4 layers95 × 60 mm
4 layers95 × 60 mm
RubyLink revA
Misaka0x2730/RubyLink2Hardware platform for Miyako-Link based on RP2040
- Size
- 95 × 60 mm
- Copper layers
- 4
- Thickness
- 1.59 mm
- Parts
- 219
- Nets
- 194
- Pads
- 763
- Tracks, vias
- 1,835, 483
- Pours
- 25
- Routed
- Yes
- KiCad
- KiCad 5 (file 20210722)
- Created
- 11 Aug 2021
- Updated
- 9 Jan 2023
Overview
RubyLink revA is an open-source printed circuit board by Misaka0x2730, from the Misaka0x2730/RubyLink repository on GitHub. It is a 4-layer board of 95 × 60 mm with 219 parts on 194 nets, routed with 1,835 tracks and 483 vias.
It is built around the RP2040, NXE1S0505MC-R7 and TLV62568DBV, with the 74LVC2T45DC, 74HC595 and ISO7340CDW among its other parts. Its parts include 69 capacitors, 62 resistors, 20 ICs, 11 transistors and 8 diodes. It belongs with the RP2040 boards of this library.
Main components
10
RP2040
LQFN-56(7x7)12bit 133MHz 30 LQFN-56(7x7) Microcontrollers (MCU/MPU/SOC) ROHSRaspberry PiMicrocontrollers (MCU/MPU/SOC)
NXE1S0505MC-R7
--40℃~+85℃ 1 10.4mm 10uF 12.7mm 120kHz 1W 200mA 30mVp-p 3kV 4.5mm 5V 5V 67.5% Short Circuit Protection - Isolated Power Modules ROHSMurataIsolated Power Modules
TLV62568DBV
SOT-23-5-40℃~+125℃@(TJ) 1 1.5MHz 1A 2.5V~5.5V 35uA 600mV~5.5V Adjustable Buck Buck Built-in Yes SOT-23-5 DC-DC Converters ROHSTexas InstrumentsDC-DC Converters
74LVC2T45DC
VSSOP-8-0.5mm-40℃~+125℃ 1 1.2V~5.5V 1.2V~5.5V 2 420Mbps Bidirectional Power-Off Protection Tri-State VSSOP-8-0.5mm Translators, Level Shifters ROHSNexperiaTranslators, Level Shifters
74HC595
SOP-16-40℃~+85℃ 1 100ns@5V,50pF 10MHz 2V~6V 74HC 8 Serial-to-Serial or Parallel Tri-State SOP-16 Shift Registers ROHSGRShift Registers
ISO7340CDW
SOIC-16-300mil-40℃~+125℃ 0 25Mbps 3000 31ns 3V~5.5V 3V~5.5V 4 70kV/us Fail-safe output High Level、Low Level SOIC-16-300mil Digital Isolators ROHSTexas InstrumentsDigital IsolatorsISO7341CDW
SOIC-16-300mil-40℃~+125℃ 1 25Mbps 3 3000 31ns 3V~5.5V 3V~5.5V 70kV/us High Level SOIC-16-300mil Digital Isolators ROHSTexas InstrumentsDigital IsolatorsLP2985-33DBV
SOT-23-5-40℃~+125℃@(Tj) 1 150mA 16V 3.3V 30uVrms 45dB@(1kHz) 575mV@(150mA) 850uA Fixed Over Current Protection、Short Circuit Protection、Thermal shutdown、Enable control、Noise bypass terminal Positive SOT-23-5 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSTexas InstrumentsVoltage Regulators - Linear, Low Drop Out (LDO) Regulators
IRLML6402
SOT-23-55℃~+150℃ 1 P-Channel 1.3W 110pF 12nC 145pF 20V 3.7A 400mV 633pF 65mΩ@4.5V P-Channel SOT-23 MOSFETs ROHSGuangdong HottechMOSFETsIRLML2502
SOT-23-40℃~+150℃ 1 N-channel 1.25W 20V 4.2A 50mΩ@2.5V 600mV 66pF 740pF 8nC@10V SOT-23 MOSFETs ROHSGuangdong HottechMOSFETs
README
README.mdRubyLink
Hardware platform for Miyako-Link based on RP2040
Parts
219| Qty | Value | Footprint | References |
|---|---|---|---|
| 44 | 100n | Capacitor_SMD:C_0402_1005Metric | C11, C12, C13, C14, C15, C16, C18, C24, C25, C27, C28, C29, C30, C31, C32, C33 +28 |
| 12 | 33 | Resistor_SMD:R_0402_1005Metric | R35, R36, R37, R38, R42, R43, R50, R51, R52, R53, R59, R60 |
