

Vibrator
- Size
- 71.1 × 24.8 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 22
- Nets
- 16
- Pads
- 54
- Tracks, vias
- 78, 1
- Routed
- Yes
- KiCad
- KiCad 8.0 (file 20240108)
- Created
- 25 Jan 2022
- Updated
- 30 Dec 2025
Overview
Vibrator is an open-source printed circuit board by abzman, from the abzman/small-useful-PCBs repository on GitHub, published under the Unlicense licence. It is a 2-layer board of 71.1 × 24.8 mm with 22 parts on 16 nets, routed with 78 tracks and 1 via.
It is built around the 1N5235B and FQP27P06. Its parts include 5 resistors, 5 diodes, 3 capacitors, 2 transistors and 1 IC.
Main components
2README
README.mdsmall-useful-PCBs
Parts
22| Qty | Value | Footprint | References |
|---|---|---|---|
| 3 | 1N5235B | Diode_THT:D_DO-34_SOD68_P10.16mm_Horizontal | D1, D2, D3 |
| 2 | 100nF, 100v | Capacitor_THT:C_Rect_L13.0mm_W6.0mm_P10.00mm_FKS3_FKP3_MKS4 | C2, C3 |
| 2 | 1N4007 | Diode_THT:D_DO-41_SOD81_P10.16mm_Horizontal | D4, D5 |
| 2 | 220, 1W | Resistor_THT:R_Axial_DIN0309_L9.0mm_D3.2mm_P12.70mm_Horizontal | R3, R4 |
| 2 | FQP27P06 | Package_TO_SOT_THT:TO-220-3_Horizontal_TabDown | Q1, Q2 |
| 1 | 1K | Resistor_THT:R_Axial_DIN0309_L9.0mm_D3.2mm_P12.70mm_Horizontal | R1 |
| 1 | 2.2K, 1W | Resistor_THT:R_Axial_DIN0309_L9.0mm_D3.2mm_P12.70mm_Horizontal | R6 |
| 1 | 2200uF, 16v | Capacitor_THT:C_Rect_L41.5mm_W15.0mm_P37.50mm_MKS4 | C1 |
| 1 | 22K, 1W | Resistor_THT:R_Axial_DIN0309_L9.0mm_D3.2mm_P12.70mm_Horizontal | R2 |
| 1 | 4047 | Package_DIP:DIP-14_W7.62mm_LongPads | IC1 |
| 1 | GND | TestPoint:TestPoint_Loop_D2.50mm_Drill1.0mm | TP6 |
| 1 | PRI1 | TestPoint:TestPoint_Loop_D2.50mm_Drill1.0mm | TP4 |
| 1 | PRI2 | TestPoint:TestPoint_Loop_D2.50mm_Drill1.0mm | TP5 |
| 1 | SECC | TestPoint:TestPoint_Loop_D2.50mm_Drill1.0mm | TP3 |
| 1 | TS1 | TestPoint:TestPoint_Loop_D2.50mm_Drill1.0mm | TP1 |
| 1 | TS2 | TestPoint:TestPoint_Loop_D2.50mm_Drill1.0mm | TP2 |
More from abzman/small-useful-PCBs
12- 2 layers160 × 138 mm

- 2 layers83.3 × 78.2 mm

- 2 layers83.3 × 78.2 mm

- 2 layers160 × 138 mm

- 2 layers111.8 × 88.9 mm

- 2 layers50.8 × 43.2 mm

- 2 layers160 × 138 mm

- 2 layers66 × 29.2 mm

- 2 layers59.7 × 37.5 mm

- 2 layers61 × 47 mm

- 2 layers23.6 × 20.3 mm

- 2 layers41.3 × 60.3 mm

Similar boards
- 2 layers30 × 64 mm

Radio Bottom
mattronix/battery-board
KiCad hardware project for the battery-to-radio interface of an AN/PRC‑152(A) reproduction radio. It contains two small PCBs that mate through spring‑loaded pogo‑pin contacts, plus a shared custom KiCad footprint…
12 parts8CERN-OHL-W-2.0 - 2 layers70 × 50 mm

Led light project
mattwach/portable_led_lamp
Contains firmware, schematics and 3D models for a LED lamp that can accept a wide range of voltages.
20 parts7GPL-3.0 - 2 layers66 × 53.3 mm

ESP32ScoringDevice PCB THT Rev1.2
pietwauters/esp32_scoring_device_hardware
Hardware files for the scoring device
32 parts7GPL-3.0 - 2 layers65 × 56 mm

XDoor
xHain-hackspace/xDoorPiHat
Schematics and Boardfiles for PiHat that opens and closes the xDoor
36 parts3 - 4 layers200 × 110 mm

- 2 layers78 × 103 mm

Embedded.old
borisg912/3DNA
This project creates a flat cylindrical DNA model with: - Magnetic DNA bases with color-coded NeoPixel LEDs and unique resistor values for identification - Interactive base pairing game that validates correct DNA base…
121 parts2GPL-3.0 - 2 layers47.8 × 57.9 mm

ESP8266-LolinV3-Lamp
d-diot/ESP8266-LolinV3-Lamp
A pcb for the NodeMCU Lolin V3 board with power management for a WS2812 LED strip
30 parts2 - 2 layers128 × 41.5 mm

Weather station ext
rbat05/SolarWeatherStation
Self-sustaining weather monitoring system with dual-node architecture.
16 parts2GPL-3.0
Questions
How big is the Vibrator PCB?
It measures 71.1 × 24.8 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Vibrator use?
22 parts, built around the 1N5235B and FQP27P06. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Vibrator KiCad files?
From the abzman/small-useful-PCBs repository on GitHub, at the commit this page was made from: the board is vibrator/vibrator.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Vibrator design in my own project?
Its repository publishes it under the Unlicense licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).