Skip to the content
4 layers24.8 × 27.2 mmCompute Template, the printed circuit board in 3D

KiCAD source files for Manuvr's motion capture glove.

Size
24.8 × 27.2 mm
Copper layers
4
Thickness
1.6 mm
Parts
9
Nets
24
Pads
78
Tracks, vias
211, 17
Pours
6
Routed
Yes
KiCad
KiCad 4
Created
17 Jun 2017
Updated
10 Feb 2019

Overview

Compute Template is an open-source printed circuit board by Manuvr, from the Manuvr/Digitabulum-Hardware repository on GitHub. It is a 4-layer board of 24.8 × 27.2 mm with 9 parts on 24 nets, routed with 211 tracks and 17 vias.

Its parts include 4 connectors and 1 capacitor. It belongs with the FPGA and CPLD boards of this library.

README

r2-Dev-Backplane/README.md

r2-Dev-Backplane

This is a backplane PCB for Digitabulum. When combined with the PowerPlant, it has the same schematic as the r2-Backplane.

Intended usage

This board is intended as a testing harness for functional subunits designed for use with the Digitabulum sensor package. This would be the board you would want for prototyping new CPLD designs, power supplies, or compute modules.

If you do not want to do those things, but just want a working glove, you should use the r2-Backplane instead.

The CPLD GPIO pin has been routed to the 2v5/3v3 selection signal.

Features

  • ESD protection diodes for ingress-resistant USB port.
  • Supports full software management of battery.
  • Supports reduced-voltage operation and full power down of the sensor package for maximum battery longevity.
  • JTAG breakout for in-circuit programming of CPLD.

FrontBack
FrontBack

Order from OSH Park

Parts

9
QtyValueFootprintReferences
2100nFr2Parts:CapArray_CKCL44CARY1, CARY2
2MountingHole_2.2mm_M2_DIN965Mounting_Holes:MountingHole_2.2mm_M2_DIN965mh0, mh1
1BackPlanePin_Headers:Pin_Header_Straight_2x06_Pitch2.54mmP3
1CONN_01X01manuvr_logo:ManuvrLogoP4
1CPLDPin_Headers:Pin_Header_Straight_2x06_Pitch2.54mmP2
1HiRose-02X15r2Parts:DF12(4.0)-30DS-0.5V(86)P1
1IANS_CAP_POLARIZEDCapacitors_SMD:C_0805C2

More from Manuvr/Digitabulum-Hardware

7
  • 4 layers24.8 × 67.1 mmR2-Backplane, the printed circuit board in 3D

    R2-Backplane

    Manuvr/Digitabulum-Hardware

    KiCAD source files for Manuvr's motion capture glove.

    47 parts4
  • 4 layers77.9 × 67.1 mmR2-Dev Backplane, the printed circuit board in 3D

    R2-Dev Backplane

    Manuvr/Digitabulum-Hardware

    KiCAD source files for Manuvr's motion capture glove.

    38 parts4
  • 4 layers22.5 × 37.7 mmPowerPlant Module, the printed circuit board in 3D

    PowerPlant Module

    Manuvr/Digitabulum-Hardware

    KiCAD source files for Manuvr's motion capture glove.

    35 parts4
  • 4 layers20.9 × 44.7 mmIRQ TestHarness, the printed circuit board in 3D

    IRQ TestHarness

    Manuvr/Digitabulum-Hardware

    KiCAD source files for Manuvr's motion capture glove.

    22 parts4
  • 4 layers24.8 × 31.7 mmCompute WROOM32, the printed circuit board in 3D

    Compute WROOM32

    Manuvr/Digitabulum-Hardware

    KiCAD source files for Manuvr's motion capture glove.

    17 parts4
  • 4 layers24.8 × 33.1 mmR2-Adapter, the printed circuit board in 3D

    R2-Adapter

    Manuvr/Digitabulum-Hardware

    KiCAD source files for Manuvr's motion capture glove.

    7 parts4
  • 4 layers14.9 × 37.7 mmLevelShifter, the printed circuit board in 3D

    LevelShifter

    Manuvr/Digitabulum-Hardware

    KiCAD source files for Manuvr's motion capture glove.

    7 parts4

Similar boards

  • 4 layers39.3 × 61.8 mmMCL64, the printed circuit board in 3D

    MCL64

    MicroCoreLabs/Projects

    Ted Fried's MicroCore Labs Projects - FPGA CPU cores and emulators for the 8088, 8086, 8051, 6502, 68000, Z80, Risc-V, and also Typewriter and EPROM Emulator projects.

    9 parts534
  • 4 layers79.2 × 26.3 mmHPE FlexibleLOM adapter x4, the printed circuit board in 3D

    HPE FlexibleLOM adapter x4

    TobleMiner/HPE-FlexibleLOM-adapter

    Adapter for using HPE FlexibleLOM cards in full height PCIe slots

    9 parts246GPL-3.0
  • 4 layers74 × 42 mmCoupler isolation, the printed circuit board in 3D

    Coupler isolation

    azonenberg/starshipraider

    Open hardware test equipment

    9 parts193BSD-3-Clause
  • 4 layersErOled096 1 1, the printed circuit board in 3D

    ErOled096 1 1

    BerkeleyHCI/PolymorphicBlocks

    A Python-based hardware description language for PCBs for higher-level (block-diagram / system-architecture level) PCB design through libraries of directly reusable subcircuit generators.

    9 parts94BSD-3-Clause
  • 4 layers108 × 31.8 mmSimm72 rom plcc, the printed circuit board in 3D

    Simm72 rom plcc

    agranlund/raven

    Homemade MC68060 + DSP56303 Atari-compatible computer. Hardware, firmware, and software stack

    9 parts87
  • 4 layers36.3 × 21.1 mmBoard main xiao, the printed circuit board in 3D

    Board main xiao

    m-kozlowski/airbridge

    Wireless adapter for AirSense/AirCurve 10 devices

    9 parts26GPL-3.0
  • 4 layers151.9 × 99.8 mmNqvme template, the printed circuit board in 3D

    Nqvme template

    thorpej/pg68k

    The 68k Playground, a 680x0-based home-brew computer with multiple CPU options

    9 parts15
  • 4 layers27 × 56 mmReceiver, the printed circuit board in 3D

    Receiver

    will127534/CSI-2-FourLane-HDMI-Extender

    A simple MIPI CSI-2 extender with 4-lane support through HDMI cable

    9 parts15MIT

Questions

How big is the Compute Template PCB?

It measures 24.8 × 27.2 mm and has 4 copper layers, 1.6 mm thick.

What parts does the Compute Template use?

9 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Compute Template KiCad files?

From the Manuvr/Digitabulum-Hardware repository on GitHub, at the commit this page was made from: the board is Compute-Template/Compute-Template.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.

Can I use the Compute Template design in my own project?

Its repository states no licence, so its author keeps all rights: ask Manuvr before reusing the design.