Skip to the content
123345

LT1963AEQ

Analog Devices

Adjustable, 1.5A, Fast Transient Response, LDO Regulator

Part id
adi/LT1963AEQ
Category
Uncategorised
Package
TO-263-5
Pins
6
Used on
16 open-source boards

Overview

The LT1963AEQ is an uncategorised made by Analog Devices in a TO-263-5 package with 5 pins. Adjustable, 1.5A, Fast Transient Response, LDO Regulator.

PCBKit's library has its KiCad symbol (Regulator_Linear:LT1963AEQ, from KiCad's library) and its footprint (Package_TO_SOT_SMD:TO-263-5_TabPin3, from KiCad's library), ready for a KiCad board. 16 open-source boards in 11 repositories on GitHub use it.

Symbol

1SHDN2IN3GND4OUT5ADJ
Regulator_Linear:LT1963AEQFrom KiCad's library

Footprint

123345
Package_TO_SOT_SMD:TO-263-5_TabPin3From KiCad's library

Pinout

5
The pins of the LT1963AEQ
PinNameType
1SHDNInput
2INPower in
3GNDPower in
4OUTPower out
5ADJInput

Open-source boards using it

16See all 16
  • 2 layers100 × 99 mmSfp v4, the printed circuit board in 3D

    Sfp v4

    aewallin/SFP2SMA_2018.03

    SFP to SMA board for E/O and O/E conversion of signals using SFP telecom optics

    103 parts7
  • 4 layers92 × 92 mmRtihu, the printed circuit board in 3D

    Rtihu

    AMSAT-NA/PacSatDocs

    395 parts4
  • 2 layers100 × 100 mmADA4898 LNA, the printed circuit board in 3D

    ADA4898 LNA

    aewallin/ADA4898_LNA

    Low Noise Amplifier based on ADA4898

    618 parts2
  • 2 layers140 × 100 mmJugemu kai, the printed circuit board in 3D

    Jugemu kai

    AtiRoMz/JugemuKai_Kicad

    100 parts1
  • 2 layers160 × 136.5 mmSchematic Backup 9, the printed circuit board in 3D

    Schematic Backup 9

    PickyPointer/SrE

    the SrE software suite - with more jimmies

    140 parts1
  • 2 layers52.1 × 25.1 mmDIY LDO Board for QMX, the printed circuit board in 3D

    DIY LDO Board for QMX

    atoughram/LDO-Board-for-QMX

    LDO Board based on Analog LT1963AEQ for the QRP Labs QMX

    10 parts
  • 2 layers170 × 70 mmFda 2017.03, the printed circuit board in 3D

    Fda 2017.03

    openfnord/pda-8ch-fda-8ch

    417 parts
  • 4 layers92 × 92 mmRtihu, the printed circuit board in 3D

    Rtihu

    AMSAT-NA/PacSatDocs

    346 parts4

Parts like it

8

Questions

Is there a KiCad symbol and footprint for the LT1963AEQ?

Yes. The symbol is Regulator_Linear:LT1963AEQ and the footprint Package_TO_SOT_SMD:TO-263-5_TabPin3, both drawn on this page. PCBKit places them on a board for you when you design with it.

What package is the LT1963AEQ?

TO-263-5, with 5 pins. Its footprint is drawn on this page.

What can replace the LT1963AEQ?

Parts like it in the library: the MIC29302WU/HG by HGSEMI, the MIC29152WU-TP by TECH PUBLIC, the MIC29302AWU/HG by HGSEMI and the MIC29302WU(LX) by lingxingic. Check their datasheets: a part that fits the footprint may still differ in its ratings.

Which open-source boards use the LT1963AEQ?

16 boards in 11 repositories on GitHub; the most starred are listed on this page, with their KiCad files.