4 layers24.8 × 67.1 mm
R2-Backplane
Manuvr/Digitabulum-Hardware
KiCAD source files for Manuvr's motion capture glove.
47 parts4
4 layers22.5 × 37.7 mm
PowerPlant Module
Manuvr/Digitabulum-Hardware4KiCAD source files for Manuvr's motion capture glove.
- Size
- 22.5 × 37.7 mm
- Copper layers
- 4
- Thickness
- 1.6 mm
- Parts
- 35
- Nets
- 29
- Pads
- 152
- Tracks, vias
- 322, 54
- Pours
- 23
- Routed
- Yes
- KiCad
- KiCad 4
- Created
- 17 Jun 2017
- Updated
- 10 Feb 2019
Overview
PowerPlant Module is an open-source printed circuit board by Manuvr, from the Manuvr/Digitabulum-Hardware repository on GitHub. It is a 4-layer board of 22.5 × 37.7 mm with 35 parts on 29 nets, routed with 322 tracks and 54 vias.
It is built around the BQ24155RGY. Its parts include 13 capacitors, 5 resistors, 5 connectors, 4 ICs and 3 inductors.
Main components
1README
r2-Dev-Backplane/README.mdr2-Dev-Backplane
This is a backplane PCB for Digitabulum. When combined with the PowerPlant, it has the same schematic as the r2-Backplane.
Intended usage
This board is intended as a testing harness for functional subunits designed for use with the Digitabulum sensor package. This would be the board you would want for prototyping new CPLD designs, power supplies, or compute modules.
If you do not want to do those things, but just want a working glove, you should use the r2-Backplane instead.
The CPLD GPIO pin has been routed to the 2v5/3v3 selection signal.
Features
- ESD protection diodes for ingress-resistant USB port.
- Supports full software management of battery.
- Supports reduced-voltage operation and full power down of the sensor package for maximum battery longevity.
- JTAG breakout for in-circuit programming of CPLD.
| Front | Back |
|---|---|
 |  |
Parts
35| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | 1k | Resistors_SMD:R_0402_NoSilk | R1, R2, R5, R6 |
| 3 | 100nF | r2Parts:CapArray_CKCL44 | CARY1, CARY2, CARY3 |
| 3 | 1uF | Capacitors_SMD:C_0402_NoSilk | C1, C3, C7 |
| 2 | 100uF | Capacitors_SMD:C_0805_HandSoldering | C6, C13 |
| 2 | 10uF | Capacitors_SMD:C_0805 | C5, C10 |
| 2 | 2.2uH | iansModules:L-SMD | L1, L2 |
| 2 | 22uF | Capacitors_SMD:C_0805 | C4, C11 |
| 1 | 0.1uF | Capacitors_SMD:C_0402_NoSilk | C12 |
| 1 | 10nF | Capacitors_SMD:C_0402_NoSilk | C8 |
| 1 | 10uF | Capacitors_SMD:C_0402_NoSilk | C9 |
| 1 | 1uH | Inductors_NEOSID:Neosid_Inductor_SM-NE29_SMD1008 | L3 |
| 1 | 4.7uF | Capacitors_SMD:C_0805 | C2 |
| 1 | 68mOhm | Resistors_SMD:R_2512 | R4 |
| 1 | BQ24155 | r2Parts:BQ24155 | U6 |
| 1 | CONN_01X02 | Pin_Headers:Pin_Header_Straight_1x02_Pitch2.54mm | P2 |
| 1 | CTRL | Pin_Headers:Pin_Header_Straight_1x05_Pitch2.54mm | P4 |
| 1 | F_Small | Resistors_SMD:R_0603_HandSoldering | F1 |
| 1 | HV_IO | Pin_Headers:Pin_Header_Straight_1x04_Pitch2.54mm | P6 |
| 1 | LSF0204x | r2Parts:R-PUQFN-N12 | U4 |
| 1 | LTC2942-1 | r2Parts:DFN-6-1EP_2x3mm_Pitch0.5mm | U5 |
| 1 | LV_IO | Pin_Headers:Pin_Header_Straight_1x04_Pitch2.54mm | P5 |
| 1 | PWR | Pin_Headers:Pin_Header_Straight_1x08_Pitch2.54mm | P3 |
| 1 | QA_NPN | TO_SOT_Packages_SMD:SOT-363_SC-70-6_Handsoldering | QA_NPN1 |
| 1 | SC283 | r2Parts:MLPQ-W18 (2mmx3mm) | U7 |
More from Manuvr/Digitabulum-Hardware
7- 4 layers77.9 × 67.1 mm
R2-Dev Backplane
Manuvr/Digitabulum-Hardware
KiCAD source files for Manuvr's motion capture glove.
38 parts4 - 4 layers20.9 × 44.7 mm
IRQ TestHarness
Manuvr/Digitabulum-Hardware
KiCAD source files for Manuvr's motion capture glove.
22 parts4 - 4 layers24.8 × 31.7 mm
Compute WROOM32
Manuvr/Digitabulum-Hardware
KiCAD source files for Manuvr's motion capture glove.
17 parts4 - 4 layers24.8 × 27.2 mm
Compute Template
Manuvr/Digitabulum-Hardware
KiCAD source files for Manuvr's motion capture glove.
9 parts4 - 4 layers24.8 × 33.1 mm
- 4 layers14.9 × 37.7 mm
LevelShifter
Manuvr/Digitabulum-Hardware
KiCAD source files for Manuvr's motion capture glove.
7 parts4
Similar boards
- 4 layers25.9 × 63.9 mm
Easyduino ESP32S3
Hanqaqa/Easyduino
Easily dive into different PCB KiCad designs of the most popular microcontroller devboards
35 parts755CERN-OHL-P-2.0 - 4 layers36.8 × 78.6 mm
- 4 layers35.6 × 17.8 mm
- 4 layers89 × 93 mm
- 4 layers50 × 60 mm
PiCCANTE OBD Dongle
Alia5/PiCCANTE
PiCCANTE is a powerful tool for exploring and reversing CAN busses of vehicles, based on Raspberry Pi Pico (any model)
35 parts104GPL-3.0 - 4 layers28.9 × 28.9 mm
- 4 layers30.5 × 68.6 mm
- 4 layers17.5 × 35 mm
KungFuSID
Sgw32/KungFuSID
Kung Fu SID is a firmware based on Kung Fu Flash which allows SID emulation
35 parts65
Questions
How big is the PowerPlant Module PCB?
It measures 22.5 × 37.7 mm and has 4 copper layers, 1.6 mm thick.
What parts does the PowerPlant Module use?
35 parts, built around the BQ24155RGY. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the PowerPlant Module KiCad files?
From the Manuvr/Digitabulum-Hardware repository on GitHub, at the commit this page was made from: the board is PowerPlant-Module/PowerPlant-Module.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the PowerPlant Module design in my own project?
Its repository states no licence, so its author keeps all rights: ask Manuvr before reusing the design.