
Sbc
Gidronaft/tst
Common interfaces such as I2C, SPI, UART and GPIO are exposed on the header.

Open hardware SBC module based on AT91SAM9G20 @400MHz with 128MB RAM
Sbc is an open-source printed circuit board by vd-rd, from the vd-rd/sbc_at91sam9g20 repository on GitHub. It is a 4-layer board of 66 × 42 mm with 116 parts on 226 nets, routed with 3,180 tracks and 444 vias.
It is built around the 74AUP1G17GW, MT48LC16M16A2P-6A:G and AT91SAM9G20-CU, with the RTL8188CUS-GR, USBLC6-2P6 and BSS84 among its other parts. Its parts include 59 capacitors, 27 resistors, 8 ICs, 6 connectors and 3 inductors. It belongs with the computers and single-board computers and home automation and IoT boards of this library.
View this project on CADLAB.io.

The follow-up to my previous SBC based on AT91SAM9260, enhancing the board specs in computing power and flexibility. The board is smaller 60x40mm now (SAM9260 was 80x40mm) while keeping the same amount of supported RAM and interfaces. AT91SAM9G20 boosts core speed to 400MHz and bus speed to 133MHz.
Board overview (draft): [TBD]
| Characteristic | Description |
|---|---|
| Dimensions | 60mm x 40mm |
| Processor | AT91SAM9G20 - ARM926EJ @ 400MHz |
| Oscillators | 18.432MHz main clock, 32.768kHz RTC |
| RAM | SDRAM 128MB max (2x512Mbit modules) |
| Storage | microSD |
| USB | 1 microUSB client, 2 USB Host |
| Ethernet | RMII header |
| WiFi/BT | N/A |
| Supply | USB 5V, ACIN 5V |
Common interfaces such as I2C, SPI, UART and GPIO are exposed on the header.
Build U-Boot and Linux kernel + rootFS - TBD
Flash to SDCard - TBD
You can find all necesary information to build or evaluate the module here:
| Qty | Value | Footprint | References |
|---|---|---|---|
| 35 | 100nF | Capacitor_SMD:C_0402_1005Metric | C10, C11, C12, C13, C14, C16, C17, C18, C19, C20, C21, C22, C23, C24, C25, C26 +19 |
| 7 | 10uF | Capacitor_SMD:C_0603_1608Metric | C53, C54, C55, C56, C57, C58, C912 |
| 6 | 39 | Resistor_SMD:R_0402_1005Metric | R1, R2, R3, R5, R8, R10 |
| 5 | 15k | Resistor_SMD:R_0402_1005Metric | R11, R12, R13, R14, R15 |
| 4 | 4.7uF | Capacitor_SMD:C_0603_1608Metric | C60, C61, C62, C63 |
| 4 | 47pF | Capacitor_SMD:C_0402_1005Metric | C5, C28, C29, C30 |
| 4 | MountingHole | MountingHole:MountingHole_2.7mm_M2.5_DIN965 | H1, H2, H3, H4 |
| 3 | 100k | Resistor_SMD:R_0402_1005Metric | R20, R23, R24 |
| 3 | 180 | Resistor_SMD:R_0402_1005Metric | R4, R6, R7 |
| 3 | 2.2uH | Inductor_SMD:L_Wuerth_MAPI-2512 | L1, L2, L3 |
| 3 | Conn_01x08 | Connector_PinHeader_1.27mm:PinHeader_2x04_P1.27mm_Vertical | J3, J5, J6 |
| 2 | 10pF | Capacitor_SMD:C_0402_1005Metric | C1, C3 |
| 2 | 15pF | Capacitor_SMD:C_0402_1005Metric | C34, C35 |
| 2 | 2.2uF | Capacitor_SMD:C_0402_1005Metric | C41, C59 |
