Skip to the content
2 layers100 × 100 mmADA4898 LNA, the printed circuit board in 3D

Low Noise Amplifier based on ADA4898

Size
100 × 100 mm
Copper layers
2
Thickness
1.6 mm
Parts
618
Nets
83
Pads
1,004
Tracks, vias
1,070, 162
Pours
4
Routed
Yes
KiCad
KiCad 9.0 (file 20241229)
Created
9 Nov 2022
Updated
16 Nov 2025

Overview

ADA4898 LNA is an open-source printed circuit board by aewallin, from the aewallin/ADA4898_LNA repository on GitHub. It is a 2-layer board of 100 × 100 mm with 618 parts on 83 nets, routed with 1,070 tracks and 162 vias.

It is built around the ADA4898-2YRD, ADA4898-1YRD and LT1963AEQ, with the LT3015EQ among its other parts. Its parts include 96 capacitors, 75 resistors, 15 connectors, 14 ICs and 4 diodes.

Main components

4

README

README.md

Parts

618
QtyValueFootprintReferences
409VIA_0.4mmDrill_0.7mmPadawallinKiCadFootprints:VIA_0.4mmDrill_0.7mmPadVIA, VIA, VIA, VIA, VIA, VIA, VIA, VIA, VIA, VIA, VIA, VIA, VIA, VIA, VIA, VIA +393
54CCapacitors_SMD:C_1210C1101, C1102, C1103, C1104, C1105, C1106, C1107, C1108, C1109, C1110, C1111, C1112, C1113, C1114, C1115, C1116 +38
48RResistors_SMD:R_0603R203, R204, R205, R206, R207, R208, R303, R304, R305, R306, R307, R308, R403, R404, R405, R406 +32
35CCapacitors_SMD:C_0805C101, C102, C103, C104, C105, C106, C110, C111, C112, C113, C114, C115, C116, C117, C1221, C1222 +19
11RResistors_SMD:R_0805R106, R114, R117, R118, R120, R1201, R1202, R1203, R1204, R1205, R1206
8ADA4898-2Housings_SOIC:SOIC-8-1EP_3.9x4.9mm_Pitch1.27mmU201, U301, U401, U501, U601, U701, U801, U901
4ADA4898-1Housings_SOIC:SOIC-8-1EP_3.9x4.9mm_Pitch1.27mmU101, U102, U103, U104
4CONN_01X01Mounting_Holes:MountingHole_3.2mm_M3_DIN965_PadJ101, J102, J103, J104
310kResistors_SMD:R_0805R105, R108, R113
31kResistors_SMD:R_0805R107, R109, R112
2120RResistors_SMD:R_0805R102, R103
2499RResistors_SMD:R_0805R110, R115
249k9Resistors_SMD:R_0805R111, R116
26u8Capacitors_SMD:C_1210C132, C133
2BNCawallinKiCadFootprints_git:BNC_2PINP101, P105
2BNX025_FILTERawallinKiCadFootprints:FILTER_BNX025F1201, F1202
2CM-CHOKEawallinKiCadFootprints:CM-CHOKET1201, T1202
2CONN_02X04Pin_Headers:Pin_Header_Straight_2x04_Pitch2.54mm_SMDP103, P106
2DawallinKiCadFootprints:DIODE_DO-214BAD1201, D1202
2HEATSINKawallinKiCadFootprints:Heatsink_Fisher_TO263J1202, J1203
2LEDDiodes_SMD:D_0805D1203, D1204
2SMAawallinKiCadFootprints:CONNECTOR_SMA_StraightP102, P107
10RResistors_SMD:R_0805R121
1120pCapacitors_SMD:C_0805C109
1150nCapacitors_SMD:C_0805C107
1150nCapacitors_SMD:C_1210C135
11MResistors_SMD:R_0805R101
11n5Capacitors_SMD:C_0805C108
11u5Capacitors_SMD:C_1210C134
149R9Resistors_SMD:R_0805R119
1600RResistors_SMD:R_0805R104
1CONN_01X03awallinKiCadFootprints:CONNECTOR_01x03_200milJ1201
1HI-BW_SELECTPin_Headers:Pin_Header_Straight_2x04_Pitch2.54mm_SMDP104
1LO-BW_SELECTPin_Headers:Pin_Header_Straight_2x04_Pitch2.54mm_SMDP108
1LT1963ATO_SOT_Packages_SMD:TO-263-5_TabPin3U1201
1LT3015TO_SOT_Packages_SMD:TO-263-5_TabPin3U1202

The 617 most common of 618 parts.

Similar boards

  • 2 layers170 × 70 mmFda 2017.03, the printed circuit board in 3D

    Fda 2017.03

    openfnord/pda-8ch-fda-8ch

    417 parts
  • 2 layers160 × 100 mmPIAD-18bits, the printed circuit board in 3D

    PIAD-18bits

    lnls-sirius/SPIxCONV

    This project consists of an 18-bit analog input (ADC) and output (DAC) within a range of 20 V (± 10 V) and 32 digital pins that can be either as inputs or outputs.

    178 parts1MIT
  • 2 layers20 × 30 mmSFH203 photodetector, the printed circuit board in 3D

    SFH203 photodetector

    TU-Darmstadt-APQ/SFH203_photodetector

    Low-noise transimpedance amplifier optimized for the photodiode SFH203.

    19 parts8
  • 2 layers160 × 100 mmMTS module, the printed circuit board in 3D

    MTS module

    TU-Darmstadt-APQ/MTS_module

    Module for AOM-based modulation transfer spectroscopy (MTS) signal generation.

    131 parts3
  • 2 layers160 × 100 mmPDH module, the printed circuit board in 3D

    PDH module

    TU-Darmstadt-APQ/PDH-module

    Produces a PDH error-signal using MiniCircuits SYPD-1+ phase detector and LT1568 4th order low-pass filter. To be used with a AD9959 DDS board.

    85 parts2
  • 2 layers161.8 × 100 mmEinstein boltzmann, the printed circuit board in 3D

    Einstein boltzmann

    CarlosCraveiro/einstein-boltzmann

    Remake of the board of the 5-th EPO (2017), using KiCAD 7.0, to measure the Boltzmann constant through the analysis of the thermal noise of a resistor.

    63 parts1CERN-OHL-S-2.0
  • 2 layers100 × 99 mmSfp v4, the printed circuit board in 3D

    Sfp v4

    aewallin/SFP2SMA_2018.03

    SFP to SMA board for E/O and O/E conversion of signals using SFP telecom optics

    103 parts7

Questions

How big is the ADA4898 LNA PCB?

It measures 100 × 100 mm and has 2 copper layers, 1.6 mm thick.

What parts does the ADA4898 LNA use?

618 parts, built around the ADA4898-2YRD, ADA4898-1YRD, LT1963AEQ and LT3015EQ. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the ADA4898 LNA KiCad files?

From the aewallin/ADA4898_LNA repository on GitHub, at the commit this page was made from: the board is ADA4898_LNA.kicad_pcb and its schematic ADA4898_LNA.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the ADA4898 LNA design in my own project?

Its repository states no licence, so its author keeps all rights: ask aewallin before reusing the design.