2 layers50 × 31 mm
2 layers50 × 31 mm
MAGNETOMETER
USSTRocketry/Pheonix-Hardware- Size
- 50 × 31 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 9
- Nets
- 10
- Pads
- 34
- Tracks, vias
- 33, 2
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 7 (file 20221018)
- Created
- 3 Feb 2024
- Updated
- 14 Sep 2024
Overview
MAGNETOMETER is an open-source printed circuit board by USSTRocketry, from the USSTRocketry/Pheonix-Hardware repository on GitHub, published under the MIT licence. It is a 2-layer board of 50 × 31 mm with 9 parts on 10 nets, routed with 33 tracks and 2 vias.
It is built around the MMC5603NJ and M80-8770405. Its parts include 2 resistors, 1 capacitor, 1 IC and 1 connector.
Main components
2README
README.mdPheonix-Hardware
Parts
9| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | MountingHole_Pad | MountingHole:MountingHole_3.2mm_M3_ISO7380_Pad_TopBottom | H1, H2, H3, H4 |
| 2 | 2.7K | Resistor_SMD:R_0201_0603Metric | R1, R2 |
| 1 | 2.2u | Capacitor_SMD:C_0603_1608Metric | C1 |
| 1 | M80-8770405 | KiCad:M808770405 | J1 |
| 1 | MMC5603NJ | MMC5603NJ:XDCR_MMC5603NJ | IC1 |
More from USSTRocketry/Pheonix-Hardware
6- 2 layers50 × 31 mm
- 2 layers50 × 31 mm
- 2 layers50 × 31 mm
- 2 layers50 × 31 mm
- 2 layers
Similar boards
- 2 layers49.6 × 37.2 mm
- 4 layers78 × 67.5 mm
Unified pcb
starduststorm/motionhexa
PCB designs and code for a motion-reactive, battery-powered hexagonal glowy object.
387 parts14 - 6 layers22.7 × 19 mm
- 6 layers84.5 × 56 mm
VLF4 PCB
McMaster-Rocketry-Team/VLF4r2
PCB schematics and layout for Void Lake Fusion 4 Avionics
156 parts3 - 6 layers76.5 × 69 mm
- 2 layers63.2 × 23.8 mm
Wand
ayuusweetfish/Malletwand
A pendulum as a hands-on musical interface for all · NIME 2024 Short Paper
68 parts1CERN-OHL-S-2.0 - 2 layers25.4 × 25.4 mm
PiicoDev Magnetometer MMC5603
CoreElectronics/CE-PiicoDev-Magnetometer-MMC5603
This is the repo for the Core Electronics PiicoDev Magnetometer MMC5603.
24 parts1 - 2 layers41.2 × 10.5 mm
Questions
How big is the MAGNETOMETER PCB?
It measures 50 × 31 mm and has 2 copper layers, 1.6 mm thick.
What parts does the MAGNETOMETER use?
9 parts, built around the MMC5603NJ and M80-8770405. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the MAGNETOMETER KiCad files?
From the USSTRocketry/Pheonix-Hardware repository on GitHub, at the commit this page was made from: the board is MAGNETOMETER/MAGNETOMETER.kicad_pcb and its schematic Accelerometer/Accelerometer.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the MAGNETOMETER design in my own project?
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).