
Sbc
vd-rd/sbc_at91sam9g20
Open hardware SBC module based on AT91SAM9G20 @400MHz with 128MB RAM

Open hardware SBC module based on AT91SAM9G10 @266MHz with max 128MB RAM
Sbc is an open-source printed circuit board by vd-rd, from the vd-rd/sbc_at91sam9g10 repository on GitHub. It is a 4-layer board of 66 × 42 mm with 118 parts on 221 nets, routed with 2,452 tracks and 399 vias.
It is built around the AT91SAM9G10-CU, TPS62A01APDDC and AT45DB161D-SU, with the MT48LC16M16A2P-6A:G and RTL8188CUS-GR among its other parts. Its parts include 59 capacitors, 30 resistors, 7 ICs, 4 connectors and 2 switches. It belongs with the computers and single-board computers boards of this library.
An open hardware and software Single Board Computer based on the Microchip AT91SAM9G10, designed for IoT and embedded applications with full SPI/UART/I2C expansion capabilities. This is a learning project exploring Linux board design with mainline kernel support.

| Characteristic | Description |
|---|---|
| Dimensions | 66mm x 42mm |
| Processor | AT91SAM9G10 - ARM926EJ @ 266MHz |
| Oscillators | 18.432MHz main clock, 32.768kHz RTC |
| RAM | SDRAM 1Gb max (2x 512Mbit modules) |
| Storage | microSD |
| USB | 1 microUSB Host/Client, 2 USB host |
| Ethernet | N/A |
| WiFi/BT | WiFi module onboard |
| Supply | USB, 5V max |
| Interfaces | SPI, UART, I2C, GPIO exposed on headers |
| OS Support | Linux (mainline kernel with custom device tree) |
Common interfaces such as I2C, SPI, UART and GPIO are exposed on the header.
Unlike other Glasnost boards, this SBC does not include NOR Flash for a recovery environment. The AT91SAM9G10's limited peripheral availability means the board relies entirely on microSD card boot. Linux must be booted from the microSD card—there is no fallback recovery distro on internal flash.
This project is created using KiCad 9
Complete documentation including schematics, PCB design, and build instructions is available in the docs directory and published at the project website.
For pre-built artifacts:
| Qty | Value | Footprint | References |
|---|---|---|---|
| 32 | 100nF | Capacitor_SMD:C_0402_1005Metric | C10, C11, C12, C13, C14, C16, C17, C18, C19, C20, C21, C22, C24, C25, C26, C27 +16 |
| 7 | 100k | Resistor_SMD:R_0402_1005Metric | R2, R3, R10, R28, R29, R30, R31 |
| 6 | 39 | Resistor_SMD:R_0402_1005Metric | R11, R12, R13, R14, R15, R16 |
| 5 | 15k | Resistor_SMD:R_0402_1005Metric | R17, R18, R19, R20, R21 |
| 4 | 22uF | Capacitor_SMD:C_0805_2012Metric | C23, C40, C58, C59 |
| 4 | 47pF | Capacitor_SMD:C_0402_1005Metric | C49, C51, C53, C54 |
| 4 | MountingHole | MountingHole:MountingHole_2.7mm_M2.5_DIN965 | H1, H2, H3, H4 |
| 3 | 180 | Resistor_SMD:R_0402_1005Metric | R4, R6, R7 |
| 3 | 1uF | Capacitor_SMD:C_0402_1005Metric | C15, C37, C56 |
| 3 | Fiducial | Fiducial:Fiducial_0.75mm_Mask1.5mm | FID1, FID2, FID3 |
| 2 | 10k | Resistor_SMD:R_0402_1005Metric | R8, R9 |
| 2 | 10pF | Capacitor_SMD:C_0402_1005Metric | C1, C3 |
| 2 | 10uF | Capacitor_SMD:C_0603_1608Metric | C912, C913 |
