Skip to the content
2 layers50 × 31 mmFRAM, the printed circuit board in 3D
Size
50 × 31 mm
Copper layers
2
Thickness
1.6 mm
Parts
8
Nets
13
Pads
32
Tracks, vias
2, 0
Pours
1
Routed
Yes
KiCad
KiCad 7 (file 20221018)
Created
3 Feb 2024
Updated
14 Sep 2024

Overview

FRAM is an open-source printed circuit board by USSTRocketry, from the USSTRocketry/Pheonix-Hardware repository on GitHub, published under the MIT licence. It is a 2-layer board of 50 × 31 mm with 8 parts on 13 nets, routed with 2 tracks and 0 vias.

It is built around the MB85RC256VPF-G-JNERE2 and M80-8770405. Its parts include 2 resistors, 1 IC and 1 connector.

Main components

2

README

README.md

Pheonix-Hardware

Parts

8
QtyValueFootprintReferences
4MountingHole_PadMountingHole:MountingHole_3.2mm_M3_ISO7380_Pad_TopBottomH1, H2, H3, H4
2RResistor_SMD:R_0603_1608MetricR1, R2
1M80-8770405KiCad:M808770405J1
1MB85RC256VPF-G-JNERE2MB85RC256VPF-G-JNERE2:SOP127P797X210-8NIC1

More from USSTRocketry/Pheonix-Hardware

6
  • 2 layers50 × 31 mmAccelerometer, the printed circuit board in 3D

    Accelerometer

    USSTRocketry/Pheonix-Hardware

    9 partsMIT
  • 2 layers50 × 31 mmMAGNETOMETER, the printed circuit board in 3D

    MAGNETOMETER

    USSTRocketry/Pheonix-Hardware

    9 partsMIT
  • 2 layers50 × 31 mmBarometer, the printed circuit board in 3D

    Barometer

    USSTRocketry/Pheonix-Hardware

    8 partsMIT
  • 2 layers50 × 31 mmIMU BMI088, the printed circuit board in 3D

    IMU BMI088

    USSTRocketry/Pheonix-Hardware

    8 partsMIT
  • 2 layers50 × 31 mmRadio LoRa, the printed circuit board in 3D

    Radio LoRa

    USSTRocketry/Pheonix-Hardware

    8 partsMIT
  • 2 layersTeensy 4.1, the printed circuit board in 3D

    Teensy 4.1

    USSTRocketry/Pheonix-Hardware

    4 partsMIT

Similar boards

  • 4 layers368.2 × 159.8 mmChunky2040 rev3, the printed circuit board in 3D

    Chunky2040 rev3

    freznel10/Chunky2040_rev2

    draft

    736 parts39MIT
  • 2 layers20.5 × 24.8 mmPi interface, the printed circuit board in 3D

    Pi interface

    opulo-inc/lumenpnp

    The LumenPnP is an open source pick and place machine.

    8 parts3.7k
  • 2 layers59.9 × 25.7 mmBuffer, the printed circuit board in 3D

    Buffer

    hoglet67/RGBtoHDMI

    Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI

    8 parts1kGPL-3.0
  • 2 layers52 × 12.6 mmUSB, the printed circuit board in 3D

    USB

    shanteacontrols/OpenDeck

    A platform for building interactive control and sensing devices using MIDI and OSC built with Zephyr RTOS.

    8 parts960Apache-2.0
  • 2 layers87.5 × 48.5 mm7 input macropad, the printed circuit board in 3D

    7 input macropad

    hackclub/OnBoard

    💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

    8 parts915

Questions

How big is the FRAM PCB?

It measures 50 × 31 mm and has 2 copper layers, 1.6 mm thick.

What parts does the FRAM use?

8 parts, built around the MB85RC256VPF-G-JNERE2 and M80-8770405. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the FRAM KiCad files?

From the USSTRocketry/Pheonix-Hardware repository on GitHub, at the commit this page was made from: the board is FRAM/FRAM.kicad_pcb and its schematic Accelerometer/Accelerometer.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the FRAM design in my own project?

Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).