Skip to the content
12345

ADP7182AUJZ-1.8-R7

Analog DevicesExtended

-40℃~+125℃@(Tj) 1 1.8V 185mV 18uVrms 200mA 28V 650uA 66dB@(10kHz) Fixed Negative Over Current Protection、Over Temperature Protection、Soft Start、Over Voltage Protection、Enable、Short Circuit Protection TSOT-5 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHS

Part id
adi/ADP7182AUJZ-1.8-R7
Category
Voltage Regulators, Linear, Low Drop Out (LDO) Regulators
Package
TSOT-5
Pins
5
In stock
459 at JLCPCB (C659407)
Used on
2 open-source boards

Overview

The ADP7182AUJZ-1.8-R7 is a voltage Regulators, Linear, Low Drop Out (LDO) Regulator made by Analog Devices in a TSOT-5 package with 5 pins. -40℃~+125℃@(Tj) 1 1.8V 185mV 18uVrms 200mA 28V 650uA 66dB@(10kHz) Fixed Negative Over Current Protection、Over Temperature Protection、Soft Start、Over Voltage Protection、Enable、Short Circuit Protection TSOT-5 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHS.

PCBKit's library has its KiCad symbol (Regulator_Linear:ADP7182AUJZ-1.8, from KiCad's library) and its footprint (Package_TO_SOT_SMD:TSOT-23-5, from KiCad's library), ready for a KiCad board. 459 are in stock at JLCPCB (part C659407). 2 open-source boards in 2 repositories on GitHub use it.

Symbol

1GND2VIN3EN5VOUT
Regulator_Linear:ADP7182AUJZ-1.8From KiCad's library

Footprint

12345
Package_TO_SOT_SMD:TSOT-23-5From KiCad's library

Pinout

5
The pins of the ADP7182AUJZ-1.8-R7
PinNameType
1GNDPower in
2VINPower in
3ENInput
4NCNot connected
5VOUTPower out

Open-source boards using it

2
  • 2 layers100 × 100 mmFour Channel MHz LED Driver, the printed circuit board in 3D

    Four Channel MHz LED Driver

    Llamero/Four_Channel_MHz_LED_Driver

    High Speed Four Channel LED Driver that can run up to 30A

    96 parts6
  • 2 layers72.5 × 55 mmB PSU 0x00, the printed circuit board in 3D

    B PSU 0x00

    EmilsSturitis/BPSU

    Bipolar power supply board, for op-amp's and other things

    78 parts1

Parts like it

8

Questions

Is there a KiCad symbol and footprint for the ADP7182AUJZ-1.8-R7?

Yes. The symbol is Regulator_Linear:ADP7182AUJZ-1.8 and the footprint Package_TO_SOT_SMD:TSOT-23-5, both drawn on this page. PCBKit places them on a board for you when you design with it.

What package is the ADP7182AUJZ-1.8-R7?

TSOT-5, with 5 pins. Its footprint is drawn on this page.

Where is the ADP7182AUJZ-1.8-R7 datasheet?

Analog Devices publishes it: the Datasheet link on this page opens it.

Where can I order the ADP7182AUJZ-1.8-R7?

JLCPCB lists it as part C659407, with 459 in stock; the sellers' links on this page open their listings.

What can replace the ADP7182AUJZ-1.8-R7?

Parts like it in the library: the AP2112K-1.8TRG1 by Diodes Incorporated, the ME6211C18M5G-N by MICRONE, the RT9078-18GJ5 by RICHTEK and the LP5907MFX-1.8 by Texas Instruments. Check their datasheets: a part that fits the footprint may still differ in its ratings.

Which open-source boards use the ADP7182AUJZ-1.8-R7?

2 boards in 2 repositories on GitHub; the most starred are listed on this page, with their KiCad files.