 8Mhz | Crystal:Crystal_SMD_HC49-SD | hse1 |
| 1 | ADuM1201BR | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | iso1 |
| 1 | AT45DB161D-SU | Package_SO:SOIC-8_5.275x5.275mm_P1.27mm | flash1 |
| 1 | CH340C | Package_SO:SOIC-16_3.9x9.9mm_P1.27mm | CH340 |
| 1 | CR1220 | CR1220:CR1220-SMD | BAT1 |
| 1 | Conn_01x03_Pin | Connector_Molex:Molex_KK-254_AE-6410-03A_1x03_P2.54mm_Vertical | AIN1 |
| 1 | Conn_01x07_Pin | Connector_Molex:Molex_KK-254_AE-6410-07A_1x07_P2.54mm_Vertical | din1 |
| 1 | Conn_01x08_Socket | Connector_Molex:Molex_KK-254_AE-6410-08A_1x08_P2.54mm_Vertical | DDO1 |
| 1 | Conn_01x09_Pin | Connector_Molex:Molex_KK-254_AE-6410-09A_1x09_P2.54mm_Vertical | relayout1 |
| 1 | Conn_02x11_Odd_Even | Connector_PinHeader_2.00mm:PinHeader_2x11_P2.00mm_Vertical | espio1 |
| 1 | Crystal | Crystal:Crystal_AT310_D3.0mm_L10.0mm_Horizontal | lse1 |
| 1 | ESP32-S3-WROOM-1 | RF_Module:ESP32-S3-WROOM-1 | U1 |
| 1 | HLK-5M05 | Converter_ACDC:Converter_ACDC_Hi-Link_HLK-5Mxx | PS1 |
| 1 | Jumper_2_Open | TestPoint:TestPoint_2Pads_Pitch2.54mm_Drill0.8mm | ebt1 |
| 1 | LD1117S33TR_SOT223 | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | U2 |
| 1 | L_Ferrite | Inductor_SMD:L_0805_2012Metric_Pad1.05x1.20mm_HandSolder | L1 |
| 1 | SN75176AD | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U3 |
| 1 | STM32F051C8Tx | Package_QFP:LQFP-48_7x7mm_P0.5mm | mcu1 |
| 1 | SW_SPDT | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | pwrs1 |
| 1 | Screw_Terminal_01x02 | TerminalBlock_MetzConnect:TerminalBlock_MetzConnect_Type011_RT05502HBWC_1x02_P5.00mm_Horizontal | acin1 |
| 1 | USB_B_Micro | Connector_USB:USB_Mini-B_Lumberg_2486_01_Horizontal | chusb1 |

johnwinans/2057-ICE40HX4K-TQ144-breakout
Minimal Raspberry PI breakout board for ICE40HX4K FPGA

vd-rd/sbc_at91sam9g10
Open hardware SBC module based on AT91SAM9G10 @266MHz with max 128MB RAM



petrinm/ESP32Dali
Interface with DALI compatible lighting devices using ESPHome project

nebularnoise/quadrants
Skiff-friendly SMD version of the Prok Eurorack Drum Modules.


Tobias0110/EVN_Kaifa_ESP_MQTT
Allows you to read the MBus data of a Kaifa smartmeter used by the EVN in Austria, decrypt the packages and send the values over MQTT.
169 parts, built around the ESP32-S3-WROOM-1-N8, SN75176AD, CH340C and HLK-5M05. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the ImanHz/paliz_pcb_v2 repository on GitHub, at the commit this page was made from: the board is test.kicad_pcb and its schematic test.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask ImanHz before reusing the design.