

Cópia
- Size
- 48 × 55 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 31
- Nets
- 170
- Pads
- 384
- Tracks, vias
- 7, 0
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 7 (file 20221018)
- Created
- 14 Jun 2025
- Updated
- 14 Jun 2025
Overview
Cópia is an open-source printed circuit board by LucasGomesLG, from the LucasGomesLG/TCC repository on GitHub. It is a 2-layer board of 48 × 55 mm with 31 parts on 170 nets, routed with 7 tracks and 0 vias.
It is built around the DW01, RT9742GGJ5 and RT9742SNGV, with the TP4056, FS8205A and PRK22J5DBBNN among its other parts. Its parts include 10 resistors, 6 capacitors, 5 connectors, 4 ICs and 2 diodes. It belongs with the Raspberry Pi (Linux) boards of this library.
Main components
7DW01
SOT-23-6-40℃~+85℃ 1 1.5V~8V 2.4V 4.3V 4uA Lithium Battery Not supported Overcharge protection、Over-discharge protection、Overcurrent Protection、Short-Circuit Protection Protection IC Support SOT-23-6 Battery Management ROHSGuangdong HottechBattery ManagementRT9742GGJ5
TSOT-23-5-40℃~+85℃ 1 1A 2.7V~6V 70mΩ Active High High Side Switch Short-Circuit Protection(SCP)、Undervoltage Protection(UVP)、Overcurrent Protection(OCP)、Over Temperature Protection TSOT-23-5 Power Distribution Switches ROHSRichtek TechPower Distribution SwitchesRT9742SNGV
SOT-23-3-40℃~+85℃ 1 2.7V~6V 500mA 70mΩ Active High High Side Switch Short-Circuit Protection(SCP)、Undervoltage Protection(UVP)、Overcurrent Protection(OCP)、Over Temperature Protection SOT-23-3 Power Distribution Switches ROHSRichtek TechPower Distribution SwitchesTP4056
ESOP-8-40℃~+85℃ 1 1A 35uA 4.2V 4V~6.5V Charging IC Lithium Battery Support Support 恒流充电、恒压充电、涓流充电、自动再充电、充电终止、可编程充电电流、软启动、欠压锁定 ESOP-8 Battery Management ROHSUMWBattery ManagementFS8205A
SOT-23-6-55℃~+150℃ 1.2V 1.5W 2 N-Channel 20V 31.5mΩ@2.5V 466pF 5.7nC@4.5V 58pF 65pF 6A SOT-23-6 MOSFETs ROHSTECH PUBLICMOSFETsPRK22J5DBBNN
--20℃~+65℃ 125V Black SPST - Rocker Switches ROHSZF Friedrichshafen AGRocker SwitchesSMBJ5.0A
DO-214AA(SMB)-65℃~+150℃ 5V 600W@10/1000us 65.3A@10/1000us 7V 800uA 9.2V TVS Unidirectional DO-214AA(SMB) ESD and Surge Protection (TVS/ESD) ROHSMDDESD And Surge Protection (TVS/ESD)
README
README.mdRepositório do projeto Amarelo
Parts
31| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | 100nF | Capacitor_SMD:C_0201_0603Metric | C1, C2, C4, C5 |
| 2 | 10uF | Capacitor_SMD:C_0201_0603Metric | C3, C6 |
| 2 | 1k | Resistor_SMD:R_0201_0603Metric | R8, R10 |
| 2 | 5.1K | Resistor_SMD:R_0201_0603Metric_Pad0.64x0.40mm_HandSolder | R4, R5 |
| 2 | nf | Resistor_SMD:R_0201_0603Metric_Pad0.64x0.40mm_HandSolder | R1, R2 |
| 1 | 1.2k | Resistor_SMD:R_0201_0603Metric | R6 |
| 1 | 100ohm | Resistor_SMD:R_0201_0603Metric | R7 |
| 1 | 12K 1% | Resistor_SMD:R_0402_1005Metric | R3 |
| 1 | 1k | Resistor_SMD:R_0201_0603Metric_Pad0.64x0.40mm_HandSolder | R9 |
| 1 | B2B-XH-A_LF__SN_ | B2B-XH-A_LF__SN_:B2B-XH-A_LF__SN_ | J2 |
| 1 | ComputeModule4-CM4 | CM4IO:Raspberry-Pi-4-Compute-Module | Module1 |
| 1 | Conn_01x22_Female | Connector_FFC-FPC:Hirose_FH12-22S-0.5SH_1x22-1MP_P0.50mm_Horizontal | J3 |
| 1 | DW01 | DW01:SOT95P280X135-6N | IC1 |
| 1 | FS8205A | FS8205A:SOP65P640X120-8N | Q2 |
| 1 | HDMI_D_1.4 | Connector_HDMI:HDMI_Micro-D_Molex_46765-0x01 | J6 |
| 1 | LED_A | LED_SMD:LED_0201_0603Metric | D2 |
| 1 | LED_V | LED_SMD:LED_0201_0603Metric | D1 |
| 1 | Micro_SD_Card_Det2 | Connector_Card:microSD_HC_Hirose_DM3BT-DSF-PEJS | J4 |
| 1 | PRK22J5DBBNN | SW_PRK22J5DBBNN_ZFE:SW_PRK22J5DBBNN_ZFE | SW1 |
| 1 | RT9742GGJ5 | Package_TO_SOT_SMD:SOT-23-5 | U2 |
| 1 | RT9742SNGV | footprints:SOT_42SNGV_RIT | U1 |
| 1 | SMBJ5.0A | SMBJ5.0A:DO-214AASMB_J-BEND_LTF | CR1 |
| 1 | TP4056 | TP4056:SOP8-PP_TPW | U3 |
| 1 | USB_C_Receptacle_PowerOnly_6P | Connector_USB:USB_C_Receptacle_GCT_USB4125-xx-x-0190_6P_TopMnt_Horizontal | J1 |
Similar boards
- 2 layers

- 2 layers84 × 98 mm

Joule Chief
fishPointer/Joule-Thief
I teach myself new skills by designing projects that require to develop the skills I want in order to complete them.
93 parts25MIT - 2 layers32 × 32 mm

- 2 layers159 × 140.1 mm

Phazor
skrmsh/skirmish-hardware
Skirmish Hardware © 2022-2023 by Ole Lange is licensed under CC BY-NC-SA 4.0. To view a copy of this license, visit http://creativecommons.org/licenses/by-nc-sa/4.0/
123 parts10 - 2 layers80 × 25 mm

- 2 layers80 × 50 mm

- 4 layers322.5 × 183.5 mm

Dancing forest
sequoia-hope/dancing-forest-pcb
The PCB design for the Dancing Forest art project
239 parts1 - 4 layers

Questions
How big is the Cópia PCB?
It measures 48 × 55 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Cópia use?
31 parts, built around the DW01, RT9742GGJ5, RT9742SNGV and TP4056. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Cópia KiCad files?
From the LucasGomesLG/TCC repository on GitHub, at the commit this page was made from: the board is cópia/cópia.kicad_pcb and its schematic AXP288/AXP288.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Cópia design in my own project?
Its repository states no licence, so its author keeps all rights: ask LucasGomesLG before reusing the design.