
BSPD ManchesterStingerMotorsports
ManchesterStingerMotorsports/BSPD
The diagram below shows how the bspd would work (NOT the actual schematic)
Open-source boards designed in KiCad by ManchesterStingerMotorsports on GitHub, from 9 repositories. A board’s address here is its repository’s there.

ManchesterStingerMotorsports/BSPD
The diagram below shows how the bspd would work (NOT the actual schematic)

ManchesterStingerMotorsports/johnson-node
Fully modular CAN node hardware and firmware libraries

ManchesterStingerMotorsports/apps-pcb
PCB used with APPS (Piher-Amphenol PSC-360) to invert the signal output


ManchesterStingerMotorsports/EV_Rear_SDC
Second half of Shutdown circuit logic and logging for states on the Johnson node that will sit at the back of the EV and act as a hat to the johnson node in addition to an IMU


ManchesterStingerMotorsports/IC-SDC-Hub
New shutdown Circuit Hub for the IC car.

ManchesterStingerMotorsports/IMD_Carrier
Reset board for the imd that will sit below it in the TSAC

ManchesterStingerMotorsports/Precharge
Circuit used to prepare the vehicle side of the TS for the full accumulator voltage.

ManchesterStingerMotorsports/johnson-node
Fully modular CAN node hardware and firmware libraries

ManchesterStingerMotorsports/johnson-node
Fully modular CAN node hardware and firmware libraries

ManchesterStingerMotorsports/johnson-node
Fully modular CAN node hardware and firmware libraries

ManchesterStingerMotorsports/johnson-node
Fully modular CAN node hardware and firmware libraries



ManchesterStingerMotorsports/EV_Rear_SDC
Second half of Shutdown circuit logic and logging for states on the Johnson node that will sit at the back of the EV and act as a hat to the johnson node in addition to an IMU


ManchesterStingerMotorsports/IC-SDC-Hub
New shutdown Circuit Hub for the IC car.

ManchesterStingerMotorsports/IC-SDC-Hub
New shutdown Circuit Hub for the IC car.