Skip to the content
2 layersPS2BaseMount NanoPi, the printed circuit board in 3D

PS2BaseMount NanoPi

MRKane05/PS2BaseMount

The KiCad project for the base mount for the "Junkstation" PS2 portable project

Copper layers
2
Thickness
1.6 mm
Parts
58
Nets
219
Pads
357
Tracks, vias
0, 0
Routed
Not yet
KiCad
KiCad 5 (file 20171130)
Created
11 Dec 2024
Updated
11 Dec 2024

Overview

PS2BaseMount NanoPi is an open-source printed circuit board by MRKane05, from the MRKane05/PS2BaseMount repository on GitHub. It is a 2-layer board with 58 parts on 219 nets.

It is built around the RJ45. Its parts include 9 ICs, 7 connectors, 3 resistors, 3 inductors and 1 capacitor. It belongs with the AVR (ATmega, ATtiny) and PIC boards of this library.

Main components

1

README

README.md

This is a dump of the KiCad project for the Junkstation PS2 project I made a few years ago. I'm really just backing it up for prosperity. I'm taking no responsibility for this and it really should be used only as reference.

It's worth noting that there are a couple of mistakes on the board that I haven't fixed: -The Ethernet wiring for the Mango isn't correct, and troubleshooting it was exceedingly difficult, so much so that I didn't write it down when I got it right, I just put the lid on it -The Ethernet lines for the Mango shouldn't be pulled down to Ground but pulled to the "R0" pin on the Mango. This allows a successful ethernet connection -The SD Card slot wired up for game loading through the memory card port is correctly wired

Parts

58
QtyValueFootprintReferences
2PS2_ControlMountPS2BaseMount:PS2_BoardMountFootprintP2, P3
1100KResistor_SMD:R_0805_2012Metric_Pad1.15x1.40mm_HandSolderR1
110uFCapacitor_SMD:C_0805_2012Metric_Pad1.15x1.40mm_HandSolderC1
11KResistor_SMD:R_0805_2012Metric_Pad1.15x1.40mm_HandSolderR2
11N58XXDiode_SMD:D_0805_2012Metric_Pad1.15x1.40mm_HandSolderD1
12N7000Package_TO_SOT_THT:TO-92_InlineQ1
13.3VTestPoint:TestPoint_Pad_2.0x2.0mmTP14
15VBuckBoostPS2BaseMount:PS2BuckBoostU7
18.5VTestPoint:TestPoint_Pad_2.0x2.0mmTP3
1ACKTestPoint:TestPoint_Pad_2.0x2.0mmTP16
1Arduino_Nano_v3.xModule:Arduino_Nano_WithMountingHolesA1
1AudioAmpPS2BaseMount:PAM8803_AudioAmpU5
1Audio_LeftConnector_JST:JST_ZE_SM02B-ZESS-TBT_1x02-1MP_P1.50mm_HorizontalU3
1Audio_RightConnector_JST:JST_ZE_SM02B-ZESS-TBT_1x02-1MP_P1.50mm_HorizontalU4
1CIRTestPoint:TestPoint_Pad_2.0x2.0mmTP11
1CSTestPoint:TestPoint_Pad_2.0x2.0mmTP15
1Conn_01x06_FemaleConnector_PinHeader_2.54mm:PinHeader_1x06_P2.54mm_HorizontalJ2
1DDOWNTestPoint:TestPoint_Pad_2.0x2.0mmTP12
1DMosfet_AO9926BPS2BaseMount:DualMosfet AO9926BU6
1GNDTestPoint:TestPoint_Pad_2.0x2.0mmTP13
1MTR+TestPoint:TestPoint_Pad_2.0x2.0mmTP2
1MTR-TestPoint:TestPoint_Pad_2.0x2.0mmTP1
1NanoPiDUO2NanoPI_Duo2-master:NanoPIDUO2U1
1PIC16F18876-I_PTPS2BaseMount:PIC16F18876-I_PTU8
1PJ30240PS2BaseMount:AudioJack_PJ30240U2
1PS2AVPortPS2BaseMount:PS2_AVPort_CompleteM2
1PS2AVPort_SideMountPS2BaseMount:PS2_AVPort_Complete_MountSilkM1
1PS2_MemCardMountPS2BaseMount:PS2_MemCardMountPointsP1
1R1TestPoint:TestPoint_Pad_2.0x2.0mmTP4
1R2TestPoint:TestPoint_Pad_2.0x2.0mmTP5
1RJ45Connector_RJ:RJ45_Amphenol_54602-x08_HorizontalJ1
1SLTestPoint:TestPoint_Pad_2.0x2.0mmTP6
1SQTestPoint:TestPoint_Pad_2.0x2.0mmTP8
1STTestPoint:TestPoint_Pad_2.0x2.0mmTP7
1TP10TestPoint:TestPoint_Pad_2.0x2.0mmL2
1TP11TestPoint:TestPoint_Pad_2.0x2.0mmRX1
1TP12TestPoint:TestPoint_Pad_2.0x2.0mmMISO1
1TP13TestPoint:TestPoint_Pad_2.0x2.0mmMOSI1
1TP18TestPoint:TestPoint_Pad_2.0x2.0mmR3
1TP19TestPoint:TestPoint_Pad_2.0x2.0mmCLK1
1TP20TestPoint:TestPoint_Pad_2.0x2.0mmL3
1TP23TestPoint:TestPoint_Pad_2.0x2.0mmLY1
1TP26TestPoint:TestPoint_Pad_2.0x2.0mmLX1
1TP27TestPoint:TestPoint_Pad_2.0x2.0mmDUP1
1TP4TestPoint:TestPoint_Pad_2.0x2.0mmRY1
1TP5TestPoint:TestPoint_Pad_2.0x2.0mmGND1
1TP6TestPoint:TestPoint_Pad_2.0x2.0mm3.3V1
1TP7TestPoint:TestPoint_Pad_2.0x2.0mmDLEFT1
1TP8TestPoint:TestPoint_Pad_2.0x2.0mmDRIGHT1
1TP9TestPoint:TestPoint_Pad_2.0x2.0mmL1
1TRITestPoint:TestPoint_Pad_2.0x2.0mmTP9
1TS_LFTConnector_JST:JST_GH_SM05B-GHS-TB_1x05-1MP_P1.25mm_HorizontalM3
1TS_RHTConnector_JST:JST_GH_SM05B-GHS-TB_1x05-1MP_P1.25mm_HorizontalM4
1USB_A_DualConnector_USB:USB_A_Wuerth_61400826021_Horizontal_StackedJ4
1USB_BPS2BaseMount:USB_A_Custom_ThroughholeJ3
1XTestPoint:TestPoint_Pad_2.0x2.0mmTP10
1XOST_ButtonsPS2BaseMount:XOST_ButtonsU9

