2 layers100 × 100 mm
LED controller
Llamero/30mm_cage_plate_LED_MCPCB
LED mount that is compatible with the Thorlabs 30 mm cage plate
45 parts9
2 layers100 × 100 mm
Four Channel MHz LED Driver
Llamero/Four_Channel_MHz_LED_Driver6High Speed Four Channel LED Driver that can run up to 30A
- Size
- 100 × 100 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 96
- Nets
- 107
- Pads
- 392
- Tracks, vias
- 1,975, 0
- Pours
- 30
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 7 Aug 2020
- Updated
- 24 Jul 2026
Overview
Four Channel MHz LED Driver is an open-source printed circuit board by Llamero, from the Llamero/Four_Channel_MHz_LED_Driver repository on GitHub. It is a 2-layer board of 100 × 100 mm with 96 parts on 107 nets, routed with 1,975 tracks and 0 vias.
It is built around the DPBW06F-05, EL7457CSZ-T7 and LT6200CS8-10, with the IRF9358TRPBF, ADP7182AUJZ-1.8-R7 and BDJ0GA5WEFJ-E2 among its other parts. Its parts include 22 capacitors, 11 ICs, 10 connectors, 7 resistors and 5 diodes. It belongs with the NXP (LPC, Kinetis, i.MX RT) boards of this library.
Main components
9DPBW06F-05
-- Power Module/Power Supply ROHSMWPower Supply Module,Power Supplies
EL7457CSZ-T7
SOIC-16-40℃~+85℃ -、Enable shutdown 12.5ns 13.5ns 13ns 14.5ns 2.4V 2A 2A 4 800mV 8V~16.5V Low Side、High Side MOSFET SOIC-16 Gate Drivers ROHSRenesas ElectronicsGate Drivers
LT6200CS8-10
SOIC81.6GHz, Rail-to-Rail Input and Output, 0.95nV/√Hz Low Noise, Operational AmplifierAnalog DevicesUncategorised
IRF9358TRPBF
SOP-8MOSFETsTECH PUBLIC
ADP7182AUJZ-1.8-R7
TSOT-5-40℃~+125℃@(Tj) 1 1.8V 185mV 18uVrms 200mA 28V 650uA 66dB@(10kHz) Fixed Negative Over Current Protection、Over Temperature Protection、Soft Start、Over Voltage Protection、Enable、Short Circuit Protection TSOT-5 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSAnalog DevicesVoltage Regulators - Linear, Low Drop Out (LDO) Regulators
BDJ0GA5WEFJ-E2
HTSOP-8-JHTSOP-8-J Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSROHM SemiconductorVoltage Regulators - Linear, Low Drop Out (LDO) Regulators
BAT54BRW
SOT-363-55℃~+125℃ 1V@100mA 2 Pair Series Connection 200mA 2uA@25V 30V 600mA SOT-363 Schottky Diodes ROHSTECH PUBLICSchottky DiodesCPT-2016-75-SMT-TR
--40℃~+85℃ 16mm 16mm 3V~20V 3mm 4kHz 75dB Passive (Externally Driven) Piezoelectric - Buzzers ROHSCUIBuzzers
SUM70060E-GE3
TO-263-55℃~+175℃ 1 N-channel 100V 131A 3.33nF 4V 81nC@10V 95pF TO-263 MOSFETs ROHSVishay IntertechnologyMOSFETs
Parts
96| Qty | Value | Footprint | References |
|---|---|---|---|
| 8 | 2.2uF | Custom Footprints:0508_Capacitor | C9, C15, C16, C17, C18, C19, C20, C22 |
| 8 | 47uF | Capacitor_SMD:C_1206_3216Metric | C4, C5, C6, C7, C8, C10, C13, C14 |
| 7 | MountingHole_Pad | Custom Footprints:Ref_only | H1, H2, H4, H5, H6, H8, H10 |
| 4 | 5 | Custom Footprints:TO-252_resistor | R3, R4, R5, R6 |
| 4 | HS-PCB | Custom Footprints:Heatsink_910-40-2-23-2-B-0 | HS1, HS2, HS3, HS4 |
| 4 | Pushbutton_with_LED | Custom Footprints:Pushbutton_LED-ELUMOATHQ3C12 | SW1, SW2, SW3, SW4 |
| 3 | 12 | Resistor_SMD:R_1210_3225Metric | R1, R2, R7 |
| 3 | 2200pF | Capacitor_SMD:C_0603_1608Metric | C11, C12, C21 |
| 3 | 7500uF | Custom Footprints:CP_Elec_18x22-EEE-FK1C752SV | C1, C2, C3 |
| 3 | BAT54BRW | Package_TO_SOT_SMD:SOT-363_SC-70-6 | D1, D2, D3 |
| 2 | 200 | Resistor_SMD:R_Array_Convex_4x0612 | RN2, RN4 |
| 2 | Conn_01x03_Female | Custom Footprints:Ref_only | J5, J7 |
| 2 | Conn_01x24_Female | Custom Footprints:Ref_only | J9, J10 |
| 2 | IRF9358TRPBF | Package_SO:SO-8_3.9x4.9mm_P1.27mm | U8, U9 |
| 2 | Jumper_NC_Small | Resistor_SMD:R_1206_3216Metric | JP3, JP6 |
