
Dlr carrier
arcnode-io/dlr-rtu-pcb
Solar-powered RTU sensor HAT for transmission tower DLR deployment

The goal is to have a functioning single esc for a bldc motor. I want to use that so i can build a 4in1 esc out of it for a drone.
SingleEsc is an open-source printed circuit board by JulianTasche, from the JulianTasche/Single-Esc-for-BLDC-Motor repository on GitHub. It is a 2-layer board of 70 × 70 mm with 94 parts on 81 nets, routed with 597 tracks and 209 vias.
It is built around the LMR33630ADDA, BSC010N04LSI and BAT54W. Its parts include 39 resistors, 19 capacitors, 10 ICs, 6 connectors and 2 diodes. It belongs with the robots and motor control boards and the STM32 boards of this library.
A custom single-channel ESC (Electronic Speed Controller) for BLDC motors. I want to programm and test the esc before modifying it into a 4in1 esc i can use for flying a drone.
This repository contains the KiCad schematic and PCB layout for a single-channel ESC. The design is based on the DRV8353 gate driver and BSC010N04LSI MOSFETs, controlled by an STM32G431 microcontroller. It includes a buck converter for onboard power regulation, MOSFET-based battery backflow protection, and BEMF sensing for sensorless motor control.
.
├── KiCad_Files/ # KiCad design source
│ ├── SingleEsc.kicad_pro # KiCad project file
│ ├── SingleEsc.kicad_sch # Schematic
│ ├── SingleEsc.kicad_pcb # PCB layout
│ ├── SingleEsc-job.gbrjob # Gerber job file
│ ├── SingleEsc-all-pos.csv # Component placement export (source for pick & place)
│ ├── footprints/ # Custom footprint library
│ ├── myBibs/ # Custom schematic symbol library
│ └── fp-lib-table # Footprint library table
│
├── Gerber&BOM/ # Manufacturing data
│ ├── GerberESC/ # Gerber and drill files
│ ├── DigiKey_ESC_BOM.csv # Bill of materials (CSV)
│ ├── DigiKey_ESC_BOM.xlsx # Bill of materials (Excel)
│ ├── ESC_PickAndPlace.csv # Pick & place / component placement (CSV)
│ └── ESC_PickAndPlace.xlsx # Pick & place / component placement (Excel)
│
├── Gerber&BOM.zip # Zipped Gerber files for manufacturing
└── README.mdA BOM with all components for buying on Digikey is available in the project files. Some parts need to be bought elsewhere for example the XT60 connector.
AI was used for helping with a basic idea for a layout, learning about components and an idea of where to buy parts.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 9 | 10k | Resistor_SMD:R_0603_1608Metric | R14, R17, R20, R29, R30, R31, R32, R33, R34 |
| 7 | 10 | Resistor_SMD:R_0805_2012Metric | R6, R7, R8, R9, R10, R11, R18 |
| 7 | 100n | Capacitor_SMD:C_0603_1608Metric | C_VBAT1, C_VDD24, C_VDD36, C_VDD48, C9, C15, Cboot1 |
| 7 | 1u | Capacitor_SMD:C_0603_1608Metric | C4, C5, C7, C8, C10, C16, Cvcc1 |
| 7 | BSC010N04LSI | myfootprints:BSC010N04LSI | U11, U12, U13, U14, U15, U16, U17 |
| 6 | 1n | Capacitor_SMD:C_0603_1608Metric | C17, C18, C19, C21, C22, C23 |
| 4 | 100 | Resistor_SMD:R_0603_1608Metric | R19, R35, R36, R37 |
| 4 | 22u | Capacitor_SMD:C_1210_3225Metric | Cout1, Cout2, Cout3, Cout4 |
| 4 | 39k | Resistor_SMD:R_0603_1608Metric | R21, R23, R25, R27 |
| 4 | 6,8k | Resistor_SMD:R_0603_1608Metric | R16, R22, R24, R26 |
| 3 | 100n | Capacitor_SMD:C_0805_2012Metric | C12, C13, C14 |
| 3 | 3m | Resistor_SMD:R_2512_6332Metric | R2, R3, R12 |
| 3 | Conn_01x01_Pin | Connector_Wire:SolderWirePad_1x01_SMD_5x10mm | J4, J5, J6 |
| 2 | 100k | Capacitor_SMD:C_0603_1608Metric | R1, Rfbt1 |
| 2 | 100k | Resistor_SMD:R_0603_1608Metric | R15, R28 |
| 2 | 10k | Capacitor_SMD:C_0603_1608Metric | R4, R13 |
| 2 | 470u | Capacitor_SMD:C_1206_3216Metric | 25VPolymer1, 25VPolymer2 |
| 1 | 0 | Resistor_SMD:R_0603_1608Metric | R38 |
| 1 | 10n | Capacitor_SMD:C_0603_1608Metric | C20 |
| 1 | 10u | Capacitor_SMD:C_1210_3225Metric | Cin1 |
| 1 | 10u | Capacitor_SMD:C_0603_1608Metric | 25VX7R1210 |
| 1 | 1k | Capacitor_SMD:C_0603_1608Metric | R5 |
| 1 | 220n | Capacitor_SMD:C_0603_1608Metric | Chf1 |
| 1 | 4,7u | Capacitor_SMD:C_0603_1608Metric | C1 |
| 1 | 43,2k | Capacitor_SMD:C_0603_1608Metric | Rfbb1 |
| 1 | 47n | Capacitor_SMD:C_0603_1608Metric | C6 |
| 1 | 6,8u | Inductor_SMD_Wurth:L_Wurth_WE-LHMI-7030 | L1 |
| 1 | Akku Stecker | myfootprints:AMASS_XT60PW-M_1x02_P7.20mm_Horizontal | J3 |
| 1 | BAT54W | Package_TO_SOT_SMD:SOT-323_SC-70 | D2 |
| 1 | BZT52Bxx | Diode_SMD:D_SOD-123F | D1 |
| 1 | Conn_01x03_Pin | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Horizontal | J1 |
| 1 | Conn_ARM_JTAG_SWD_10 | Connector_PinHeader_1.27mm:PinHeader_2x05_P1.27mm_Vertical_SMD | J2 |
| 1 | DRV8353S | myfootprints:DRV8353S | U18 |
| 1 | LMR33630ADDA | Package_SO:Texas_HSOP-8-1EP_3.9x4.9mm_P1.27mm_ThermalVias | U1 |
| 1 | STM32G431CB LQFP48 | myfootprints:STM32G431CB LQFP48 | U2 |

