Skip to the content
123

RT9742SNGV

Richtek TechExtended

-40℃~+85℃ 1 2.7V~6V 500mA 70mΩ Active High High Side Switch Short-Circuit Protection(SCP)、Undervoltage Protection(UVP)、Overcurrent Protection(OCP)、Over Temperature Protection SOT-23-3 Power Distribution Switches ROHS

Part id
richtek-tech/RT9742SNGV
Category
Power Distribution Switches
Package
SOT-23-3
Pins
3
In stock
4,622 at JLCPCB (C3235509)
Used on
36 open-source boards

Overview

The RT9742SNGV is a power Distribution Switche made by Richtek Tech in a SOT-23-3 package with 3 pins. -40℃~+85℃ 1 2.7V~6V 500mA 70mΩ Active High High Side Switch Short-Circuit Protection(SCP)、Undervoltage Protection(UVP)、Overcurrent Protection(OCP)、Over Temperature Protection SOT-23-3 Power Distribution Switches ROHS.

PCBKit's library has its KiCad symbol (Power_Management:RT9742SNGV, from KiCad's library) and its footprint (Package_TO_SOT_SMD:SOT-23-3, from KiCad's library), ready for a KiCad board. 4,622 are in stock at JLCPCB (part C3235509). 36 open-source boards in 29 repositories on GitHub use it.

Symbol

1VIN2VOUT3GND
Power_Management:RT9742SNGVFrom KiCad's library

Footprint

123
Package_TO_SOT_SMD:SOT-23-3From KiCad's library

From the datasheet

10
Supply, least
2.7 V · VIN, recommended operating min · p. 5
Supply, most
6 V · VIN, recommended operating max · p. 5
Supply, absolute maximum
7 V · VIN, absolute maximum · p. 5
Works from
-40 °C · Ambient temperature, recommended operating min · p. 5
Works up to
85 °C · Ambient temperature, recommended operating max · p. 5
Junction, hottest
150 °C · Junction temperature, absolute maximum · p. 5
Takes working
30 µA · VIN quiescent current, switch on, VOUT open, typical · p. 5
Takes asleep
100 nA · Input shutdown current, VIN = 5V, no load, device off, typical · p. 5
Current limit
700 mA · RT9742S current limit, VOUT = 1V, typical · p. 6
Junction to air (SOT-23-3)
243.3 K/W · Junction to ambient, four-layer JEDEC 51-7 test board · p. 5

What it is and has

6
Switch
Single N-MOSFET high-side power switch for USB applications · p. 1
Protection
Reverse blocking current · p. 1
Protection
Over current protection · p. 1
Protection
Short circuit protection · p. 1
Approval
UL Approved−E219878 · p. 1
Approval
Nemko Approved-NO109777 · p. 1

Specifications

33
ParameterConditionsAs printedPage
Supply Input Voltage VINmax 7 V5
EN Voltage ENmin -0.3 · max 7 V5
FLAG Voltage FLAGmax 7 V5
Power Dissipation PDSOT-23-3; TA = 25°Cmax 0.41 W5
Package Thermal Resistance θJASOT-23-3; Note 2typ 243.3 °C/W5
Junction Temperaturemax 150 °C5
Lead TemperatureSoldering, 10 sec.max 260 °C5
Storage Temperature Rangemin -65 · max 150 °C5
HBM (Human Body Model)ESD Susceptibility; Note 3max 2 kV5
Supply Input Voltage VINmin 2.7 · max 6 V5
EN Voltage ENmin 0 · max 6 V5
Junction Temperature Rangemin -40 · max 125 °C5
Ambient Temperature Rangemin -40 · max 85 °C5
Input Quiescent Current IQVIN = 5V, CIN = 10uF, COUT = 0.1uF, TA = 25°C; Switch on, VOUT = opentyp 30 · max 40 A5
Input Shutdown Current ISHDNVIN = 5V, CIN = 10uF, COUT = 0.1uF, TA = 25°C; no load on OUT, device OFF, VEN = 0V or VEN = 5Vtyp 0.1 · max 1 A5
Over Current Trip Threshold (Note 5) ITRIPRT9742S (RT9742Q/R/S row); VIN = 5V, 100A/s; CIN = 10uF, COUT = 0.1uF, TA = 25°Cmin 0.65 · typ 0.89 · max 1 A5
Current Limit ILIMRT9742S (RT9742Q/R/S row); VOUT = 1V; VIN = 5V, CIN = 10uF, COUT = 0.1uF, TA = 25°Cmin 0.6 · typ 0.7 · max 0.8 A6
EN/EN Threshold Logic_High Voltage VIHVIN = 2.7V to 6Vmin 1.5 V6
EN/EN Threshold Logic_Low Voltage VILVIN = 2.7V to 6Vmax 0.75 V6
EN/EN Input Current IEN/ENVEN = 0V, VEN = 5Vmin -0.5 · max 0.5 A6
Output Leakage Current ILEAKAGEVEN = 0V, RLOAD = 0typ 0.5 · max 1 A6
Reverse Leakage Current IREVVOUT = 5V, VIN = 0Vmax 1 A6
Reverse Voltage Trip Point VREVVOUT  VINtyp 200 mV6
Output Turn-On Rise Time tON_RISE10% to 90% of VOUT risingtyp 1.5 ms6
Turn-On Time tONFrom enable to 90% of VOUTtyp 2.1 ms6
FLG Output Resistance RFLGISINK = 1mAtyp 10 6
FLG Off Current IFLG_OFFVFLG = 5Vtyp 0.01 · max 1 A6
FLG Delay Time tDFrom fault condition to FLG assertiontyp 10 ms6
Shutdown Auto-Discharge Resistance RDischargeVEN = 0V, VEN = 5Vtyp 100 6
Under-Voltage Lockout VUVLOVIN risingmax 2.4 V6
Under-Voltage Hysteresis VUVLOVIN decreasingtyp 0.1 V6
Thermal Shutdown Protection TSDNote 6; Guarantee by designtyp 140 °C6
Thermal Shutdown Hysteresis TSDNote 6; Guarantee by designtyp 20 °C6