More from MRKane05/PS2BaseMount

3
  • 2 layers273 × 146 mmPS2BaseMount, the printed circuit board in 3D

    PS2BaseMount

    MRKane05/PS2BaseMount

    The KiCad project for the base mount for the "Junkstation" PS2 portable project

    98 parts
  • 2 layersPS2Board PreController, the printed circuit board in 3D

    PS2Board PreController

    MRKane05/PS2BaseMount

    The KiCad project for the base mount for the "Junkstation" PS2 portable project

    26 parts
  • 2 layersPreControlChip, the printed circuit board in 3D

    PreControlChip

    MRKane05/PS2BaseMount

    The KiCad project for the base mount for the "Junkstation" PS2 portable project

    19 parts

Similar boards

  • 2 layers33.7 × 97.8 mmHAN ESP TSS721, the printed circuit board in 3D

    HAN ESP TSS721

    UtilitechAS/amsreader-firmware

    ESP8266 and ESP32 compatible firmware to read, interpret and publish data to MQTT from smart electrical meters, both DLMS and DSMR is supported

    29 parts470
  • 4 layers84 × 82 mmToad, the printed circuit board in 3D

    Toad

    travisgoodspeed/goodfet

    An embedded bus adapter for various microcontrollers and radios.

    241 parts333
  • 2 layers100 × 100 mmCANBuster, the printed circuit board in 3D

    CANBuster

    GBert/misc

    miscellaneous stuff / unsorted

    182 parts99
  • 2 layers50 × 55.4 mmCasserole, the printed circuit board in 3D

    Casserole

    puddly/casserole

    Control GE appliances

    23 parts94Apache-2.0
  • 2 layers67.9 × 47.8 mmPlatine, the printed circuit board in 3D

    Platine

    nv1t/standing-desk-interceptor

    I wanted to intercept the communication between my Flexispot standing desk buttons. This is the progress on the project

    11 parts52CC0-1.0
  • 4 layers90 × 75 mmCM4 2 Backup, the printed circuit board in 3D

    CM4 2 Backup

    olvint/CM4-NAS-MiniPCIE

    Raspberry Pi CM4 based NAS solution board

    21 parts51
  • 4 layers73.9 × 84.5 mmAei, the printed circuit board in 3D

    Aei

    Severson-Group/AMDC-Hardware

    Circuit board designs for controlling advanced motor systems

    54 parts51
  • 2 layers99 × 60 mmPwr, the printed circuit board in 3D

    Pwr

    mfkiwl/KiwiSDR_PCB

    KiCAD PCB files for KiwiSDR project including active antenna and bias tee

    64 parts46

Questions

What parts does the PS2BaseMount NanoPi use?

58 parts, built around the RJ45. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the PS2BaseMount NanoPi KiCad files?

From the MRKane05/PS2BaseMount repository on GitHub, at the commit this page was made from: the board is PS2BaseMount_NanoPi.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.

Can I use the PS2BaseMount NanoPi design in my own project?

Its repository states no licence, so its author keeps all rights: ask MRKane05 before reusing the design.