| 2 | 22pF | Capacitor_SMD:C_0402_1005Metric | C2, C4 |
| 2 | 47k | Resistor_SMD:R_0402_1005Metric | R17, R18 |
| 2 | 5.1K | Resistor_SMD:R_0402_1005Metric | R21, R28 |
| 2 | MT48LC16M16A2P | jedec:TSOP-II-54_22.2x10.16mm_P0.8mm | U200, U300 |
| 2 | SW_Push | Button_Switch_SMD:SW_SPST_EVQP7C | SW1, SW2 |
| 1 | 11.1k | Resistor_SMD:R_0402_1005Metric | R19 |
| 1 | 18.432MHz | Crystal:Crystal_SMD_3225-4Pin_3.2x2.5mm | Y1 |
| 1 | 1M | Resistor_SMD:R_0402_1005Metric | R25 |
| 1 | 1k | Resistor_SMD:R_0402_1005Metric | R9 |
| 1 | 1uF | Capacitor_SMD:C_0402_1005Metric | C37 |
| 1 | 2.2K | Resistor_SMD:R_0402_1005Metric | R27 |
| 1 | 22k | Resistor_SMD:R_0402_1005Metric | R16 |
| 1 | 32.768kHz | Crystal:Crystal_SMD_3215-2Pin_3.2x1.5mm | Y2 |
| 1 | 68k | Resistor_SMD:R_0402_1005Metric | R29 |
| 1 | 74AUP1G17 | Package_TO_SOT_SMD:Texas_R-PDSO-N5_DRL-5 | U401 |
| 1 | AT25xxx | Package_SO:SOIC-8_5.23x5.23mm_P1.27mm | U110 |
| 1 | AT91SAM9G20 | microchip:AT91SAM9G10 | U100 |
| 1 | Antenna_Shield | Connector_Coaxial:U.FL_Hirose_U.FL-R-SMT-1_Vertical | AE1 |
| 1 | BSS84 | Package_TO_SOT_SMD:SOT-323_SC-70 | Q1 |
| 1 | Conn_02x18_Odd_Even | Connector_PinHeader_2.54mm:PinHeader_2x18_P2.54mm_Vertical | J4 |
| 1 | D_Schottky | Diode_SMD:D_SOD-323 | D2 |
| 1 | LED_BAGR | led:LED_RGB_Optosupply_OSTB0805C1E-A-0.8T | D3 |
| 1 | MCP16501A | Package_DFN_QFN:QFN-24-1EP_4x4mm_P0.5mm_EP2.7x2.7mm_ThermalVias | U400 |
| 1 | Micro_SD_Card_Det | gct:MEM20610118800A | J1 |
| 1 | RTL8188CUS | wifi:RTL8188CUS | U500 |
| 1 | TestPoint | TestPoint:TestPoint_Pad_D1.0mm | TP3 |
| 1 | USBLC6-2P6 | Package_TO_SOT_SMD:SOT-23-6 | U101 |
| 1 | USB_C_Receptacle_USB2.0_16P | Connector_USB:USB_C_Receptacle_GCT_USB4105-xx-A_16P_TopMnt_Horizontal | J2 |

Gidronaft/tst
Common interfaces such as I2C, SPI, UART and GPIO are exposed on the header.


vd-rd/sbc_at91sam9g10
Open hardware SBC module based on AT91SAM9G10 @266MHz with max 128MB RAM

vd-rd/sbc_allwinner_a13
Open hardware compute module with Allwinner A13 (ARM-A8 @1GHz), DDR3 (max 512MB) and expansions (USB, GPIO, WiFi, LCD, Audio)



damjanovgit/Linux-capable-PCB
Dizajn štampane pločice i board bring-up za Linux operativni sistem.

o7-machinehum/wifiwart
Linux SBC featuring two wifi radios, masquerading as a USB charger.
It measures 66 × 42 mm and has 4 copper layers, 1.18 mm thick.
116 parts, built around the 74AUP1G17GW, MT48LC16M16A2P-6A:G, AT91SAM9G20-CU and RTL8188CUS-GR. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the vd-rd/sbc_at91sam9g20 repository on GitHub, at the commit this page was made from: the board is hardware/sbc.kicad_pcb and its schematic hardware/cpu.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask vd-rd before reusing the design.