Skip to the content
2 layers100 × 99 mmSfp v4, the printed circuit board in 3D

SFP to SMA board for E/O and O/E conversion of signals using SFP telecom optics

Size
100 × 99 mm
Copper layers
2
Thickness
1.6 mm
Parts
103
Nets
74
Pads
317
Tracks, vias
536, 254
Pours
12
Routed
Yes
KiCad
KiCad 9.0 (file 20241229)
Created
24 Oct 2018
Updated
22 Oct 2025

Overview

Sfp v4 is an open-source printed circuit board by aewallin, from the aewallin/SFP2SMA_2018.03 repository on GitHub. It is a 2-layer board of 100 × 99 mm with 103 parts on 74 nets, routed with 536 tracks and 254 vias.

It is built around the LMH6702MF, 74HC14 and LT1963AEQ, with the ADT2-1T-1P+ among its other parts. Its parts include 34 resistors, 32 capacitors, 9 diodes, 8 inductors and 7 ICs.

Main components

4

README

README.md

SFP-2-SMA Board, 2018-03

This is a simple board for opto/electric and electro/optic conversion of RF-signals (up to maybe 500 MHz) using telecom SFP transcievers. The board can be fitted with either BNC or SMA connectors. It has one input which modulates the TX pins of the SFP, and two identical outputs that represent the signal on the RX pins of the SFP.

Some notes from 2018-04: http://www.anderswallin.net/2018/04/500-mhz-sfp-board-v4/

Circuit description

Differential (100 Ohm) signals on the TX+/TX- and RX+/RX- pins of the SFP are converted to single-ended (50 Ohm) signals using Mini-Circuits ADT2-1T transformers. LMH6702 op-amps amplify/buffer all signals. LT1963 and LT3015 low-noise LDOs provide +3V3, +6V, and -6V DC rails. The +3V3 LDO needs heat-sinking, especially with long-range SFPs that have high current draw.

Links to other SFP-boards

Parts

103
QtyValueFootprintReferences
16100nCapacitors_SMD:C_0805C101, C102, C103, C104, C107, C108, C111, C112, C113, C114, C115, C116, C117, C119, C120, C122
1410uCapacitors_SMD:C_0805C105, C106, C109, C110, C118, C121, C123, C124, C203, C204, C205, C207, C208, C209
8150RResistors_SMD:R_0805R119, R120, R121, R122, R133, R134, R135, R136
610RResistors_SMD:R_0805R118, R123, R124, R126, R137, R138
62u2Resistors_SMD:R_0805L101, L102, L103, L104, L107, L108
510kResistors_SMD:R_0805R107, R109, R110, R113, R115
3200RResistor_SMD:R_0805_2012MetricR129, R130, R131
3DawallinKiCadFootprints:DIODE_DO-214BAD201, D202, D206
3LEDLEDs:LED_0805D203, D204, D205
3LEDLED_SMD:LED_0805_2012MetricD101, D102, D103
3LMH6702Housings_SOIC:SOIC-8_3.9x4.9mm_Pitch1.27mmU101, U102, U103
3SMAConnector_Coaxial:SMA_Molex_73251-2200_HorizontalJ102, J104, J106
3TestPoint_2PoleTestPoint:TestPoint_2Pads_Pitch2.54mm_Drill0.8mmTP201, TP202, TP203
2180RResistors_SMD:R_0805R207, R208
21uResistors_SMD:R_0805L105, L106
2200RResistors_SMD:R_0805R108, R117
22k7Resistors_SMD:R_0805R201, R203
250RResistors_SMD:R_0805R125, R139
2680RResistors_SMD:R_0805R202, R204
2ADT2-1TawallinKiCadFootprints_git:MiniCircuits_CD542T101, T102
2CONN_01X01Mounting_Holes:MountingHole_3mmP103, P106
1100nCapacitor_SMD:C_0805_2012MetricC125
110nCapacitors_SMD:C_0805C206
151RResistors_SMD:R_0805R102
168RResistors_SMD:R_0805R209
174HC14Package_SO:TSSOP-14_4.4x5mm_P0.65mmU104
1Conn_01x04TerminalBlock:TerminalBlock_bornier-4_P5.08mmJ201
1Heatsink_PadHeatsink:Heatsink_Fischer_FK24413D2PAK_26x13mmHS203
1LT1963AEQPackage_TO_SOT_SMD:TO-263-5_TabPin3U201
1LT1963AxQ-3.3Package_TO_SOT_SMD:TO-263-5_TabPin3U203
1LT3015QPackage_TO_SOT_SMD:TO-263-5_TabPin3U202
1SFP-CONNECTORawallinKiCadFootprints:Connector_SFP_and_CageP101

Similar boards

  • 2 layers170 × 70 mmFda 2017.03, the printed circuit board in 3D

    Fda 2017.03

    openfnord/pda-8ch-fda-8ch

    417 parts
  • 4 layers95 × 77.5 mmRadar flight, the printed circuit board in 3D

    Radar flight

    UWCubeSat/hs2-gpr-hardware

    147 parts
  • 2 layersDisplacement PCB, the printed circuit board in 3D

    Displacement PCB

    RavingRoss/Varner-Lab

    This repo includes work from the Varner Instrumentation Development Lab located at UH at Manoa in Honolulu. We are collaborating with the Belle II program at the SuperKEKB accelerator complex at KEK, working on TOP and…

    76 partsGPL-3.0
  • 2 layersT41-Main+RF board V012, the printed circuit board in 3D

    T41-Main+RF board V012

    DRWJSCHMIDT/T41

    This is the repository for the officially released V10, V11, and V12 versions of the T41 Software Defined Transceiver hardware and kits.

    255 parts66
  • 4 layers100 × 100 mmT41, the printed circuit board in 3D

    T41

    ai6ym/t41

    T41-EP SDT Files

    234 parts10
  • 2 layers37.6 × 23.4 mmBalun, the printed circuit board in 3D

    Balun

    loxodes/vna

    Under development open hardware microwave vector network analyzer

    7 parts205
  • 4 layers100 × 100 mmT41-RF board V012, the printed circuit board in 3D

    T41-RF board V012

    K0RGI/T41-K9HZ

    This is the repository for the officially released V10, V11, and V12 versions of the T41 Software Defined Transceiver hardware and kits.

    232 parts1GPL-3.0
  • 4 layers92 × 92 mmRtihu, the printed circuit board in 3D

    Rtihu

    AMSAT-NA/PacSatDocs

    395 parts4

Questions

How big is the Sfp v4 PCB?

It measures 100 × 99 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Sfp v4 use?

103 parts, built around the LMH6702MF, 74HC14, LT1963AEQ and ADT2-1T-1P+. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Sfp v4 KiCad files?

From the aewallin/SFP2SMA_2018.03 repository on GitHub, at the commit this page was made from: the board is sfp_v4.kicad_pcb and its schematic SFP_PSU.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Sfp v4 design in my own project?

Its repository states no licence, so its author keeps all rights: ask aewallin before reusing the design.