| 2 | 120pF | Capacitor_SMD:C_0402_1005Metric | C32, C34 |
| 2 | 15pF | Capacitor_SMD:C_0402_1005Metric | C50, C52 |
| 2 | 1uH | Inductor_SMD:L_Wuerth_MAPI-2512 | L2, L3 |
| 2 | 2.2uF | Capacitor_SMD:C_0603_1608Metric | C31, C41 |
| 2 | 22pF | Capacitor_SMD:C_0402_1005Metric | C2, C4 |
| 2 | 5.1K | Resistor_SMD:R_0402_1005Metric | R24, R26 |
| 2 | MT48LC16M16A2P | Package_SO:TSOP-II-54_22.2x10.16mm_P0.8mm | U2, U3 |
| 2 | SW_Push | Button_Switch_SMD:SW_SPST_EVQP7C | SW1, SW2 |
| 2 | TPS62A01APDDC | Package_TO_SOT_SMD:SOT-23-6 | U7, U8 |
| 1 | 1.5k | Resistor_SMD:R_0402_1005Metric | R5 |
| 1 | 1.5nF | Capacitor_SMD:C_0402_1005Metric | C28 |
| 1 | 15nF | Capacitor_SMD:C_0402_1005Metric | C5 |
| 1 | 18.432MHz | Crystal:Crystal_SMD_3225-4Pin_3.2x2.5mm | Y1 |
| 1 | 2.2K | Resistor_SMD:R_0402_1005Metric | R25 |
| 1 | 2.2nF | Capacitor_SMD:C_0402_1005Metric | C30 |
| 1 | 22k | Resistor_SMD:R_0402_1005Metric | R22 |
| 1 | 22nF | Capacitor_SMD:C_0402_1005Metric | C29 |
| 1 | 2k | Resistor_SMD:R_0402_1005Metric | R1 |
| 1 | 32.768kHz | Crystal:Crystal_SMD_3215-2Pin_3.2x1.5mm | Y2 |
| 1 | 453k | Resistor_SMD:R_0402_1005Metric | R27 |
| 1 | AT45DB161D-SU | Package_SO:SOIC-8_5.275x5.275mm_P1.27mm | U5 |
| 1 | AT91SAM9G10 | microchip:AT91SAM9G10 | U1 |
| 1 | Antenna_Shield | Connector_Coaxial:U.FL_Hirose_U.FL-R-SMT-1_Vertical | AE1 |
| 1 | Conn_01x08 | Connector_PinHeader_1.27mm:PinHeader_2x04_P1.27mm_Vertical | J3 |
| 1 | Conn_02x18_Odd_Even | Connector_PinHeader_2.54mm:PinHeader_2x18_P2.54mm_Vertical | J4 |
| 1 | LED_BAGR | led:LED_RGB_Optosupply_OSTB0805C1E-A-0.8T | D3 |
| 1 | Micro_SD_Card_Det | gct:MEM20610118800A | J1 |
| 1 | RTL8188CUS | wifi:RTL8188CUS | U6 |
| 1 | USB_C_Receptacle_USB2.0_16P | Connector_USB:USB_C_Receptacle_GCT_USB4105-xx-A_16P_TopMnt_Horizontal | J5 |
| 1 | Vbus | TestPoint:TestPoint_Pad_D1.0mm | TP4 |
| 1 | Vcore | TestPoint:TestPoint_Pad_D1.0mm | TP5 |
| 1 | Vio | TestPoint:TestPoint_Pad_D1.0mm | TP6 |

vd-rd/sbc_at91sam9g20
Open hardware SBC module based on AT91SAM9G20 @400MHz with 128MB RAM


johnwinans/2057-ICE40HX4K-TQ144-breakout
Minimal Raspberry PI breakout board for ICE40HX4K FPGA


vd-rd/sbc_allwinner_a13
Open hardware compute module with Allwinner A13 (ARM-A8 @1GHz), DDR3 (max 512MB) and expansions (USB, GPIO, WiFi, LCD, Audio)

damjanovgit/Linux-capable-PCB
Dizajn štampane pločice i board bring-up za Linux operativni sistem.

o7-machinehum/wifiwart
Linux SBC featuring two wifi radios, masquerading as a USB charger.

regymm/muzy
2-layer and 4-layer FPGA development board with ZYNQ 7010/7020 400-pin BGA.
It measures 66 × 42 mm and has 4 copper layers, 1.18 mm thick.
118 parts, built around the AT91SAM9G10-CU, TPS62A01APDDC, AT45DB161D-SU and MT48LC16M16A2P-6A:G. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the vd-rd/sbc_at91sam9g10 repository on GitHub, at the commit this page was made from: the board is hardware/sbc.kicad_pcb and its schematic hardware/cpu.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask vd-rd before reusing the design.