4 layers82.5 × 81.5 mm
4 layers35.2 × 68 mm
FanController
aleksul/FanControllerOpenSource fan controller for your PC
- Size
- 35.2 × 68 mm
- Copper layers
- 4
- Thickness
- 1.6 mm
- Parts
- 54
- Nets
- 54
- Pads
- 208
- Tracks, vias
- 595, 98
- Pours
- 333
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 17 Jul 2021
- Updated
- 17 Jul 2021
Overview
FanController is an open-source printed circuit board by aleksul, from the aleksul/FanController repository on GitHub, published under the MIT licence. It is a 4-layer board of 35.2 × 68 mm with 54 parts on 54 nets, routed with 595 tracks and 98 vias.
It is built around the 74LVC2G32DP, 74HC595 and AMS1117-3.3, with the IRLML6244 and BAT54CL among its other parts. Its parts include 15 resistors, 10 capacitors, 8 connectors, 7 ICs and 6 transistors. It belongs with the STM32 boards of this library.
Main components
5
74LVC2G32DP
TSSOP-8-40℃~+125℃ 1.65V~5.5V 1.7V~2V 2 2 3.2ns@5V,50pF 3.8V~4.1V 32mA 32mA 430mV~550mV 4uA 74LVC Series OR Gate TSSOP-8 Logic Gates ROHSNexperiaLogic Gates
74HC595
SOP-16-40℃~+85℃ 1 100ns@5V,50pF 10MHz 2V~6V 74HC 8 Serial-to-Serial or Parallel Tri-State SOP-16 Shift Registers ROHSGRShift Registers
AMS1117-3.3
SOT-223-40℃~+125℃ 0.003%Vout 1 1.1V@(800mA) 15V 1A 3.3V 5mA 72dB@(120Hz) Fixed Over Current Protection、Short Circuit Protection、Thermal shutdown Positive SOT-223 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSAdvanced Monolithic SystemsVoltage Regulators - Linear, Low Drop Out (LDO) Regulators
IRLML6244
SOT-23-55℃~+150℃ 1 N-channel 1.1V 1.3W 20V 21mΩ@4.5V 6.3A 700pF 8.9nC@4.5V 98pF SOT-23 MOSFETs ROHSGuangdong HottechMOSFETsBAT54CL
SOT-23-55℃~+125℃ 1 Pair Common Cathode 200mA 2uA@25V 30V 600mA 800mV@100mA SOT-23 Schottky Diodes ROHSonsemiSchottky Diodes
README
README.mdFanController
Parts
54| Qty | Value | Footprint | References |
|---|---|---|---|
| 13 | 10K | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R1, R2, R3, R4, R5, R6, R7, R8, R9, R10, R11, R13, R14 |
| 6 | 100nF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C1, C2, C3, C4, C7, C10 |
| 6 | 47053-1000 | 470531000:470531000 | J2, J3, J4, J5, J7, J8 |
| 6 | IRLML6244 | Package_TO_SOT_SMD:SOT-23_Handsoldering | Q1, Q2, Q3, Q4, Q5, Q6 |
| 4 | MountingHole_2.2mm_M2 | MountingHole:MountingHole_2.2mm_M2 | M1, M2, M3, M4 |
| 3 | 74LVC2G32 | Package_SO:VSSOP-8_2.3x2mm_P0.5mm | U1, U3, U5 |
| 2 | TBD | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C5, C6 |
| 1 | 10uF | Capacitor_SMD:C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C8 |
| 1 | 16MHz | Crystal:Crystal_SMD_2520-4Pin_2.5x2.0mm | Y1 |
| 1 | 200R | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R12 |
| 1 | 22uF | Capacitor_SMD:C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C9 |
| 1 | 330R | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R15 |
| 1 | 350211-1 | 350211-1:350211-1 | U4 |
| 1 | 74HC595 | Package_SO:SOIC-16_3.9x9.9mm_P1.27mm | U7 |
| 1 | AMS1117-3.3 | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | U6 |
| 1 | BAT54CL | Package_TO_SOT_SMD:SOT-23_Handsoldering | D2 |
| 1 | LED | LED_SMD:LED_1206_3216Metric_Pad1.42x1.75mm_HandSolder | D1 |
| 1 | PROG_CONN | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J1 |
| 1 | Reset | TS-1187A-B-A-B:SW_TS-1187A-B-A-B | SW1 |
| 1 | STM32F042G6Ux | Package_DFN_QFN:QFN-28_4x4mm_P0.5mm | U2 |
| 1 | USB_B_Micro | Connector_USB:USB_Micro-B_Molex-105017-0001 | J6 |
Similar boards
- 2 layers98 × 119.5 mm
- 4 layers65 × 56 mm
- 4 layers157 × 100 mm
Spr23e bmu
derlucae98/spr23e-bmu
Battery Management Unit for the Scuderia Mensa SPR23e/SPR24e electric race car
433 parts1MIT - 2 layers
- 2 layers104 × 48.5 mm
RC2014-CTC DS1302-TIMER V21
dennisperry/RC2014_PCBs
A group of RC2014 PCBs I've designed to expand my system
30 parts - 4 layers174 × 71 mm
DrinkMix CM4 Prototype
wbsipz/hardware-design-portfolio
Hardware design portfolio featuring power electronics, embedded control, and PCB projects.
134 parts - 4 layers110 × 80 mm
PNP MOBO V2
GabrielD98/PickUS_and_PlacUS
pick and place de PCB pour projet S4 de robotique
126 parts5MIT
Questions
How big is the FanController PCB?
It measures 35.2 × 68 mm and has 4 copper layers, 1.6 mm thick.
What parts does the FanController use?
54 parts, built around the 74LVC2G32DP, 74HC595, AMS1117-3.3 and IRLML6244. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the FanController KiCad files?
From the aleksul/FanController repository on GitHub, at the commit this page was made from: the board is hardware/fan-controller.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the FanController design in my own project?
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).