| 10 | 10k | Resistor_SMD:R_0402_1005Metric | R21, R22, R24, R28, R32, R39, R41, R49, R54, R56 |
| 9 | 1.5k | Resistor_SMD:R_0402_1005Metric | R25, R26, R27, R31, R33, R34, R44, R45, R46 |
| 9 | 100k | Resistor_SMD:R_0402_1005Metric | R29, R30, R40, R47, R48, R55, R57, R58, R62 |
| 8 | 10u | Capacitor_SMD:C_0603_1608Metric | C3, C10, C17, C63, C65, C66, C68, C69 |
| 8 | 74LVC2T45DC | Package_SO:VSSOP-8_2.3x2mm_P0.5mm | U8, U9, U10, U11, U16, U17, U18, U19 |
| 6 | IRLML6402 | Package_TO_SOT_SMD:SOT-23 | Q2, Q3, Q5, Q8, Q9, Q11 |
| 5 | IRLML2502 | Package_TO_SOT_SMD:SOT-23 | Q1, Q4, Q6, Q7, Q10 |
| 4 | 10n | Capacitor_SMD:C_0402_1005Metric | C4, C7, C9, C67 |
| 4 | 18p | Capacitor_SMD:C_0402_1005Metric | C19, C20, C21, C22 |
| 4 | 33 1% | Resistor_SMD:R_0603_1608Metric | R12, R13, R14, R15 |
| 4 | 49.9 1% | Resistor_SMD:R_0603_1608Metric | R7, R8, R9, R10 |
| 4 | GND | TestPoint:TestPoint_Pad_D1.0mm | TP3, TP7, TP16, TP25 |
| 4 | MountingHole_2.7mm_M2.5 | MountingHole:MountingHole_2.7mm_M2.5 | REF1, REF2, REF3, REF4 |
| 2 | 1k | Resistor_SMD:R_0402_1005Metric | R18, R23 |
| 2 | 1u | Capacitor_SMD:C_0402_1005Metric | C23, C26 |
| 2 | 27 | Resistor_SMD:R_0402_1005Metric | R19, R20 |
| 2 | 330 | Resistor_SMD:R_0402_1005Metric | R4, R5 |
| 2 | 4.7n/2kV | Capacitor_SMD:C_1812_4532Metric | C1, C2 |
| 2 | 4.7u | Capacitor_SMD:C_0603_1608Metric | C8, C62 |
| 2 | 5.1k | Resistor_SMD:R_0402_1005Metric | R2, R3 |
| 2 | 6.8nF | Capacitor_SMD:C_0402_1005Metric | C5, C6 |
| 2 | 74HC595 | Package_SO:SOIC-16_3.9x9.9mm_P1.27mm | U5, U6 |
| 2 | ACT | LED_SMD:LED_0603_1608Metric | D5, D8 |
| 2 | ERR | LED_SMD:LED_0603_1608Metric | D4, D7 |
| 2 | ISO7340C | Package_SO:SOIC-16W_7.5x10.3mm_P1.27mm | U13, U15 |
| 2 | SER | LED_SMD:LED_0603_1608Metric | D6, D9 |
| 2 | TL331 | Package_TO_SOT_SMD:SOT-23-5 | U12, U20 |
| 1 | 0 | Resistor_SMD:R_0402_1005Metric | R17 |
| 1 | 10 1% | Resistor_SMD:R_0603_1608Metric | R6 |
| 1 | 12.4k 1% | Resistor_SMD:R_0402_1005Metric | R11 |
| 1 | 120Ohm/100MHz | Inductor_SMD:L_0805_2012Metric | FB1 |
| 1 | 12MHz | Crystal:Crystal_SMD_3225-4Pin_3.2x2.5mm | Y2 |
| 1 | 1M | Resistor_SMD:R_0402_1005Metric | R16 |
| 1 | 1M | Resistor_SMD:R_1206_3216Metric | R1 |
| 1 | 2.2uH | Inductor_SMD:L_Taiyo-Yuden_NR-30xx | L1 |
| 1 | 24AA02-OT | Package_TO_SOT_SMD:SOT-23-5 | U4 |
| 1 | 25MHz | Crystal:Crystal_SMD_3225-4Pin_3.2x2.5mm | Y1 |
| 1 | 3V3 | TestPoint:TestPoint_Pad_D1.0mm | TP27 |
| 1 | 3V3_ISO | TestPoint:TestPoint_Pad_D1.0mm | TP30 |
| 1 | 450k | Resistor_SMD:R_0402_1005Metric | R61 |
| 1 | 5V | TestPoint:TestPoint_Pad_D1.0mm | TP26 |
| 1 | 5V_ISO | TestPoint:TestPoint_Pad_D1.0mm | TP29 |
| 1 | 6.8p | Capacitor_SMD:C_0402_1005Metric | C64 |
| 1 | ACT_LED | TestPoint:TestPoint_Pad_D1.0mm | TP2 |
| 1 | BOOT | TestPoint:TestPoint_Pad_D1.0mm | TP8 |
| 1 | BOOT | 1571563-9:SW_1571563-9 | SW2 |
| 1 | CORE_VCC | TestPoint:TestPoint_Pad_D1.0mm | TP6 |
| 1 | ETH | LED_SMD:LED_0603_1608Metric | D3 |
| 1 | ETHERNET | Connector_RJ:RJ45_Amphenol_RJMG1BD3B8K1ANR | J2 |
| 1 | ETH_PWR | TestPoint:TestPoint_Pad_D1.0mm | TP4 |
