
MBus USB 12
greenMikeEU/shrdzm
SHRDZM (just a name, not an acronym) is an ESP8285/ESP8266 based sensor and actor integration platform.

This repository consolidates multiple projects into a single monorepo for the Ultrasound Smart Switch system.
SmartSwitch is an open-source printed circuit board by Joe-Purvis, from the Joe-Purvis/UFE repository on GitHub. It is a 4-layer board of 210 × 210 mm with 187 parts on 173 nets, routed with 771 tracks and 354 vias.
It is built around the 74LVC3G17DP, 74LVC1G125 and NMA0515DC, with the 74LVC125AD, OKR-T/3-W12-C and AD8137YRZ among its other parts. Its parts include 64 capacitors, 57 resistors, 21 ICs, 11 connectors and 6 diodes.
This repository consolidates multiple projects into a single monorepo for the Ultrasound Smart Switch system.
Upduino/ FPGA firmware, UART interface, and hardware control logic
Matlab/ Simulation, signal processing, and GUI development
SmartSwitch/ Circuit design, KiCad schematics, and hardware implementation
| Qty | Value | Footprint | References |
|---|---|---|---|
| 28 | 0.1µF | TxRx_Switch:C_1210_3225Metric_Pad1.33x2.70mm_HandSolder | C2, C10, C11, C13, C17, C20, C22, C24, C26, C27, C28, C29, C31, C33, C35, C38 +12 |
| 25 | 10µF | TxRx_Switch:C_1210_3225Metric_Pad1.33x2.70mm_HandSolder | C1, C3, C5, C12, C15, C16, C19, C21, C23, C25, C30, C32, C36, C43, C44, C48 +9 |
| 8 | MountingHole | MountingHole:MountingHole_3.2mm_M3 | H1, H2, H3, H4, H5, H6, H7, H8 |
| 8 | TestPoint | TestPoint:TestPoint_Keystone_5000-5004_Miniature | TP1, TP2, TP3, TP4, TP7, TP8, TP9, TP10 |
| 7 | 100kΩ | TxRx_Switch:0805_2012Metric | R5, R6, R13, R14, R15, R55, R56 |
| 6 | 10kΩ | TxRx_Switch:0805_2012Metric | R25, R26, R27, R31, R32, R48 |
| 6 | 10Ω | TxRx_Switch:0805_2012Metric | R1, R2, R3, R4, R7, R8 |
| 5 | Conn_Coaxial | TxRx_Switch:SMA_Amphenol_132134_Vertical | J3, J4, J5, J7, J8 |
| 4 | 10,000pF | TxRx_Switch:C_1210_3225Metric_Pad1.33x2.70mm_HandSolder | C14, C63, C64, C69 |
| 4 | 470Ω | TxRx_Switch:0805_2012Metric | R46, R50, R51, R61 |
| 4 | FCP380N60 | Package_TO_SOT_THT:TO-220-3_Vertical | Q1, Q2, Q5, Q6 |
| 3 | 10 pF | TxRx_Switch:C_1210_3225Metric_Pad1.33x2.70mm_HandSolder | C18, C34, C70 |
| 3 | 330 Ω | TxRx_Switch:0805_2012Metric | R29, R30, R34 |
| 3 | 49.9 Ω | TxRx_Switch:0805_2012Metric | R43, R44, R45 |
| 3 | 74LVC3G17 | Package_SO:TSSOP-8_3x3mm_P0.65mm | U11, U12, U17 |
| 3 | Conn_ECM302604R | TxRx_Switch:Connector, ECM202604R | J9, J10, J11 |
| 3 | PESD5V0S1UL | Diode_SMD:D_SOD-882 | D3, D4, D5 |
| 3 | SW_Push | TxRx_Switch:SW_Push_1P1T_NO_CK_KMR2 | SW1, SW2, SW3 |
| 2 | 0 Ω | TxRx_Switch:0805_2012Metric | R57, R58 |
| 2 | 1 kΩ | TxRx_Switch:0805_2012Metric | R35, R49 |
| 2 | 1,000pF | TxRx_Switch:C_1210_3225Metric_Pad1.33x2.70mm_HandSolder | C65, C66 |
| 2 | 100Ω | TxRx_Switch:0805_2012Metric | R11, R12 |
| 2 | 1kΩ | TxRx_Switch:0805_2012Metric | R22, R23 |
| 2 | 22 Ω | TxRx_Switch:0805_2012Metric | R16, R59 |
| 2 | 22kΩ | TxRx_Switch:0805_2012Metric | R9, R10 |
| 2 | 2kΩ | TxRx_Switch:0805_2012Metric | R24, R60 |
| 2 | 330Ω | TxRx_Switch:0805_2012Metric | R28, R33 |
