
GR ISO Board
GadgetReboot/GR_ISO_Board
Isolation breakout board with a 5V isolated DC-DC converter, optocouplers, Relay, and more.

A companion display & controls for the FT-817
FT817 buddy v4 is an open-source printed circuit board by g7uhn, from the g7uhn/ft817_buddy repository on GitHub, published under the CC-BY-SA-4.0 licence. It is a 2-layer board of 73 × 113 mm with 76 parts on 83 nets, routed with 480 tracks and 31 vias.
It is built around the B0505S-1W, ADUM1201AR and AMS1117-5.0, with the ULN2803A among its other parts. Its parts include 22 resistors, 11 switches, 10 capacitors, 9 connectors and 5 ICs. It belongs with the radio and wireless boards and the AVR (ATmega, ATtiny) boards of this library.
A companion display & controls for the FT-817.

This is a work in progess, more information at my page.
A little story about the build is over at SWLing Post.
Rev4 hardware files now released :-)
Enjoy!

This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 9 | SW_Push | Button_Switch_THT:SW_PUSH_6mm | SW1, SW2, SW3, SW4, SW5, SW6, SW7, SW8, SW9 |
| 6 | 100nF | Capacitor_SMD:C_0805_2012Metric_Pad1.15x1.40mm_HandSolder | C1, C3, C4, C5, C6, C10 |
| 5 | Silkscreen:diode_small | , , , , | |
| 5 | 2.2K | Resistor_SMD:R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R1, R12, R13, R14, R15 |
| 5 | LED | LED_SMD:LED_0805_2012Metric_Pad1.15x1.40mm_HandSolder | D1, D2, D3, D4, D5 |
| 4 | 10K | Resistor_SMD:R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R8, R10, R11, R16 |
| 4 | 1K | Resistor_SMD:R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R9, R18, R20, R22 |
| 2 | Connector_PinHeader_2.54mm:PinHeader_1x05_P2.54mm_Vertical | J7, J8 | |
| 2 | 10k | Resistor_SMD:R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R3, R4 |
| 2 | 1nF | Capacitor_SMD:C_0805_2012Metric_Pad1.15x1.40mm_HandSolder | C8, C9 |
| 2 | 47k | Resistor_SMD:R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R2, R6 |
| 1 | 100k | Resistor_SMD:R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R7 |
| 1 | 10nF | Capacitor_SMD:C_0805_2012Metric_Pad1.15x1.40mm_HandSolder | C7 |
| 1 | 10uF | Capacitor_SMD:C_0805_2012Metric_Pad1.15x1.40mm_HandSolder | C2 |
| 1 | 1500 | Resistor_SMD:R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R21 |
| 1 | 220 | Resistor_SMD:R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R17 |
| 1 | 22k | Resistor_SMD:R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R5 |
| 1 | 470 | Resistor_SMD:R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R19 |
| 1 | ADuM1201AR | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U3 |
| 1 | AMS1117-5.0 | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | U1 |
| 1 | Arduino_Nano_v3.x | Module:Arduino_Nano | A1 |
| 1 | B0505S-1W | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | U2 |
| 1 | Buzzer | Buzzer_Beeper:Buzzer_Murata_PKMCS0909E4000-R1 | BZ1 |
| 1 | EXP PWR SELECT | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J6 |
| 1 | EXPANSION HEADER | Connector_PinSocket_2.54mm:PinSocket_1x05_P2.54mm_Vertical | J9 |
| 1 | FT817_ACC | Connector_PinHeader_2.54mm:PinHeader_1x05_P2.54mm_Horizontal | J1 |
| 1 | GND | Connector_PinHeader_2.54mm:PinHeader_1x01_P2.54mm_Vertical | J5 |
| 1 | K16 CW processor | Package_DIP:DIP-8_W7.62mm_Socket | J4 |
| 1 | KEY_IN | CUI_SJ1-3525N:CUI_SJ1-3525N | J3 |
| 1 | KEY_OUT | CUI_SJ1-3525N:CUI_SJ1-3525N | J2 |
| 1 | Nokia_5110_LCD | Nokia_5110-3310_LCD_AWmods:Nokia_5110-3310_LCD | U4 |
| 1 | ON_OFF | Button_Switch_THT:SW_Slide_1P2T_CK_OS102011MS2Q | SW10 |
| 1 | PRGM | Button_Switch_THT:SW_Slide_1P2T_CK_OS102011MS2Q | SW11 |
| 1 | Polyfuse_Small | Fuse:Fuse_1206_3216Metric_Pad1.42x1.75mm_HandSolder | F1 |
| 1 | ULN2803A | Package_SO:SOIC-18W_7.5x11.6mm_P1.27mm | U5 |
The 70 most common of 76 parts.

GadgetReboot/GR_ISO_Board
Isolation breakout board with a 5V isolated DC-DC converter, optocouplers, Relay, and more.

rivotmotors-rnd/ECU_Firmware_V3
RIVOT ECU V3.0 Repo containing STM32F446RE firmware and KiCad PCB hardware designs.

kwiecinski/BMS-and-offgrid-photovoltaic-management-system
Project contains BMS for lead-acid batteries and ESP-based board used to pull information from EASUN offgrid inverter, energy meters and sensors.





It measures 73 × 113 mm and has 2 copper layers, 1.6 mm thick.
76 parts, built around the B0505S-1W, ADUM1201AR, AMS1117-5.0 and ULN2803A. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the g7uhn/ft817_buddy repository on GitHub, at the commit this page was made from: the board is PCB/FT817_buddy_v4/FT817_buddy_v4.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the CC-BY-SA-4.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).