
Ark
tmtrcreations/The_Ark
PCB design files and configuration files for a Raspberry Pi CM3L based tablet.

The schematic will require some custom parts that can be found in our other repository RPiCM3Parts. The schematic contains everything required to get the CM3L to run.
PiCM3 GBA is an open-source printed circuit board by SethBarberee, from the SethBarberee/PiCM3_GBA repository on GitHub. It is a 4-layer board of 130.7 × 72.9 mm with 48 parts on 156 nets, routed with 106 tracks and 1 via.
It is built around the MCP73871EV and PAM2306AYPKE. Its parts include 20 resistors, 17 capacitors, 5 ICs, 2 diodes and 2 connectors.
PROJECT HAS BEEN UPDATED TO KICAD V5.0!
The schematic will require some custom parts that can be found in our other repository RPi_CM3_Parts. The schematic contains everything required to get the CM3L to run. The rest of the pins are free to be used for any project. These files are meant to help jumpstart a project that wants to build around the CM3L.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 7 | 100k | Resistor_SMD:R_0603_1608Metric | R1, R2, R3, R4, R5, R10, R12 |
| 5 | 47uF | Capacitor_SMD:C_1206_3216Metric | C6, C12, C14, C15, C16 |
| 4 | 10uF | Capacitor_SMD:C_0805_2012Metric | C4, C5, C8, C10 |
| 4 | 1k | Resistor_SMD:R_0603_1608Metric | R7, R8, R11, R13 |
| 4 | 200 | Resistor_SMD:R_0603_1608Metric | R16, R17, R18, R19 |
| 3 | 1uF | Capacitor_SMD:C_0603_1608Metric | C7, C11, C13 |
| 2 | 4.7uF | Capacitor_SMD:C_1206_3216Metric | C2, C9 |
| 2 | 4.7uF | Capacitor_SMD:C_0603_1608Metric | C3, C18 |
| 2 | 4.7uH | Pi-Library:SRN4018-4R7M | L1, L2 |
| 2 | LED | LED_SMD:LED_1206_3216Metric | D1, D2 |
| 1 | 100nF | Capacitor_SMD:C_0603_1608Metric | C1 |
| 1 | 1040310811 | Connector_Card:microSD_HC_Hirose_DM3D-SF | U4 |
| 1 | 10k | Resistor_SMD:R_0603_1608Metric | R14 |
| 1 | 175 | Resistor_SMD:R_0603_1608Metric | R20 |
| 1 | 1K | Resistor_SMD:R_0603_1608Metric | R21 |
| 1 | 20K | Resistor_SMD:R_0603_1608Metric | R15 |
| 1 | 270k | Resistor_SMD:R_0603_1608Metric | R9 |
| 1 | Conn_01x02_Shielded | Connector_JST:JST_XH_S2B-XH-A_1x02_P2.50mm_Horizontal | J1 |
| 1 | DDR2_SODIMM_CM_3_Lite | Pi-Library:Socket_SODIMM_DDR2 | U3 |
| 1 | MCP73871 | Package_DFN_QFN:QFN-20-1EP_4x4mm_P0.5mm_EP2.5x2.5mm | U2 |
| 1 | PAM2306AYPKE | Pi-Library:PAM2306AYPKE | U1 |
| 1 | USB_C_Plug_USB2.0 | Connector_USB:USB_C_Receptacle_HRO_TYPE-C-31-M-12 | P1 |
| 1 | ~ | Connector_FFC-FPC:TE_5-1734839-0_1x50-1MP_P0.5mm_Horizontal | U5 |

tmtrcreations/The_Ark
PCB design files and configuration files for a Raspberry Pi CM3L based tablet.

will127534/RPI5-SDexpress-Hat
ctrl-c "RPI5-CFE-Hat" ctrl-v "RPI5-SDexpress-Hat"

tmtrcreations/Pi-Compute-3-Lite-BLANK
Blank KiCad schematic for creating a project with the Pi CM3L.

marcbperez/pi-compute-device
A portable device built with the Raspberry Pi Compute module.

tmtrcreations/R2W_Pi_PGS
Open source handheld gaming device based on the Raspberry Pi CM3L


M2I-HABET/CyStack
This is the electronics stack and associated software for a module payload stack

CopperPilot/rpi-zero-2w-kicad
KiCad port of jonny12375/rp3a0: Raspberry Pi Zero 2W's RP3A0 on a Pi Pico-sized board
It measures 130.7 × 72.9 mm and has 4 copper layers, 1 mm thick.
48 parts, built around the MCP73871EV and PAM2306AYPKE. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the SethBarberee/PiCM3_GBA repository on GitHub, at the commit this page was made from: the board is PiCM3_GBA.kicad_pcb and its schematic Display.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask SethBarberee before reusing the design.