

DisplayBoard
- Size
- 40.5 × 43.2 mm
- Copper layers
- 4
- Thickness
- 1.6 mm
- Parts
- 47
- Nets
- 76
- Pads
- 203
- Tracks, vias
- 374, 191
- Pours
- 6
- Routed
- Yes
- KiCad
- KiCad 10.0 (file 20260206)
- Created
- 15 Nov 2025
- Updated
- 2 May 2026
Overview
DisplayBoard is an open-source printed circuit board by VogelPapaFinn, from the VogelPapaFinn/DisplayBoard_PCB repository on GitHub. It is a 4-layer board of 40.5 × 43.2 mm with 47 parts on 76 nets, routed with 374 tracks and 191 vias.
It is built around the ESP32-S3-PICO-1-N8R2, SN65HVD232D and AMS1117-3.3, with the USBLC6-2SC6, BLM18KG121TN1D and PESD1CAN among its other parts. Its parts include 15 capacitors, 12 resistors, 4 ICs, 3 connectors and 2 diodes. It belongs with the ESP32 boards of this library.
Main components
9ESP32-S3-PICO-1-N8R2
LGA-56-EP(7x7)LGA-56-EP(7x7) RF Transceiver ICs ROHSEspressif SystemsRF Transceiver ICsSN65HVD232D
SOIC-8-40℃~+85℃ 17mA 1Mbps 3.3V CAN Transceiver SOIC-8 CAN Transceivers ROHSTexas InstrumentsCAN TransceiversAMS1117-3.3
SOT-223-40℃~+125℃ 0.003%Vout 1 1.1V@(800mA) 15V 1A 3.3V 5mA 72dB@(120Hz) Fixed Over Current Protection、Short Circuit Protection、Thermal shutdown Positive SOT-223 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSAdvanced Monolithic SystemsVoltage Regulators - Linear, Low Drop Out (LDO) RegulatorsUSBLC6-2SC6
SOT-23-60.35pF、0.8pF 100nA 150W@8/20us 15V 2 5V 6A@8/20us 6V ESD SOT-23-6 ESD and Surge Protection (TVS/ESD) ROHSUMWESD And Surge Protection (TVS/ESD)BLM18KG121TN1D
06031 120Ω@100MHz 30mΩ 3A ±25% 0603 Ferrite Beads ROHSMurataFerrite BeadsPESD1CAN
SOT-23-65℃~+150℃ 11pF 1nA 2 200W@8/20us 24V 30.3V 3A@8/20us 70V Bidirectional ESD IEC 61000-4-2、IEC 61000-4-5 SOT-23 ESD and Surge Protection (TVS/ESD) ROHSNexperiaESD And Surge Protection (TVS/ESD)SP4020-01FTG-C
SOD-3231 16V 1pF 200nA 3.3V 350W@8/20us 6V Bidirectional IEC 61000-4-2、IEC 61000-4-4 TVS SOD-323 ESD and Surge Protection (TVS/ESD) ROHSTECH PUBLICESD And Surge Protection (TVS/ESD)SI2302CDS-T1-GE3-ES
SOT-23-55℃~+150℃ 1 N-channel 200pF 20V 28pF 3.3A 35pF 3nC@4.5V 400mW 45mΩ@4.5V、62mΩ@2.5V 700mV N-Channel SOT-23 MOSFETs ROHSElecSuperMOSFETsUSB4105-GF-A
SMD-40℃~+85℃ 1 12P 48V 5A Black Female Surface Mount, Right Angle Type-C USB 2.0 SMD USB Connectors ROHSGlobal Connector Technology (GCT)USB Connectors
Parts
47| Qty | Value | Footprint | References |
|---|---|---|---|
| 5 | 100nF | Capacitor_SMD:C_0805_2012Metric | C3, C6, C7, C10, C13 |
| 5 | 10k | Resistor_SMD:R_0603_1608Metric | R2, R3, R5, R6, R7 |
| 2 | 100 | Resistor_SMD:R_0603_1608Metric | R4, R12 |
| 2 | 22uF | Capacitor_SMD:C_0805_2012Metric | C2, C15 |
| 2 | 3 | Resistor_SMD:R_0603_1608Metric | R10, R11 |
| 2 | 3.3pF | Capacitor_SMD:C_0603_1608Metric | C4, C5 |
| 2 | 47uF | Capacitor_SMD:C_0805_2012Metric | C11, C12 |
| 2 | 5.1k | Resistor_SMD:R_0603_1608Metric | Rusb1, Rusb2 |
| 2 | unkwn | Capacitor_SMD:C_0805_2012Metric | C8, C9 |
| 1 | 10 | Resistor_SMD:R_0603_1608Metric | R9 |
| 1 | 100k | Resistor_SMD:R_0603_1608Metric | R8 |
| 1 | 10uF | Capacitor_SMD:C_0805_2012Metric | C14 |
| 1 | 1uF | Capacitor_SMD:C_0805_2012Metric | C1 |
| 1 | 2.2nH | Inductor_SMD:L_0603_1608Metric | L1 |
| 1 | 470 | Resistor_SMD:R_0603_1608Metric | R1 |
| 1 | AMS1117-3.3 | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | U4 |
| 1 | BLM18KG121TN1D | Inductor_SMD:L_0603_1608Metric | FB1 |
| 1 | BOOT | CustomFootprints:XUNPU_Button | SPST1 |
| 1 | Conn_01x04 | Connector_JST:JST_PH_B4B-PH-SM4-TB_1x04-1MP_P2.00mm_Vertical | J3 |
| 1 | Conn_01x16 | CustomFootprints:AFC01-S16FCC-00 | J2 |
| 1 | Conn_Coaxial | CustomFootprints:CONMHF1-SMD-G-T_U.FL | J1 |
| 1 | ESP32-S3-PICO-1-N8R2 | CustomFootprints:ESP32-S3-PICO-1 | U1 |
| 1 | PESD1CAN | Package_TO_SOT_SMD:SOT-23 | D2 |
| 1 | SN65HVD232 | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U2 |
| 1 | SP4020-01FTG-C | Resistor_SMD:R_0805_2012Metric | D1 |
| 1 | SW_SPST | CustomFootprints:XUNPU_Button | RST1 |
| 1 | Si2302CDS-T1-GE3 | Package_TO_SOT_SMD:SOT-23 | Q1 |
| 1 | SolderJumper_2_Open | Jumper:SolderJumper-2_P1.3mm_Open_Pad1.0x1.5mm | JP1 |
| 1 | SolderJumper_2_Open | Jumper:SolderJumper-2_P1.3mm_Open_RoundedPad1.0x1.5mm | JP2 |
| 1 | TDK ACT45B-510-2P-TL003 | CustomFootprints:TDK ACT45B-510-2P-TL003 | L2 |
| 1 | USB4105-GF-A | CustomFootprints:USB-C_24P-2.0 | USBC1 |
| 1 | USBLC6-2SC6 | Package_TO_SOT_SMD:SOT-23-6 | U3 |
Similar boards
- 4 layers100 × 64.9 mm

