

RubyLink revB
Hardware platform for Miyako-Link based on RP2040
- Size
- 95 × 60 mm
- Copper layers
- 4
- Thickness
- 1.59 mm
- Parts
- 219
- Nets
- 190
- Pads
- 755
- Tracks, vias
- 1,917, 501
- Pours
- 27
- Routed
- Yes
- KiCad
- KiCad 6 (file 20211014)
- Created
- 11 Aug 2021
- Updated
- 9 Jan 2023
Overview
RubyLink revB is an open-source printed circuit board by Misaka0x2730, from the Misaka0x2730/RubyLink repository on GitHub. It is a 4-layer board of 95 × 60 mm with 219 parts on 190 nets, routed with 1,917 tracks and 501 vias.
It is built around the RP2040, CRE1S0505SC and TLV62568DBV, with the 74LVC2T45DC, 74HC595 and ISO7340CDW among its other parts. Its parts include 69 capacitors, 61 resistors, 20 ICs, 11 transistors and 8 diodes. It belongs with the RP2040 boards of this library.
Main components
10RP2040
LQFN-56(7x7)12bit 133MHz 30 LQFN-56(7x7) Microcontrollers (MCU/MPU/SOC) ROHSRaspberry PiMicrocontrollers (MCU/MPU/SOC)CRE1S0505SC
SIP-4SIP-4 DC-DC Power Modules ROHSMurataDC-DC Power ModulesTLV62568DBV
SOT-23-5-40℃~+125℃@(TJ) 1 1.5MHz 1A 2.5V~5.5V 35uA 600mV~5.5V Adjustable Buck Buck Built-in Yes SOT-23-5 DC-DC Converters ROHSTexas InstrumentsDC-DC Converters74LVC2T45DC
VSSOP-8-0.5mm-40℃~+125℃ 1 1.2V~5.5V 1.2V~5.5V 2 420Mbps Bidirectional Power-Off Protection Tri-State VSSOP-8-0.5mm Translators, Level Shifters ROHSNexperiaTranslators, Level Shifters74HC595
SOP-16-40℃~+85℃ 1 100ns@5V,50pF 10MHz 2V~6V 74HC 8 Serial-to-Serial or Parallel Tri-State SOP-16 Shift Registers ROHSGRShift RegistersISO7340CDW
SOIC-16-300mil-40℃~+125℃ 0 25Mbps 3000 31ns 3V~5.5V 3V~5.5V 4 70kV/us Fail-safe output High Level、Low Level SOIC-16-300mil Digital Isolators ROHSTexas InstrumentsDigital IsolatorsISO7341CDW
SOIC-16-300mil-40℃~+125℃ 1 25Mbps 3 3000 31ns 3V~5.5V 3V~5.5V 70kV/us High Level SOIC-16-300mil Digital Isolators ROHSTexas InstrumentsDigital IsolatorsLP2985-33DBV
SOT-23-5-40℃~+125℃@(Tj) 1 150mA 16V 3.3V 30uVrms 45dB@(1kHz) 575mV@(150mA) 850uA Fixed Over Current Protection、Short Circuit Protection、Thermal shutdown、Enable control、Noise bypass terminal Positive SOT-23-5 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSTexas InstrumentsVoltage Regulators - Linear, Low Drop Out (LDO) RegulatorsIRLML6402
SOT-23-55℃~+150℃ 1 P-Channel 1.3W 110pF 12nC 145pF 20V 3.7A 400mV 633pF 65mΩ@4.5V P-Channel SOT-23 MOSFETs ROHSGuangdong HottechMOSFETsIRLML2502
SOT-23-40℃~+150℃ 1 N-channel 1.25W 20V 4.2A 50mΩ@2.5V 600mV 66pF 740pF 8nC@10V SOT-23 MOSFETs ROHSGuangdong HottechMOSFETs
README
README.mdRubyLink
Hardware platform for Miyako-Link based on RP2040
Parts
219| Qty | Value | Footprint | References |
|---|---|---|---|
| 44 | 100n | Capacitor_SMD:C_0402_1005Metric | C11, C12, C13, C14, C15, C16, C18, C24, C25, C27, C28, C29, C30, C31, C32, C33 +28 |
| 12 | 33 | Resistor_SMD:R_0402_1005Metric | R34, R35, R36, R37, R41, R42, R49, R50, R51, R52, R58, R59 |
| 11 | 10k | Resistor_SMD:R_0402_1005Metric | R19, R20, R21, R23, R27, R31, R38, R40, R48, R53, R55 |
| 9 | 1.5k | Resistor_SMD:R_0402_1005Metric | R24, R25, R26, R30, R32, R33, R43, R44, R45 |
| 9 | 100k | Resistor_SMD:R_0402_1005Metric | R28, R29, R39, R46, R47, R54, R56, R57, R61 |
| 8 | 10u | Capacitor_SMD:C_0603_1608Metric | C3, C10, C17, C63, C65, C66, C68, C69 |
| 8 | 74LVC2T45DC | Package_SO:VSSOP-8_2.3x2mm_P0.5mm | U8, U9, U10, U11, U16, U17, U18, U19 |
| 6 | IRLML6402 | Package_TO_SOT_SMD:SOT-23 | Q2, Q3, Q5, Q8, Q9, Q11 |
| 5 | IRLML2502 | Package_TO_SOT_SMD:SOT-23 | Q1, Q4, Q6, Q7, Q10 |
| 4 | 10n | Capacitor_SMD:C_0402_1005Metric | C4, C7, C9, C67 |
| 4 | 18p | Capacitor_SMD:C_0402_1005Metric | C19, C20, C21, C22 |
| 4 | 33 1% | Resistor_SMD:R_0603_1608Metric | R10, R11, R12, R13 |
| 4 | 49.9 1% | Resistor_SMD:R_0603_1608Metric | R5, R6, R7, R8 |
| 4 | GND | TestPoint:TestPoint_Pad_D1.0mm | TP3, TP7, TP16, TP25 |
