
SCAN
jjsprandel/SCAN_PCB
Welcome to the SCAN repository! Below, you will find all the necessary information, from hardware design to software documentation.

USB C breadboard power supply is an open-source printed circuit board by bytesizedengineering, from the bytesizedengineering/USB-C-Power-Delivery-Breadboard-Power-Supply repository on GitHub. It is a 4-layer board of 54 × 38 mm with 44 parts on 51 nets, routed with 303 tracks and 59 vias.
It is built around the AP63203WU, CYPD3177-24LQXQT and IRF9358TRPBF, with the SS-10-15SP-LE among its other parts. Its parts include 17 resistors, 13 capacitors, 4 connectors, 2 ICs and 1 diode. It belongs with the power boards of this library.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | 5k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R3, R5, R6, R7 |
| 3 | 0.1uF | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C1, C2, C9 |
| 3 | 10k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R12, R13, R14 |
| 3 | 1uF | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C3, C8, C12 |
| 2 | 1k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R9, R15 |
| 2 | 22uF | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C10, C11 |
| 2 | 2K | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R1, R2 |
| 2 | 390pF | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C6, C7 |
| 2 | Conn_02x02_Counter_Clockwise | Connector_PinHeader_2.54mm:PinHeader_2x03_P2.54mm_Vertical_SMD | J1, J2 |
| 2 | DNP | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R4, R10 |
| 2 | ~ | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical_SMD_Pin1Left | J3, J4 |
| 1 | |||
| 1 | 0 | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R16 |
| 1 | 10uF | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C13 |
| 1 | 2.4k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R8 |
| 1 | 3.3uF | Capacitor_SMD:C_1210_3225Metric_Pad1.33x2.70mm_HandSolder | C5 |
| 1 | 4.7uH | Inductor_SMD:L_Vishay_IFSC-1515AH_4x4x1.8mm | L1 |
| 1 | 49.9k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R17 |
| 1 | AP63203WU | Package_TO_SOT_SMD:TSOT-23-6 | U2 |
| 1 | C | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C4 |
| 1 | CYPD3177-24LQXQT | Package_DFN_QFN:QFN-24-1EP_4x4mm_P0.5mm_EP2.8x2.8mm | U1 |
| 1 | D_Zener | Diode_SMD:D_SOD-123F | D1 |
| 1 | IRF9358TRPBF | Package_SO:SO-8_3.9x4.9mm_P1.27mm | Q1 |
| 1 | LOGO | New Logo:byteSizedEngineeringLogo-5mm | G*** |
| 1 | MountingHole | MountingHole:MountingHole_3.2mm_M3 | H2 |
| 1 | SS-10-15SP-LE | Project footprints:SS-10-15SP-LE_NDC | SW1 |
| 1 | USB_C_Receptacle | Connector_USB:USB_C_Receptacle_Amphenol_12401610E4-2A | USB1 |
| 1 | X | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R11 |

jjsprandel/SCAN_PCB
Welcome to the SCAN repository! Below, you will find all the necessary information, from hardware design to software documentation.



Benny-Chippers/Enchanted_Rocks
The dev board PCB for the MacroController project

alvarop/usb_c_power
Want to replace your non USB-C power/charge cables for USB-C ones? This project lets you do just that!

Llamero/Four_Channel_MHz_LED_Driver
High Speed Four Channel LED Driver that can run up to 30A

MoreThanRobotsFR/MTR_Tiny_MD
This Arduino project utilizes SimpleFOC library for sensor-based brushless motor control with a DRV8316 driver. It also incorporates an Adafruit NeoPixel for visual feedback.

Larson-Nick/SmartKnobController
This folder contains all mechanical and electrical design files for the Smart Knob Controller, created using KiCAD v9.0 and SolidWorks 2024.
It measures 54 × 38 mm and has 4 copper layers, 1.6 mm thick.
44 parts, built around the AP63203WU, CYPD3177-24LQXQT, IRF9358TRPBF and SS-10-15SP-LE. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the bytesizedengineering/USB-C-Power-Delivery-Breadboard-Power-Supply repository on GitHub, at the commit this page was made from: the board is Electrical Design/USB C breadboard power supply.kicad_pcb and its schematic Electrical Design/USB C breadboard power supply.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask bytesizedengineering before reusing the design.