| 2 | 4.3kΩ | TxRx_Switch:0805_2012Metric | R18, R20 |
| 2 | 4.7 kΩ | TxRx_Switch:0805_2012Metric | R17, R19 |
| 2 | 74LVC1G125 | Package_TO_SOT_SMD:SOT-23-5_HandSoldering | U9, U24 |
| 2 | ADA4891 | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U7, U8 |
| 2 | ADuM4121 | TxRx_Switch:SOIC | U1, U3 |
| 2 | IRLZ44NPBF | Package_TO_SOT_THT:TO-220-3_Vertical | Q3, Q4 |
| 2 | NMA0515DC | TxRx_Switch:Converter_DCDC_Murata_NMAxxxxDC_THT | U2, U4 |
| 1 | 0Ω | TxRx_Switch:0805_2012Metric | R42 |
| 1 | 10 kΩ | Potentiometer_THT:Potentiometer_Bourns_3299W_Vertical | RV2 |
| 1 | 121Ω | TxRx_Switch:0805_2012Metric | R38 |
| 1 | 150 µF | TxRx_Switch:CP_Elec_10x12.6 | C41 |
| 1 | 2.4MΩ | TxRx_Switch:0805_2012Metric | R54 |
| 1 | 220Ω | TxRx_Switch:0805_2012Metric | R36 |
| 1 | 365Ω | TxRx_Switch:0805_2012Metric | R39 |
| 1 | 47µF | Capacitor_Tantalum_SMD:CP_EIA-7343-31_Kemet-D_HandSolder | C52 |
| 1 | 51kΩ | TxRx_Switch:0805_2012Metric | R53 |
| 1 | 56kΩ | TxRx_Switch:0805_2012Metric | R21 |
| 1 | 6.2kΩ | TxRx_Switch:0805_2012Metric | R52 |
| 1 | 74LVC125A | Package_SO:TSSOP-14_4.4x5mm_P0.65mm | U18 |
| 1 | 74LVC2G74 | TxRx_Switch:TSSOP-8_3x3mm_P0.65mm | U21 |
| 1 | AD8137 | Package_SO:JEITA_SOIC-8_3.9x4.9mm_P1.27mm | U23 |
| 1 | AD8310 | TxRx_Switch:TSSOP-8_3x3mm_P0.65mm | U22 |
| 1 | Barrel_Jack | TxRx_Switch:BarrelJack_CUI_PJ-037A_Horizontal | J2 |
| 1 | Conn_01x07 | Connector_PinHeader_2.54mm:PinHeader_1x07_P2.54mm_Vertical | J1 |
| 1 | Conn_01x10 | Connector_PinSocket_2.54mm:PinSocket_1x10_P2.54mm_Vertical | J6 |
| 1 | Ferrite bead | Inductor_SMD:L_0805_2012Metric_Pad1.15x1.40mm_HandSolder | FB1 |
| 1 | Green | LED_THT:LED_D5.0mm_IRGrey | D7 |
| 1 | LOGO | TxRx_Switch:CofA | G*** |
| 1 | LT1086-ADJ | Package_TO_SOT_THT:TO-220-3_Vertical | U15 |
| 1 | LTC1540 | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U20 |
| 1 | OKR-T/3-W12-C | TxRx_Switch:Converter_DCDC_Murata_OKR-T3-W12_Vertical | U13 |
| 1 | SS14 | Diode_SMD:D_SMA | D1 |
| 1 | SS34 | Diode_SMD:D_SMA | D8 |
| 1 | TC4422 | TxRx_Switch:SM 8-Lead_SOIJ_HandSoldering | U5 |
| 1 | TLE2426 | Package_TO_SOT_THT:TO-92L_HandSolder | U6 |
| 1 | UPduino Rev 3.1 | TxRx_Switch:UPduino_v3p1_Module_48Pin_Alt | U10 |

greenMikeEU/shrdzm
SHRDZM (just a name, not an acronym) is an ESP8285/ESP8266 based sensor and actor integration platform.

nanographs/Open-Beam-Interface
Just what you need to control the beam and get an image.

MEGA65/mega65-r3-expansion-board
Expansion board for the MEGA65 R3+ Main Boards





angusgbishop/PnPCAM
An Open Source Vision Camera designed for pick-and-place machines.
It measures 210 × 210 mm and has 4 copper layers, 1.6 mm thick.
187 parts, built around the 74LVC3G17DP, 74LVC1G125, NMA0515DC and 74LVC125AD. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the Joe-Purvis/UFE repository on GitHub, at the commit this page was made from: the board is SmartSwitch/KiCad/MainBoard/SmartSwitch.kicad_pcb and its schematic SmartSwitch/KiCad/MainBoard/Control.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask Joe-Purvis before reusing the design.