
Controller
google/mozc-devices
Circuit diagrams and firmware source code for Gboard DIY keyboards

Circuit used to prepare the vehicle side of the TS for the full accumulator voltage.
Precharge is an open-source printed circuit board by ManchesterStingerMotorsports, from the ManchesterStingerMotorsports/Precharge repository on GitHub. It is a 2-layer board of 58 × 38 mm with 11 parts on 8 nets, routed with 34 tracks and 396 vias.
It is built around the DAR71205U. Its parts include 4 resistors, 2 connectors, 1 diode and 1 switch.
Circuit used to prepare the vehicle side of the TS for the full accumulator voltage.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 2 | 5K | Library:TO-263-2 | R1, R3 |
| 2 | 5K | Package_TO_SOT_SMD:TO-263-2 | R2, R4 |
| 2 | LOGO | Custom_MSM:Decorative_Hazard | G***, G*** |
| 1 | 1.7V | Diode_SMD:D_SOD-123F | D1 |
| 1 | DAR71205 | Library:Relay_HV | K1 |
| 1 | JST-XA | Custom_MSM:Connector_JST-XA_2POS | J2 |
| 1 | MicroFit+ | Custom_MSM:Connector_MicroFit-Plus_4POS | J1 |
The 10 most common of 11 parts.

google/mozc-devices
Circuit diagrams and firmware source code for Gboard DIY keyboards


FrameworkComputer/ExpansionCards
Reference designs and documentation to create Expansion Cards for the Framework Laptop

hoglet67/RGBtoHDMI
Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI

hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!


tardate/LittleArduinoProjects
a collection of "Little Electronic & Arduino Projects", most involving electronics or an Arduino in one way or another!

basilfx/TRADFRI-Hacking
Hacking IKEA TRÅDFRI products, such as light bulbs, window blinds and other accessories.
It measures 58 × 38 mm and has 2 copper layers, 1.6 mm thick.
11 parts, built around the DAR71205U. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the ManchesterStingerMotorsports/Precharge repository on GitHub, at the commit this page was made from: the board is Precharge.kicad_pcb and its schematic Precharge.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask ManchesterStingerMotorsports before reusing the design.