Skip to the content

Boards by MadsRudolph

32 boards

Open-source boards designed in KiCad by MadsRudolph on GitHub, from 5 repositories. A board’s address here is its repository’s there.

  • 2 layers100 × 100 mmAd3-test rig, the printed circuit board in 3D

    Ad3-test rig

    MadsRudolph/ad3-test-rig

    CNC-friendly Analog Discovery 3 test rig with a plug-in experiment board, printable enclosure and assembly guide

    13 parts
  • 2 layers190.5 × 104 mmClassd.autoplaced.refined.routed, the printed circuit board in 3D

    Classd.autoplaced.refined.routed

    MadsRudolph/personal-projects

    One passive crossover board per speaker, so build two. Single-sided, through-hole only, CNC isolation-milled with an 0.8 mm end mill (the DTU 62768 process).

    61 parts
  • 2 layers63 × 60.8 mmEsp32node wip, the printed circuit board in 3D

    Esp32node wip

    MadsRudolph/personal-projects

    One passive crossover board per speaker, so build two. Single-sided, through-hole only, CNC isolation-milled with an 0.8 mm end mill (the DTU 62768 process).

    32 parts
  • 2 layers54 × 45.8 mmEsp32solder.placed, the printed circuit board in 3D

    Esp32solder.placed

    MadsRudolph/personal-projects

    One passive crossover board per speaker, so build two. Single-sided, through-hole only, CNC isolation-milled with an 0.8 mm end mill (the DTU 62768 process).

    17 parts
  • 2 layers148 × 100 mmIlluminate7mk2-crossover, the printed circuit board in 3D

    Illuminate7mk2-crossover

    MadsRudolph/personal-projects

    One passive crossover board per speaker, so build two. Single-sided, through-hole only, CNC isolation-milled with an 0.8 mm end mill (the DTU 62768 process).

    27 parts
  • 2 layers147 × 99 mmMonitor boost, the printed circuit board in 3D

    Monitor boost

    MadsRudolph/personal-projects

    One passive crossover board per speaker, so build two. Single-sided, through-hole only, CNC isolation-milled with an 0.8 mm end mill (the DTU 62768 process).

    47 parts
  • 2 layers53.4 × 40.5 mmRode preamp, the printed circuit board in 3D

    Rode preamp

    MadsRudolph/personal-projects

    One passive crossover board per speaker, so build two. Single-sided, through-hole only, CNC isolation-milled with an 0.8 mm end mill (the DTU 62768 process).

    20 parts
  • 2 layers101 × 104 mmSubxo, the printed circuit board in 3D

    Subxo

    MadsRudolph/personal-projects

    One passive crossover board per speaker, so build two. Single-sided, through-hole only, CNC isolation-milled with an 0.8 mm end mill (the DTU 62768 process).

    44 parts