Skip to the content

Boards by PE1RGU

7 boards

Open-source boards designed in KiCad by PE1RGU on GitHub, from 1 repository. A board’s address here is its repository’s there.

  • 6 layers268 × 230 mmRf board, the printed circuit board in 3D

    Rf board

    PE1RGU/hf-antenna-switch

    Remote HF antenna switch: 3 radios x 4 antennas (path to 8), outdoor relay unit with a hardware safety chain, controlled over Cat6 from a shack interface. KiCad 10, open hardware, designed together with an AI.

    357 parts2CERN-OHL-S-2.0
  • 2 layers70 × 70 mm2x1 as, the printed circuit board in 3D

    2x1 as

    PE1RGU/hf-antenna-switch

    Remote HF antenna switch: 3 radios x 4 antennas (path to 8), outdoor relay unit with a hardware safety chain, controlled over Cat6 from a shack interface. KiCad 10, open hardware, designed together with an AI.

    16 parts2CERN-OHL-S-2.0
  • 6 layers340 × 126 mmBackplane, the printed circuit board in 3D

    Backplane

    PE1RGU/hf-antenna-switch

    Remote HF antenna switch: 3 radios x 4 antennas (path to 8), outdoor relay unit with a hardware safety chain, controlled over Cat6 from a shack interface. KiCad 10, open hardware, designed together with an AI.

    24 parts2CERN-OHL-S-2.0
  • 4 layers152 × 122.5 mmController board, the printed circuit board in 3D

    Controller board

    PE1RGU/hf-antenna-switch

    Remote HF antenna switch: 3 radios x 4 antennas (path to 8), outdoor relay unit with a hardware safety chain, controlled over Cat6 from a shack interface. KiCad 10, open hardware, designed together with an AI.

    93 parts2CERN-OHL-S-2.0
  • 4 layers60 × 107 mmRf iso backplane, the printed circuit board in 3D

    Rf iso backplane

    PE1RGU/hf-antenna-switch

    Remote HF antenna switch: 3 radios x 4 antennas (path to 8), outdoor relay unit with a hardware safety chain, controlled over Cat6 from a shack interface. KiCad 10, open hardware, designed together with an AI.

    4 parts2CERN-OHL-S-2.0
  • 4 layers100 × 50 mmRf iso card, the printed circuit board in 3D

    Rf iso card

    PE1RGU/hf-antenna-switch

    Remote HF antenna switch: 3 radios x 4 antennas (path to 8), outdoor relay unit with a hardware safety chain, controlled over Cat6 from a shack interface. KiCad 10, open hardware, designed together with an AI.

    4 parts2CERN-OHL-S-2.0
  • 4 layers159.6 × 161 mmShack interface, the printed circuit board in 3D

    Shack interface

    PE1RGU/hf-antenna-switch

    Remote HF antenna switch: 3 radios x 4 antennas (path to 8), outdoor relay unit with a hardware safety chain, controlled over Cat6 from a shack interface. KiCad 10, open hardware, designed together with an AI.

    290 parts2CERN-OHL-S-2.0