- 4 layers38 × 55 mm

- 4 layers69.8 × 98.5 mm

Headset orga
Orlandogani/pers-esp32-headset
This project was made by kicad 10.0. My first personal headset to support my several research in audio or embedded fields
136 parts - 4 layers120 × 80 mm

- 6 layers13.4 × 51.8 mm

- 4 layers83.1 × 92.5 mm

- 4 layers41.1 × 53 mm

Vacuum Tweezers
Legohead259/Vacuum-Tweezers-ECAD
KiCAD repository for the electrical designs for the SL_ST vacuum tweezer design
64 parts1MIT - 2 layers75.5 × 61 mm

Questions
How big is the DisplayBoard PCB?
It measures 40.5 × 43.2 mm and has 4 copper layers, 1.6 mm thick.
What parts does the DisplayBoard use?
47 parts, built around the ESP32-S3-PICO-1-N8R2, SN65HVD232D, AMS1117-3.3 and USBLC6-2SC6. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the DisplayBoard KiCad files?
From the VogelPapaFinn/DisplayBoard_PCB repository on GitHub, at the commit this page was made from: the board is DisplayBoard.kicad_pcb and its schematic DisplayBoard.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the DisplayBoard design in my own project?
Its repository states no licence, so its author keeps all rights: ask VogelPapaFinn before reusing the design.