arcnode-io/dlr-rtu-pcb
Solar-powered RTU sensor HAT for transmission tower DLR deployment

drandyhaas/HaasoscopePro
Affordable 2 GHz 3.2 GS/s 12 bit open-source open-hardware expandable USB real-time oscilloscope

jamarju/c64-psu
Efficient Commodore 64 power supply with overvoltage + overcurrent protection

Andre1Becker/GalvOS
Open-source ESP32-S3 laser show controller — built to replace proprietary OEM controllers in RGB galvo laser projectors

Coen-Lab/exp-control-board
Hardware and firmware for an experimental control board for scientific rigs

ErdemA33/stm32f405-flight-controller
Open-source ArduPilot-compatible flight controller for fixed-wing UAVs. STM32F405, 4-layer KiCad design, built in 5 modular stages.

lhr-solar/PS-MotorControllerInterfacePCB
Provides power conversion/protection and fan control for the Prohelion WaveSculptor 22 motor controller

kfilipekk/iridium_drone
STM32H743 flight controller that navigates without GPS from Iridium satellite Doppler
It measures 70 × 70 mm and has 2 copper layers, 1.6 mm thick.
94 parts, built around the LMR33630ADDA, BSC010N04LSI and BAT54W. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the JulianTasche/Single-Esc-for-BLDC-Motor repository on GitHub, at the commit this page was made from: the board is KiCad_Files/SingleEsc.kicad_pcb and its schematic KiCad_Files/SingleEsc.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask JulianTasche before reusing the design.