| 1 | GND_ISO | TestPoint:TestPoint_Pad_D1.0mm | TP28 |
| 1 | ISO7341C | Package_SO:SOIC-16W_7.5x10.3mm_P1.27mm | U14 |
| 1 | LED_ETH | TestPoint:TestPoint_Pad_D1.0mm | TP11 |
| 1 | LED_SYS | TestPoint:TestPoint_Pad_D1.0mm | TP9 |
| 1 | LED_USB | TestPoint:TestPoint_Pad_D1.0mm | TP10 |
| 1 | LINK_LED | TestPoint:TestPoint_Pad_D1.0mm | TP1 |
| 1 | LP2985-3.3 | Package_TO_SOT_SMD:SOT-23-5 | U23 |
| 1 | MCU SWD | Connector_IDC:IDC-Header_2x05_P2.54mm_Vertical | J3 |
| 1 | NXE1S0505MC | Converter_DCDC:Converter_DCDC_Murata_NXExSxxxxMC_SMD | U22 |
| 1 | RESET | 1571563-9:SW_1571563-9 | SW1 |
| 1 | RP2040 | RP2040_minimal:RP2040-QFN-56 | U3 |
| 1 | RST | TestPoint:TestPoint_Pad_D1.0mm | TP5 |
| 1 | SYS | LED_SMD:LED_0603_1608Metric | D1 |
| 1 | T1_LED_ACT | TestPoint:TestPoint_Pad_D1.0mm | TP15 |
| 1 | T1_LED_ERR | TestPoint:TestPoint_Pad_D1.0mm | TP14 |
| 1 | T1_LED_SER | TestPoint:TestPoint_Pad_D1.0mm | TP17 |
| 1 | T2_LED_ACT | TestPoint:TestPoint_Pad_D1.0mm | TP20 |
| 1 | T2_LED_ERR | TestPoint:TestPoint_Pad_D1.0mm | TP19 |
| 1 | T2_LED_SER | TestPoint:TestPoint_Pad_D1.0mm | TP21 |
| 1 | TARGET1 | Connector_IDC:IDC-Header_2x10_P2.54mm_Horizontal | J4 |
| 1 | TARGET1_PWR_EN | TestPoint:TestPoint_Pad_D1.0mm | TP18 |
| 1 | TARGET1_VREF_PWR_EN | TestPoint:TestPoint_Pad_D1.0mm | TP12 |
| 1 | TARGET1_VREF_PWR_GATE | TestPoint:TestPoint_Pad_D1.0mm | TP13 |
| 1 | TARGET2 | Connector_IDC:IDC-Header_2x10_P2.54mm_Horizontal | J5 |
| 1 | TARGET2_ISO_PWR_EN | TestPoint:TestPoint_Pad_D1.0mm | TP24 |
| 1 | TARGET2_ISO_VREF_PWR_EN | TestPoint:TestPoint_Pad_D1.0mm | TP22 |
| 1 | TARGET2_VREF_PWR_GATE | TestPoint:TestPoint_Pad_D1.0mm | TP23 |
| 1 | TLV62568DBV | Package_TO_SOT_SMD:SOT-23-5 | U21 |
The 214 most common of 219 parts.
More from Misaka0x2730/RubyLink
1Similar boards
- 2 layers87.3 × 53.3 mm
- 4 layers53 × 42 mm
MioLink
Misaka0x2730/MioLink
ARM JTAG/SWD debugger (BlackMagic port) based on RP2040.
117 parts30GPL-3.0 - 4 layers60 × 28 mm
- 4 layers95 × 113 mm
- 4 layers66 × 37 mm
- 2 layers100 × 50 mm
Can iso
karimf1/J939-transceiver
This project is an isolated CAN/J1939 transceiver breakout on a 2-layer board. It includes a DE-9 or terminal block and termination jumper.
41 partsMIT - 4 layers160 × 100 mm
Mastertemp esp32
ryanbjohnson/PentairMasterTempESP32
This folder is the KiCad project area for the MasterTemp 125 ESP32 interface board.
95 partsMIT - 2 layers68.5 × 34.3 mm
Questions
How big is the RubyLink revA PCB?
It measures 95 × 60 mm and has 4 copper layers, 1.59 mm thick.
What parts does the RubyLink revA use?
219 parts, built around the RP2040, NXE1S0505MC-R7, TLV62568DBV and 74LVC2T45DC. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the RubyLink revA KiCad files?
From the Misaka0x2730/RubyLink repository on GitHub, at the commit this page was made from: the board is revA/RubyLink_revA.kicad_pcb and its schematic revA/Input_interfaces.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the RubyLink revA design in my own project?
Its repository states no licence, so its author keeps all rights: ask Misaka0x2730 before reusing the design.