| 2 | Jumper_NC_Small | Custom Footprints:20A_shunt_5104 | JP4, JP5 |
| 2 | MountingHole_Pad | Custom Footprints:M2_standoff_ground_via | H7, H9 |
| 2 | R_POT_TRIM | Custom Footprints:3224W-1-502E | RV2, RV3 |
| 2 | Thermistor | Resistor_SMD:R_0603_1608Metric | TH1, TH2 |
| 1 | 10uH | Inductor_SMD:L_1210_3225Metric | L1 |
| 1 | 12V boost | Custom Footprints:12V_DC-DC_with_header_2117 | U1 |
| 1 | 150 | Custom Footprints:EXB-2HV151JV-1605x8 | RN1 |
| 1 | 4.7k | Custom Footprints:1506-EXB-2HV472JV-for_2_oz_pour | RN3 |
| 1 | 8P8C_Shielded_x4 | Custom Footprints:RJ45_x4-RJSSE-5380-04 | J3 |
| 1 | ADP7182AUJZ-1.8-R7 | Package_TO_SOT_SMD:TSOT-23-5 | U6 |
| 1 | BDJ0GA5WEFJ-E2 | Custom Footprints:BDJ0GA5WEFJ-E2 | U5 |
| 1 | Barrel_Jack_Switch | Custom Footprints:DC-jack_54-00165 | J1 |
| 1 | CC license | Custom Footprints:Creative_commons_license | LOGO1 |
| 1 | CPT-2016-75-SMT-TR | Custom Footprints:SMT-0940-T-3V-R_9x9_alarm | BZ1 |
| 1 | Conn_01x02_Female | Custom Footprints:Wire_Pad | J2 |
| 1 | Conn_01x03_Male | Custom Footprints:Ref_only | J4 |
| 1 | Conn_01x05_Female | Custom Footprints:Ref_only | J8 |
| 1 | Conn_01x08_Female | Custom Footprints:Ref_only | J6 |
| 1 | DPBW06F-05 | Custom Footprints:DPBW06F-05_with_header | U3 |
| 1 | D_Zener | Diode_SMD:D_SOD-323 | D4 |
| 1 | EL7457CSZ-T7 | Custom Footprints:EL7457CS | U13 |
| 1 | Fan_4pin | Custom Footprints:4-pin_fan_SMD | M1 |
| 1 | Jack Polarity | Custom Footprints:Polarity_Center_Positive | LOGO2 |
| 1 | Jumper_NC_Small | Resistor_SMD:R_2010_5025Metric | JP2 |
| 1 | LED wire | Custom Footprints:L-Wire_Pad | JP1 |
| 1 | LT6200CS8-10 | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U7 |
| 1 | MountingHole_Pad | Custom Footprints:NF-A9_with_standoffs_and_bolts | H3 |
| 1 | OSHW Logo | Symbol:OSHW-Logo2_7.3x6mm_SilkScreen | LOGO3 |
| 1 | R_POT | Custom Footprints:Pot_with_header | RV1 |
| 1 | SN74LV4T125PWR | Custom Footprints:SN74LV4T125 | U2 |
| 1 | SUM70060E | Package_TO_SOT_SMD:TO-263-2 | Q1 |
| 1 | SW_SPDT | Custom Footprints:1x5_header_SSM-105-L-SV-BE-LC | SW5 |
| 1 | TMUX1204DGSR | Custom Footprints:TMUX1204DGSR | U4 |
| 1 | TVS_Diode | Custom Footprints:DO-214AA | D5 |
| 1 | Teensy3.6 | Custom Footprints:Teensy_3_6_with_headers | U12 |
Similar boards
- 2 layers72.5 × 55 mm
- 2 layers88.9 × 79.8 mm
- 4 layers54 × 38 mm
USB C breadboard power supply
bytesizedengineering/USB-C-Power-Delivery-Breadboard-Power-Supply
44 parts21 - 2 layers36 × 12 mm
Usb c power
alvarop/usb_c_power
Want to replace your non USB-C power/charge cables for USB-C ones? This project lets you do just that!
26 parts14 - 6 layers153.3 × 53 mm
SCAN
jjsprandel/SCAN_PCB
Welcome to the SCAN repository! Below, you will find all the necessary information, from hardware design to software documentation.
186 parts1 - 2 layers67.8 × 62.5 mm
- 2 layers220 × 120 mm
Questions
How big is the Four Channel MHz LED Driver PCB?
It measures 100 × 100 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Four Channel MHz LED Driver use?
96 parts, built around the DPBW06F-05, EL7457CSZ-T7, LT6200CS8-10 and IRF9358TRPBF. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Four Channel MHz LED Driver KiCad files?
From the Llamero/Four_Channel_MHz_LED_Driver repository on GitHub, at the commit this page was made from: the board is KiCAD/Four Channel MHz LED Driver/Four Channel MHz LED Driver.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Four Channel MHz LED Driver design in my own project?
Its repository states no licence, so its author keeps all rights: ask Llamero before reusing the design.