
Spr23e bmu
derlucae98/spr23e-bmu
Battery Management Unit for the Scuderia Mensa SPR23e/SPR24e electric race car

ATARI 8-Bit Stuff XL, XE
Atari23MTS Upgrade is an open-source printed circuit board by gianlucarenzi, from the gianlucarenzi/AT2019 repository on GitHub. It is a 2-layer board of 98 × 119.5 mm with 92 parts on 130 nets.
It is built around the 74LVC2G08, 74HCT04D and 74LVC2G32DP, with the 74LVC2G74DP among its other parts. Its parts include 24 capacitors, 16 resistors, 14 ICs, 7 connectors and 5 diodes. It belongs with the retro computing and games boards and the STM32 boards of this library.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 17 | 100n | Capacitors_SMD:C_1206_HandSoldering | C4, C5, C8, C10, C11, C12, C13, C14, C15, C18, C19, C20, C21, C22, C23, C24 +1 |
| 10 | CONN_01X02 | Pin_Headers:Pin_Header_Straight_1x02 | DISABLE.MODE.1, DISABLE.MODE.2, P7, P8, P9, P10, P11, P12, P13, P14 |
| 6 | 220 | Resistors_SMD:R_1206_HandSoldering | R3, R6, R8, R9, R11, R16 |
| 5 | TXB0108-PW | Housings_SSOP:SSOP-20_4.4x6.5mm_Pitch0.65mm | U2, U3, U4, U5, U6 |
| 4 | 0 | Resistors_SMD:R_1206_HandSoldering | R5, R10, R14, R15 |
| 4 | 10K | Resistors_SMD:R_1206_HandSoldering | R2, R4, R12, R13 |
| 4 | 20p | Capacitors_SMD:C_1206_HandSoldering | C6, C7, C16, C17 |
| 4 | CONN_01X01 | RetroBitLab:MountingHole | P2, P3, P4, P5 |
| 3 | CONN_01X03 | Pin_Headers:Pin_Header_Straight_1x03 | FT232RPi.1, JP1, JP2 |
| 3 | CONN_01X04 | Pin_Headers:Pin_Header_Angled_1x04 | EXTPWR1, STLinkV2.1, STLinkV2.2 |
| 2 | 8Mhz | RetroBitLab:Crystal_HC49-4H_Vertical_3D | XT1, XT2 |
| 2 | INDUCTOR_SMALL | Choke_SMD:Choke_SMD_1206_Handsoldering | L1, L2 |
| 2 | ISSI61WV5128BL | RetroBitLab:SOP-32L-20.5x11.30-1.27mm | U7, U8 |
| 2 | LED.GREEN | LEDs:LED_1206 | D3, D5 |
| 2 | STM32F407VGTx | Housings_QFP:TQFP-100_14x14mm_Pitch0.5mm | U13, U14 |
| 2 | SW_Push | RetroBitLab:SW_SPST_FSMSM_3D | SW1, SW2 |
| 1 | 10u | Capacitors_SMD:c_elec_5x5.3 | C1 |
| 1 | 22u | Capacitors_SMD:c_elec_5x5.3 | C2 |
| 1 | 330 | Resistors_SMD:R_1206_HandSoldering | R1 |
| 1 | 47k | Resistors_SMD:R_1206_HandSoldering | R7 |
| 1 | 47u | Capacitors_SMD:c_elec_5x5.3 | C3 |
| 1 | 74HCT04 | Housings_SSOP:SSOP-14_5.3x6.2mm_Pitch0.65mm | U9 |
| 1 | 74LVC2G08 | Housings_SSOP:TSSOP-8_3x3mm_Pitch0.65mm | U11 |
| 1 | 74LVC2G32 | Housings_SSOP:TSSOP-8_3x3mm_Pitch0.65mm | U10 |
| 1 | 74LVC2G74 | Housings_SSOP:TSSOP-8_3x3mm_Pitch0.65mm | U12 |
| 1 | ATARI-CARTRIDGE | RetroBitLab:ATARI-LEFT-CARTRIDGE | CART1 |
| 1 | ATARICARTRIDGE | RetroBitLab:TE_5530843-2_15X2_CART_EDGE_CONNECTOR | CART2 |
| 1 | CONN_01X01 | Measurement_Points:Measurement_Point_Round-SMD-Pad_Small | P6 |
| 1 | CONN_01X01 | Pin_Headers:Pin_Header_Straight_1x01 | P1 |
| 1 | ECIBUS | RetroBitLab:ATARI-XE-ECI-SLOT | ECI1 |
| 1 | ECIBUS | RetroBitLab:TE_5530843-2_7X2_EDGE_CONNECTOR | ECI2 |
| 1 | LED.RED | LEDs:LED_1206 | D4 |
| 1 | LRED | LEDs:LED_1206 | D1 |
| 1 | LYELLOW | LEDs:LED_1206 | D2 |
| 1 | Micro_SD_Card_Det | RetroBitLab:microSD_HC_Hirose_DM3D-SF | J9 |
| 1 | NCP1117ST33T3G | TO_SOT_Packages_SMD:SOT-223 | U1 |

derlucae98/spr23e-bmu
Battery Management Unit for the Scuderia Mensa SPR23e/SPR24e electric race car




dennisperry/RC2014_PCBs
A group of RC2014 PCBs I've designed to expand my system


angusgbishop/PnPCAM
An Open Source Vision Camera designed for pick-and-place machines.

It measures 98 × 119.5 mm and has 2 copper layers, 1.6 mm thick.
92 parts, built around the 74LVC2G08, 74HCT04D, 74LVC2G32DP and 74LVC2G74DP. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the gianlucarenzi/AT2019 repository on GitHub, at the commit this page was made from: the board is atari23MTS_Upgrade.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask gianlucarenzi before reusing the design.