
PowerRF AMP
akbar-q/Circuits-PCB-HardwareDesign
The High Voltage Arc Detector is a non-contact RF-based sensing system that detects high-voltage electrical arcs.

The High Voltage Arc Detector is a non-contact RF-based sensing system that detects high-voltage electrical arcs.
PLC Hardware is an open-source printed circuit board by akbar-q, from the akbar-q/Circuits-PCB-HardwareDesign repository on GitHub. It is a 2-layer board of 68.7 × 164.8 mm with 160 parts on 105 nets, routed with 387 tracks and 100 vias.
It is built around the ULN2803A. Its parts include 64 resistors, 28 ICs, 24 diodes, 23 capacitors and 6 connectors.
Client Project - Fiverr Delivery
Version: 1.0
Date: April 2025
Designer: Akbar Q Hardware Design
The High Voltage Arc Detector is a non-contact RF-based sensing system that detects high-voltage electrical arcs. Using a differential antenna and fast amplification, the system captures high-frequency electromagnetic noise from arcing events and outputs a user-friendly signal. This signal can drive a buzzer and LED for alerts or be interfaced with other control systems via a latched output.
| File | Description |
|---|---|
\Renders\NonContactHVDetector.png | [Top-side PCB render] |
\Renders\PCB Sheet.pdf | [Full schematic PDF] |
\Renders\Schematic Sheet.pdf | [PCB layout drawing PDF] |
CompareSig goes high.LongPulse to trigger downstream systems (e.g., microcontrollers, relays).| Item | Value |
|---|---|
| PCB Size | ~75mm x 45mm |
| Stackup | JLC04161H-7628 |
| Fabrication | JLCPCB |
| Schematic Tool | KiCad 9.0 |
This hardware design was custom-made for a Fiverr client, it has been made public only with authorization of the Client. Commercial reuse or redistribution outside the original Fiverr transaction is prohibited unless licensed.
For revisions, follow-up customizations, or future electronics designs:
Contact: contact@akbarq.com
Portfolio: akbarq.com
| Qty | Value | Footprint | References |
|---|---|---|---|
| 37 | 1k | Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P1.90mm_Vertical | R10, R15, R16, R17, R18, R22, R23, R24, R28, R29, R30, R30, R31, R32, R33, R34 +21 |
| 25 | PC817 | Package_DIP:DIP-4_W7.62mm | U2, U10, U11, U12, U13, U14, U15, U16, U19, U20, U21, U22, U23, U24, U25, U26 +9 |
| 23 | C_Small | Capacitor_THT:C_Disc_D3.8mm_W2.6mm_P2.50mm | C1, C2, C10, C11, C12, C13, C14, C15, C16, C16, C17, C17, C18, C18, C19, C20 +7 |
| 15 | 1.2k | Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P2.54mm_Vertical | R1, R2, R3, R4, R11, R12, R13, R14, R19, R20, R21, R25, R26, R27, R31 |
| 14 | D_Zener | Diode_THT:D_5W_P5.08mm_Vertical_AnodeUp | D1, D2, D3, D4, D5, D6, D7, D8, D9, D10, D11, D12, D13, D14 |
| 10 | 1N4007 | Diode_THT:D_DO-41_SOD81_P10.16mm_Horizontal | D15, D16, D17, D18, D19, D20, D21, D22, D23, D24 |
| 10 | 220 | Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P1.90mm_Vertical | R32, R33, R34, R35, R40, R41, R42, R43, R48, R49 |
| 8 | LOGO | LOGO | G***, G***, G***, G***, G***, G***, G***, G*** |
| 4 | Conn_01x04_Pin | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J3, J4, J5, J6 |
| 2 | Conn_01x12_Pin | Connector_PinHeader_2.54mm:PinHeader_1x12_P2.54mm_Vertical | CON-9B1, CON-9B2 |
| 2 | ULN2803A | Package_DIP:DIP-18_W7.62mm | U17, U18 |
| 1 | |||
| 1 | 1.2k | Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P1.90mm_Vertical | R5 |
| 1 | 330 | Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P1.90mm_Vertical | R6 |
| 1 | Buzzer | Buzzer_Beeper:MagneticBuzzer_Kobitone_254-EMB73-RO | BZ1 |
| 1 | Conn_01x07_Male | Connector_PinHeader_2.54mm:PinHeader_1x07_P2.54mm_Vertical | J2 |
| 1 | Conn_01x09_Male | Connector_PinHeader_2.54mm:PinHeader_1x09_P2.54mm_Vertical | J1 |
| 1 | LM317_TO-220 | Package_TO_SOT_THT:TO-220-3_Horizontal_TabDown | U1 |
The 157 most common of 160 parts.

akbar-q/Circuits-PCB-HardwareDesign
The High Voltage Arc Detector is a non-contact RF-based sensing system that detects high-voltage electrical arcs.

akbar-q/Circuits-PCB-HardwareDesign
The High Voltage Arc Detector is a non-contact RF-based sensing system that detects high-voltage electrical arcs.

akbar-q/Circuits-PCB-HardwareDesign
The High Voltage Arc Detector is a non-contact RF-based sensing system that detects high-voltage electrical arcs.

akbar-q/Circuits-PCB-HardwareDesign
The High Voltage Arc Detector is a non-contact RF-based sensing system that detects high-voltage electrical arcs.

akbar-q/Circuits-PCB-HardwareDesign
The High Voltage Arc Detector is a non-contact RF-based sensing system that detects high-voltage electrical arcs.

akbar-q/Circuits-PCB-HardwareDesign
The High Voltage Arc Detector is a non-contact RF-based sensing system that detects high-voltage electrical arcs.

akbar-q/Circuits-PCB-HardwareDesign
The High Voltage Arc Detector is a non-contact RF-based sensing system that detects high-voltage electrical arcs.

akbar-q/Circuits-PCB-HardwareDesign
The High Voltage Arc Detector is a non-contact RF-based sensing system that detects high-voltage electrical arcs.

leomil72/LM80C
A Z80-based homebrew computer withTMS9918, AY-3-8910, Z80 CTC, Z80 PIO, and Z80 SIO

OverInvented/Flippy
The code needed to build a mechanical 7-segment display that uses electromagnets to display characters


crgarcia12/electronics-homeassistant-lightscontroll
A smart lighting controller PCB that integrates seamlessly with ESPHome and Home Assistant while maintaining full compatibility with traditional mechanical switches.




It measures 68.7 × 164.8 mm and has 2 copper layers, 1.6 mm thick.
160 parts, built around the ULN2803A. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the akbar-q/Circuits-PCB-HardwareDesign repository on GitHub, at the commit this page was made from: the board is PLC-Hardware/PLC-Hardware.kicad_pcb and its schematic Battery Management Client Collab/bms.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask akbar-q before reusing the design.