
R2-Backplane
Manuvr/Digitabulum-Hardware
KiCAD source files for Manuvr's motion capture glove.

KiCAD source files for Manuvr's motion capture glove.
Compute WROOM32 is an open-source printed circuit board by Manuvr, from the Manuvr/Digitabulum-Hardware repository on GitHub. It is a 4-layer board of 24.8 × 31.7 mm with 17 parts on 54 nets, routed with 353 tracks and 51 vias.
It is built around the FT231XS-R. Its parts include 5 capacitors, 3 ICs and 1 connector. It belongs with the ESP32 boards of this library.
This is a backplane PCB for Digitabulum. When combined with the PowerPlant, it has the same schematic as the r2-Backplane.
This board is intended as a testing harness for functional subunits designed for use with the Digitabulum sensor package. This would be the board you would want for prototyping new CPLD designs, power supplies, or compute modules.
If you do not want to do those things, but just want a working glove, you should use the r2-Backplane instead.
The CPLD GPIO pin has been routed to the 2v5/3v3 selection signal.
| Front | Back |
|---|---|
![]() | ![]() |
| Qty | Value | Footprint | References |
|---|---|---|---|
| 2 | 0.1uF | Capacitors_SMD:C_0402_NoSilk | C5, C6 |
| 2 | 100nF | r2Parts:CapArray_CKCL44 | CARY1, CARY3 |
| 2 | 15k | r2Parts:RES_4_EXBN8V | RP1, RP2 |
| 2 | MountingHole_2.2mm_M2_DIN965 | Mounting_Holes:MountingHole_2.2mm_M2_DIN965 | mh0, mh1 |
| 1 | 100uF | Capacitors_SMD:C_0805 | C2 |
| 1 | 10nF | Capacitors_SMD:C_0402_NoSilk | C1 |
| 1 | 22pF | r2Parts:CapArray_CKCL44 | CARY4 |
| 1 | 4.7uF | Capacitors_SMD:C_0402_NoSilk | C3 |
| 1 | ASTMLP | r2Parts:ASTMLPD | U3 |
| 1 | ESP32-WROOM_U | ESP32-footprints-Lib:ESP32-WROOM-U | U1 |
| 1 | FT231XS | r2Parts:LFCSP_WQ20 | U2 |
| 1 | HiRose-02X15 | r2Parts:DF12(4.0)-30DS-0.5V(86) | P1 |
| 1 | QA_NPN | TO_SOT_Packages_SMD:TSOT-23-6_MK06A_HandSoldering | QA_NPN1 |

Manuvr/Digitabulum-Hardware
KiCAD source files for Manuvr's motion capture glove.

Manuvr/Digitabulum-Hardware
KiCAD source files for Manuvr's motion capture glove.

Manuvr/Digitabulum-Hardware
KiCAD source files for Manuvr's motion capture glove.

Manuvr/Digitabulum-Hardware
KiCAD source files for Manuvr's motion capture glove.

Manuvr/Digitabulum-Hardware
KiCAD source files for Manuvr's motion capture glove.


Manuvr/Digitabulum-Hardware
KiCAD source files for Manuvr's motion capture glove.

sudomesh/disaster-radio
A (paused) work-in-progress long-range, low-bandwidth wireless disaster recovery mesh network powered by the sun.

shorepine/tulipcc
The Tulip Creative Computer and AMYboard - portable Python synthesizers




vaugerbird/sstv-backpack
A ESP32-CAM SSTV backpack for the Baofeng UV-5R + others!


hirakuni45/RL78
Renesas RL78 Microcontroller, C++ framework, Library, Sample
It measures 24.8 × 31.7 mm and has 4 copper layers, 1.6 mm thick.
17 parts, built around the FT231XS-R. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the Manuvr/Digitabulum-Hardware repository on GitHub, at the commit this page was made from: the board is Compute-WROOM32/Compute-WROOM32.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask Manuvr before reusing the design.