Skip to the content
123456

LT3015EQ

Analog Devices

-1.22V to -29.3V, 1.5A, Low Noise, Negative Linear Regulator with Precision Current Limit

Part id
adi/LT3015EQ
Category
Uncategorised
Package
TO-263-5
Pins
6
Used on
5 open-source boards

Overview

The LT3015EQ is an uncategorised made by Analog Devices in a TO-263-5 package with 6 pins. -1.22V to -29.3V, 1.5A, Low Noise, Negative Linear Regulator with Precision Current Limit.

PCBKit's library has its KiCad symbol (Regulators:LT3015EQ, from CERN's library) and its footprint (Package_TO_SOT_SMD:TO-263-5_TabPin6, from KiCad's library), ready for a KiCad board. 5 open-source boards in 3 repositories on GitHub use it.

Symbol

3IN6IN1SHDN2GND5OUT4ADJ
Regulators:LT3015EQFrom CERN's library

Footprint

123456
Package_TO_SOT_SMD:TO-263-5_TabPin6From KiCad's library

Pinout

6
The pins of the LT3015EQ
PinNameType
1SHDNInput
2GNDPower in
3INInput
4ADJInput
5OUTPower in
6INInput

Open-source boards using it

5
  • 2 layers100 × 100 mmADA4898 LNA, the printed circuit board in 3D

    ADA4898 LNA

    aewallin/ADA4898_LNA

    Low Noise Amplifier based on ADA4898

    618 parts2
  • 2 layers160 × 100 mmPIAD-18bits, the printed circuit board in 3D

    PIAD-18bits

    lnls-sirius/SPIxCONV

    This project consists of an 18-bit analog input (ADC) and output (DAC) within a range of 20 V (± 10 V) and 32 digital pins that can be either as inputs or outputs.

    178 parts1MIT
  • 2 layers170 × 70 mmFda 2017.03, the printed circuit board in 3D

    Fda 2017.03

    openfnord/pda-8ch-fda-8ch

    417 parts
  • 2 layers160 × 70 mmFda 2017.03, the printed circuit board in 3D

    Fda 2017.03

    openfnord/pda-8ch-fda-8ch

    401 parts
  • 2 layers170 × 70 mmFda EP, the printed circuit board in 3D

    Fda EP

    openfnord/pda-8ch-fda-8ch

    417 parts

Parts like it

8

Questions

Is there a KiCad symbol and footprint for the LT3015EQ?

Yes. The symbol is Regulators:LT3015EQ and the footprint Package_TO_SOT_SMD:TO-263-5_TabPin6, both drawn on this page. PCBKit places them on a board for you when you design with it.

What package is the LT3015EQ?

TO-263-5, with 6 pins. Its footprint is drawn on this page.

What can replace the LT3015EQ?

Parts like it in the library: the CBM1764DT-ADJ by Corebai Microelectronics, the COS29302WU by COSINE, the SPX29302T5(XBLW) by XBLW and the COS29752WU by COSINE. Check their datasheets: a part that fits the footprint may still differ in its ratings.

Which open-source boards use the LT3015EQ?

5 boards in 3 repositories on GitHub; the most starred are listed on this page, with their KiCad files.