Pins, by the datasheet

3
1 VIN
Power source connection to the internal circuitry and MOSFET drain. · p. 1
2 VOUT
Switched output from the MOSFET source to the load. · p. 1
3 GND
Ground. · p. 1

Open-source boards using it

36See all 36
  • 4 layers170 × 170 mmCM5IO, the printed circuit board in 3D

    CM5IO

    sanctuary-systems-com/rpi-cm5io-mini-itx

    A mini ITX board with PCIe x16 based on the Raspberry Pi Comput Module 5 IO board

    75 parts29CERN-OHL-P-2.0
  • 6 layers125 × 125 mmLibreboard broken, the printed circuit board in 3D

    Libreboard broken

    256foundation/libreboard

    Open Source Bitcoin Mining Control Board

    193 parts21CERN-OHL-S-2.0
  • 6 layers131.5 × 132.4 mmBedCooler, the printed circuit board in 3D

    BedCooler

    NicholasKorth/BedCooler

    A dual-zone heating and cooling controller for a bed: a 6-layer KiCad board with an STM32G474 real-time controller and a Raspberry Pi Compute Module 5 host.

    258 parts11
  • 4 layers80 × 70 mmCM4IOv5, the printed circuit board in 3D

    CM4IOv5

    vega-d/CM4-nano-carrierboard

    A simplified carrier board for RPI CM4 module featuring reduced footprint.

    66 parts11GPL-3.0
  • 4 layers157.5 × 130 mmJv thesis, the printed circuit board in 3D

    Jv thesis

    JhonVelasquez/Embedded_system_Synchronize_Plant

    Project of a embedded system that synchronizes signals in a plant. There is electronic (PCB) and software design (FreeRTOS for STM32F7).

    233 parts2
  • 6 layers47 × 105 mmCompactPi, the printed circuit board in 3D

    CompactPi

    loganrf/compactPi

    compactPi is a project to develop a compact Raspberry Pi Compute Module carrier suitable for ArduPilot applications. It's primarily targeted at marine applications (ArduSub/ArduRover).

    127 parts2CERN-OHL-S-2.0
  • 4 layers128 × 128 mmSF 01 Compute Board, the printed circuit board in 3D

    SF 01 Compute Board

    sandgum/Triangulate-SF_01-Speaker-Frame

    A 24 inch Raspberry Pi-based Android digital picture frame attached to a 220W stereo Bluetooth speaker with DSP

    369 parts2
  • 4 layers80 × 80 mmTravel router, the printed circuit board in 3D

    Travel router

    0x62b/travel-router

    CM5 travel router carrier board with dual 1G ethernet, wifi

    56 parts1

Parts like it

8

Questions

Is there a KiCad symbol and footprint for the RT9742SNGV?

Yes. The symbol is Power_Management:RT9742SNGV and the footprint Package_TO_SOT_SMD:SOT-23-3, both drawn on this page. PCBKit places them on a board for you when you design with it.

What package is the RT9742SNGV?

SOT-23-3, with 3 pins. Its footprint is drawn on this page.

Where is the RT9742SNGV datasheet?

Richtek Tech publishes it: the Datasheet link on this page opens it.

Where can I order the RT9742SNGV?

JLCPCB lists it as part C3235509, with 4,622 in stock; the sellers' links on this page open their listings.

What can replace the RT9742SNGV?

Parts like it in the library: the CH213K by WCH (Nanjing Qinheng Microelectronics), the AP2331SA by Diodes Incorporated, the WB2967J by Waferbest and the KP3111LGA by Kiwi Instruments. Check their datasheets: a part that fits the footprint may still differ in its ratings.

Which open-source boards use the RT9742SNGV?

36 boards in 29 repositories on GitHub; the most starred are listed on this page, with their KiCad files.