2 layers50 × 31 mm
2 layers50 × 31 mm
Accelerometer
USSTRocketry/Pheonix-Hardware- Size
- 50 × 31 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 9
- Nets
- 13
- Pads
- 38
- Tracks, vias
- 42, 3
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 7 (file 20221018)
- Created
- 3 Feb 2024
- Updated
- 14 Sep 2024
Overview
Accelerometer is an open-source printed circuit board by USSTRocketry, from the USSTRocketry/Pheonix-Hardware repository on GitHub, published under the MIT licence. It is a 2-layer board of 50 × 31 mm with 9 parts on 13 nets, routed with 42 tracks and 3 vias.
It is built around the KX134-1211 and M80-8770405. Its parts include 2 resistors, 1 capacitor, 1 IC and 1 connector. It belongs with the sensors and measurement boards of this library.
Main components
2README
README.mdPheonix-Hardware
Parts
9| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | MountingHole_Pad | MountingHole:MountingHole_3.2mm_M3_ISO7380_Pad_TopBottom | H1, H2, H3, H4 |
| 2 | 4.7k | Resistor_SMD:R_0402_1005Metric | R1, R2 |
| 1 | 0.1u | Capacitor_SMD:C_0402_1005Metric | C1 |
| 1 | KX134-1211 | XDCR_KX003-1077:XDCR_KX003-1077 | U1 |
| 1 | M80-8770405 | KiCad:M808770405 | J1 |
More from USSTRocketry/Pheonix-Hardware
6- 2 layers50 × 31 mm
- 2 layers50 × 31 mm
- 2 layers50 × 31 mm
- 2 layers50 × 31 mm
- 2 layers
Similar boards
- 4 layers60 × 100 mm
- 4 layers50.8 × 106.6 mm
- 4 layers184.3 × 25.4 mm
Standalone Avionics Board
MSTRocketDesignTeam/Avionics-Standalone-PCB
Standalone Avionics Board
136 partsGPL-3.0 - 4 layers50 × 100 mm
- 4 layers67.7 × 97.2 mm
- 4 layers50.8 × 87 mm
- 2 layers12.5 × 11 mm
Inskinacc
Aightech/e-skin
A bioinspired electronic skin system for robotic applications, combining FSR (force-sensing resistor) arrays and accelerometer arrays.
5 parts2GPL-3.0 - 2 layers103 × 30.5 mm
Questions
How big is the Accelerometer PCB?
It measures 50 × 31 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Accelerometer use?
9 parts, built around the KX134-1211 and M80-8770405. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Accelerometer KiCad files?
From the USSTRocketry/Pheonix-Hardware repository on GitHub, at the commit this page was made from: the board is Accelerometer/Accelerometer.kicad_pcb and its schematic Accelerometer/Accelerometer.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Accelerometer design in my own project?
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).