| 4 | MountingHole_2.7mm_M2.5 | MountingHole:MountingHole_2.7mm_M2.5 | REF1, REF2, REF3, REF4 |
| 2 | 1k | Resistor_SMD:R_0402_1005Metric | R16, R22 |
| 2 | 1u | Capacitor_SMD:C_0402_1005Metric | C23, C26 |
| 2 | 27 | Resistor_SMD:R_0402_1005Metric | R17, R18 |
| 2 | 330 | Resistor_SMD:R_0402_1005Metric | R2, R3 |
| 2 | 4.7n/2kV | Capacitor_SMD:C_1812_4532Metric | C1, C2 |
| 2 | 4.7u | Capacitor_SMD:C_0603_1608Metric | C8, C62 |
| 2 | 6.8nF | Capacitor_SMD:C_0402_1005Metric | C5, C6 |
| 2 | 74HC595 | Package_SO:SOIC-16_3.9x9.9mm_P1.27mm | U5, U6 |
| 2 | ACT | LED_THT:LED_D3.0mm | D5, D8 |
| 2 | ERR | LED_THT:LED_D3.0mm | D4, D7 |
| 2 | ISO7340C | Package_SO:SOIC-16W_7.5x10.3mm_P1.27mm | U13, U15 |
| 2 | SER | LED_THT:LED_D3.0mm | D6, D9 |
| 2 | TL331 | Package_TO_SOT_SMD:SOT-23-5 | U12, U20 |
| 1 | 0 | Resistor_SMD:R_0402_1005Metric | R15 |
| 1 | 10 1% | Resistor_SMD:R_0603_1608Metric | R4 |
| 1 | 12.4k 1% | Resistor_SMD:R_0402_1005Metric | R9 |
| 1 | 120Ohm/100MHz | Inductor_SMD:L_0805_2012Metric | FB1 |
| 1 | 12MHz | Crystal:Crystal_SMD_3225-4Pin_3.2x2.5mm | Y2 |
| 1 | 1M | Resistor_SMD:R_0402_1005Metric | R14 |
| 1 | 1M | Resistor_SMD:R_1206_3216Metric | R1 |
| 1 | 2.2uH | Inductor_SMD:L_Taiyo-Yuden_NR-30xx | L1 |
| 1 | 24AA02-OT | Package_TO_SOT_SMD:SOT-23-5 | U4 |
| 1 | 25MHz | Crystal:Crystal_SMD_3225-4Pin_3.2x2.5mm | Y1 |
| 1 | 3V3 | TestPoint:TestPoint_Pad_D1.0mm | TP27 |
| 1 | 3V3_ISO | TestPoint:TestPoint_Pad_D1.0mm | TP30 |
| 1 | 450k | Resistor_SMD:R_0402_1005Metric | R60 |
| 1 | 5V | TestPoint:TestPoint_Pad_D1.0mm | TP26 |
| 1 | 5V_ISO | TestPoint:TestPoint_Pad_D1.0mm | TP29 |
| 1 | 6.8p | Capacitor_SMD:C_0402_1005Metric | C64 |
| 1 | ACT_LED | TestPoint:TestPoint_Pad_D1.0mm | TP2 |
| 1 | BOOT | 1571563-9:SW_1571563-9 | SW2 |
| 1 | BOOT | TestPoint:TestPoint_Pad_D1.0mm | TP8 |
| 1 | CORE_VCC | TestPoint:TestPoint_Pad_D1.0mm | TP6 |
| 1 | CRE1S0505SC | Converter_DCDC:Converter_DCDC_Murata_CRE1xxxxxxSC_THT | U22 |
| 1 | ETH | LED_THT:LED_D3.0mm | D3 |
| 1 | ETHERNET | Connector_RJ:RJ45_Amphenol_RJMG1BD3B8K1ANR | J2 |
| 1 | ETH_PWR | TestPoint:TestPoint_Pad_D1.0mm | TP4 |
| 1 | GND_ISO | TestPoint:TestPoint_Pad_D1.0mm | TP28 |
| 1 | ISO7341C | Package_SO:SOIC-16W_7.5x10.3mm_P1.27mm | U14 |
| 1 | LED_ETH | TestPoint:TestPoint_Pad_D1.0mm | TP11 |
| 1 | LED_SYS | TestPoint:TestPoint_Pad_D1.0mm | TP9 |
| 1 | LED_USB | TestPoint:TestPoint_Pad_D1.0mm | TP10 |
| 1 | LINK_LED | TestPoint:TestPoint_Pad_D1.0mm | TP1 |
| 1 | LP2985-3.3 | Package_TO_SOT_SMD:SOT-23-5 | U23 |
| 1 | MCU SWD | Connector_IDC:IDC-Header_2x05_P2.54mm_Vertical | J3 |
| 1 | MCU SWD TC | Connector:Tag-Connect_TC2030-IDC-FP_2x03_P1.27mm_Vertical | J4 |
| 1 | RESET | 1571563-9:SW_1571563-9 | SW1 |
| 1 | RP2040 | RP2040_minimal:RP2040-QFN-56 | U3 |
| 1 | RST | TestPoint:TestPoint_Pad_D1.0mm | TP5 |
| 1 | SYS | LED_THT:LED_D3.0mm | D1 |
| 1 | T1_LED_ACT | TestPoint:TestPoint_Pad_D1.0mm | TP15 |
| 1 | T1_LED_ERR | TestPoint:TestPoint_Pad_D1.0mm | TP14 |
| 1 | T1_LED_SER | TestPoint:TestPoint_Pad_D1.0mm | TP17 |
| 1 | T2_LED_ACT | TestPoint:TestPoint_Pad_D1.0mm | TP20 |
| 1 | T2_LED_ERR | TestPoint:TestPoint_Pad_D1.0mm | TP19 |
| 1 | T2_LED_SER | TestPoint:TestPoint_Pad_D1.0mm | TP21 |
| 1 | TARGET1 | Connector_IDC:IDC-Header_2x10_P2.54mm_Horizontal | J5 |
| 1 | TARGET1_PWR_EN | TestPoint:TestPoint_Pad_D1.0mm | TP18 |
| 1 | TARGET1_VREF_PWR_EN | TestPoint:TestPoint_Pad_D1.0mm | TP12 |
| 1 | TARGET1_VREF_PWR_GATE | TestPoint:TestPoint_Pad_D1.0mm | TP13 |
| 1 | TARGET2 | Connector_IDC:IDC-Header_2x10_P2.54mm_Horizontal | J6 |
| 1 | TARGET2_ISO_PWR_EN | TestPoint:TestPoint_Pad_D1.0mm | TP24 |
| 1 | TARGET2_ISO_VREF_PWR_EN | TestPoint:TestPoint_Pad_D1.0mm | TP22 |
| 1 | TARGET2_VREF_PWR_GATE | TestPoint:TestPoint_Pad_D1.0mm | TP23 |
| 1 | TLV62568DBV | Package_TO_SOT_SMD:SOT-23-5 | U21 |
The 214 most common of 219 parts.
More from Misaka0x2730/RubyLink
1- 4 layers95 × 60 mm

