
PLC Hardware
akbar-q/Circuits-PCB-HardwareDesign
The High Voltage Arc Detector is a non-contact RF-based sensing system that detects high-voltage electrical arcs.

The High Voltage Arc Detector is a non-contact RF-based sensing system that detects high-voltage electrical arcs.
MPPT Controller is an open-source printed circuit board by akbar-q, from the akbar-q/Circuits-PCB-HardwareDesign repository on GitHub. It is a 4-layer board of 99 × 99 mm with 101 parts on 91 nets, routed with 426 tracks and 142 vias.
It is built around the CH340C, ESP32-WROOM-32D and ADS1115IDGS, with the LM2596S-ADJ, TC4422ESM and LM1117DT-3.3 among its other parts. Its parts include 33 resistors, 17 capacitors, 11 connectors, 10 diodes and 7 ICs. It belongs with the ESP32 boards of this library.
Client Project - Fiverr Delivery
Version: 1.0
Date: April 2025
Designer: Akbar Q Hardware Design
The High Voltage Arc Detector is a non-contact RF-based sensing system that detects high-voltage electrical arcs. Using a differential antenna and fast amplification, the system captures high-frequency electromagnetic noise from arcing events and outputs a user-friendly signal. This signal can drive a buzzer and LED for alerts or be interfaced with other control systems via a latched output.
| File | Description |
|---|---|
\Renders\NonContactHVDetector.png | [Top-side PCB render] |
\Renders\PCB Sheet.pdf | [Full schematic PDF] |
\Renders\Schematic Sheet.pdf | [PCB layout drawing PDF] |
CompareSig goes high.LongPulse to trigger downstream systems (e.g., microcontrollers, relays).| Item | Value |
|---|---|
| PCB Size | ~75mm x 45mm |
| Stackup | JLC04161H-7628 |
| Fabrication | JLCPCB |
| Schematic Tool | KiCad 9.0 |
This hardware design was custom-made for a Fiverr client, it has been made public only with authorization of the Client. Commercial reuse or redistribution outside the original Fiverr transaction is prohibited unless licensed.
For revisions, follow-up customizations, or future electronics designs:
Contact: contact@akbarq.com
Portfolio: akbarq.com
| Qty | Value | Footprint | References |
|---|---|---|---|
| 10 | 0.1u | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C1, C2, C3, C4, C5, C6, C9, C10, C11, C12 |
| 8 | 50R | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R2, R3, R4, R5, R7, R8, R32, R33 |
| 6 | Conn_01x02_Pin | TerminalBlock:TerminalBlock_Altech_AK300-2_P5.00mm | J1, J2, J3, J4, J6, J10 |
| 5 | 220R | LED_SMD:LED_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R16, R17, R18, R19, R20 |
| 5 | LED | LED_SMD:LED_1206_3216Metric_Pad1.42x1.75mm_HandSolder | D1, D2, D3, D4, D5 |
| 4 | 0.1R | Resistor_SMD:R_4020_10251Metric | LR1, LR2, LR3, LR4 |
| 4 | 10k | LED_SMD:LED_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R26, R27, R28, R29 |
| 4 | LOGO | LOGO | G***, G***, G***, G*** |
| 3 | Conn_01x02_Pin | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J7, J8, J9 |
| 2 | 1k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R13, R15 |
| 2 | 1k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R11, R12 |
| 2 | 200k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R6, R14 |
| 2 | 4.7k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R30, R31 |
| 2 | 470u | Capacitor_THT:C_Radial_D16.0mm_H25.0mm_P7.50mm | C16, C17 |
| 2 | ADS1115IDGS | Package_SO:TSSOP-10_3x3mm_P0.5mm | U1, U7 |
| 2 | C | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C7, C8 |
| 2 | Fuse | Fuse:Fuseholder_Clip-5x20mm_Bel_FC-203-22_Lateral_P17.80x5.00mm_D1.17mm_Horizontal | F1, F2 |
| 2 | NTC | Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P1.90mm_Vertical | TH1, TH2 |
| 2 | R | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | R9, R10 |
| 2 | SS34 | Diode_SMD:D_SMA | D8, D9 |
| 2 | SW_Push | Button_Switch_SMD:SW_Push_1P1T_XKB_TS-1187A | BOOT1, RESET1 |
| 1 | |||
| 1 | 100uH | Inductor_THT:L_Toroid_Vertical_L25.4mm_W14.7mm_P12.20mm_Vishay_TJ5_BigPads | L2 |
| 1 | 10R | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R23 |
| 1 | 10R | Resistor_THT:R_Axial_Power_L25.0mm_W6.4mm_P27.94mm | R25 |
| 1 | 10kR | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R24 |
| 1 | 10n | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C13 |
| 1 | 1N4007 | Diode_THT:D_DO-41_SOD81_P10.16mm_Horizontal | D6 |
| 1 | 1k | LED_SMD:LED_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R1 |
| 1 | 1u | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C14 |
| 1 | 220u | Inductor_SMD:L_10.4x10.4_H4.8 | L1 |
| 1 | 3.3k | LED_SMD:LED_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R21 |
| 1 | 330u | Capacitor_SMD:CP_Elec_10x10.5 | C15 |
| 1 | CH340C | Package_SO:SOIC-16_3.9x9.9mm_P1.27mm | U3 |
| 1 | Conn_01x02_Pin | Connector_PinSocket_2.54mm:PinSocket_2x01_P2.54mm_Vertical | J11 |
| 1 | Conn_01x06_Pin | Connector_PinHeader_2.54mm:PinHeader_2x03_P2.54mm_Vertical | FLASH1 |
| 1 | Diode | Diode_SMD:D_MELF | D7 |
| 1 | ESP32-WROOM-32D | RF_Module:ESP32-WROOM-32D | U2 |
| 1 | Fan_4pin | Connector:FanPinHeader_1x04_P2.54mm_Vertical | M1 |
| 1 | Heatsink_Pad_2Pin | Heatsink:Heatsink_Stonecold_HS-132_32x14mm_2xFixation1.5mm | HS2 |
| 1 | IRL540N | Package_TO_SOT_THT:TO-220-3_Vertical | Q1 |
| 1 | Jumper_2_Bridged | TestPoint:TestPoint_2Pads_Pitch2.54mm_Drill0.8mm | JP1 |
| 1 | LM1117DT-3.3 | Package_TO_SOT_SMD:TO-252-3_TabPin2 | U4 |
| 1 | LM2596S-ADJ | Package_TO_SOT_SMD:TO-263-5_TabPin3 | U5 |
| 1 | R | LED_SMD:LED_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R22 |
| 1 | SK1010 | Diode_SMD:D_SMC | D10 |
| 1 | SW_SPDT | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | SW1 |
| 1 | TC4422 | Package_DIP:DIP-8_W7.62mm | U6 |
| 1 | USB_C_Receptacle_USB2.0_16P | Connector_USB:USB_C_Receptacle_GCT_USB4085 | J5 |