Similar boards
- 4 layers60 × 28 mm

- 2 layers87.3 × 53.3 mm

- 4 layers53 × 42 mm

MioLink
Misaka0x2730/MioLink
ARM JTAG/SWD debugger (BlackMagic port) based on RP2040.
117 parts30GPL-3.0 - 4 layers95 × 113 mm

- 4 layers66 × 37 mm

- 4 layers94.3 × 81.8 mm

YukaLink revA
Misaka0x2730/YukaLink
Dual targets USB+ETH ARM JTAG/SWD debugger (BlackMagic port) based on RP2350. JTAG and SWD interfaces are implemented on PIO.
321 parts3GPL-3.0 - 2 layers70 × 150 mm

- 2 layers92.5 × 82.8 mm

Rifle and sensors
DAlexis/caustic-lasertag-system
Caustic project is a full-featured indoor and outdoor lasertag system
268 parts16
Questions
How big is the RubyLink revB PCB?
It measures 95 × 60 mm and has 4 copper layers, 1.59 mm thick.
What parts does the RubyLink revB use?
219 parts, built around the RP2040, CRE1S0505SC, TLV62568DBV and 74LVC2T45DC. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the RubyLink revB KiCad files?
From the Misaka0x2730/RubyLink repository on GitHub, at the commit this page was made from: the board is revB/RubyLink_revB.kicad_pcb and its schematic revA/Input_interfaces.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the RubyLink revB design in my own project?
Its repository states no licence, so its author keeps all rights: ask Misaka0x2730 before reusing the design.