akbar-q/Circuits-PCB-HardwareDesign
The High Voltage Arc Detector is a non-contact RF-based sensing system that detects high-voltage electrical arcs.

akbar-q/Circuits-PCB-HardwareDesign
The High Voltage Arc Detector is a non-contact RF-based sensing system that detects high-voltage electrical arcs.

akbar-q/Circuits-PCB-HardwareDesign
The High Voltage Arc Detector is a non-contact RF-based sensing system that detects high-voltage electrical arcs.

akbar-q/Circuits-PCB-HardwareDesign
The High Voltage Arc Detector is a non-contact RF-based sensing system that detects high-voltage electrical arcs.

akbar-q/Circuits-PCB-HardwareDesign
The High Voltage Arc Detector is a non-contact RF-based sensing system that detects high-voltage electrical arcs.

akbar-q/Circuits-PCB-HardwareDesign
The High Voltage Arc Detector is a non-contact RF-based sensing system that detects high-voltage electrical arcs.

akbar-q/Circuits-PCB-HardwareDesign
The High Voltage Arc Detector is a non-contact RF-based sensing system that detects high-voltage electrical arcs.

akbar-q/Circuits-PCB-HardwareDesign
The High Voltage Arc Detector is a non-contact RF-based sensing system that detects high-voltage electrical arcs.



Joe-Purvis/UFE
This repository consolidates multiple projects into a single monorepo for the Ultrasound Smart Switch system.

iowlabs/FluOpti
Los LEDs que se deben controlar realizan 3 tareas distintas: 1. Excitar la muestra para poder adquirir imágenes de fluorescencia: LEDs azules. 2.

ilomon10/embedded-totalizer-hour-meter
ESP32 engine hour meter & totalizer: firmware, SensorFrame protocol, Node host tools, KiCad PCB and a Deno device simulator

potpurri/A1-External-ESP8266-Cooling-Fan-Module
ESP8266-board driving an external fan for improved cooling of nozzle and prints


It measures 99 × 99 mm and has 4 copper layers, 1.6 mm thick.
101 parts, built around the CH340C, ESP32-WROOM-32D, ADS1115IDGS and LM2596S-ADJ. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the akbar-q/Circuits-PCB-HardwareDesign repository on GitHub, at the commit this page was made from: the board is MPPT Controller/MPPT-Controller.kicad_pcb and its schematic Battery Management Client Collab/bms.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask akbar-q before reusing the design.