
BLDC ESC
JIMS-Innovations/BLDCM-ESC
This repository contains the firmware, design files and documents for a Sensorless Electronic Speed Controller (for brushless DC motors) developed by Jesutofunmi Kupoluyi.

This repository contains the firmware, design files and documents for a Sensorless Electronic Speed Controller (for brushless DC motors) developed by Jesutofunmi Kupoluyi.
BLDC ESC - V1 is an open-source printed circuit board by JIMS-Innovations, from the JIMS-Innovations/BLDCM-ESC repository on GitHub. It is a 2-layer board of 180.4 × 92.8 mm with 73 parts on 55 nets, routed with 469 tracks and 114 vias.
It is built around the ATMEGA328-PU, IR2110L4 and IRF1405. Its parts include 28 resistors, 16 capacitors, 7 connectors, 6 transistors and 5 ICs. It belongs with the robots and motor control boards and the AVR (ATmega, ATtiny) boards of this library.
This repository contains the firmware, design files and documents for a Sensorless Electronic Speed Controller (for brushless DC motors) developed by Jesutofunmi Kupoluyi.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 9 | 2.2u | Capacitor_THT:CP_Radial_D5.0mm_P2.00mm | C1, C2, C3, C4, C5, C6, C7, C8, C9 |
| 7 | 10k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R20, R21, R22, R23, R24, R25, R26 |
| 6 | 100R | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R7, R8, R9, R10, R11, R12 |
| 6 | 10K | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R1, R2, R3, R4, R5, R6 |
| 6 | 39k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R14, R15, R16, R17, R18, R19 |
| 6 | IRF1405 | Package_TO_SOT_THT:TO-220-3_Horizontal_TabDown | Q1, Q2, Q3, Q4, Q5, Q6 |
| 4 | 100u | Capacitor_THT:CP_Radial_D5.0mm_P2.50mm | C10, C11, C12, C13 |
| 3 | 1000u | Capacitor_THT:CP_Radial_D14.0mm_P7.50mm | C14, C15, C16 |
| 3 | 1N4148 | Diode_THT:D_A-405_P10.16mm_Horizontal | D1, D2, D3 |
| 3 | IR2110 | Package_DIP:DIP-14_W7.62mm | U1, U2, U3 |
| 2 | 220Ω | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R27, R28 |
| 1 | 1K | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R13 |
| 1 | ATmega328-P | Package_DIP:DIP-28_W7.62mm | U4 |
| 1 | DECREMENT | Button_Switch_THT:SW_PUSH-12mm | SW2 |
| 1 | DIR SEL | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J3 |
| 1 | ERR LED | LED_THT:LED_D5.0mm | D5 |
| 1 | INCREMENT | Button_Switch_THT:SW_PUSH-12mm | SW1 |
| 1 | ISP PORT | Connector_PinHeader_2.54mm:PinHeader_2x03_P2.54mm_Vertical | J6 |
| 1 | MIC29150 | Package_TO_SOT_THT:TO-220-3_Horizontal_TabDown | U5 |
| 1 | MOTOR | TerminalBlock_Altech:Altech_AK300_1x03_P5.00mm_45-Degree | J1 |
| 1 | POWER | TerminalBlock_Altech:Altech_AK300_1x02_P5.00mm_45-Degree | J2 |
| 1 | PWM IN | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J7 |
| 1 | PWM SEL | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J4 |
| 1 | UART | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J5 |
| 1 | WRK LED | LED_THT:LED_D5.0mm | D4 |
The 69 most common of 73 parts.

JIMS-Innovations/BLDCM-ESC
This repository contains the firmware, design files and documents for a Sensorless Electronic Speed Controller (for brushless DC motors) developed by Jesutofunmi Kupoluyi.

ambadran/spot-welder
Battery Spot Welder Circuit Using Capactive Discharge (CD) Circuit

KaeptnBalu/Arduino_Spot_Welder_V2
Arduino controlled Spot Welder for battery welding

cclienti/tig-welder
A DIY TIG welder that can be plugged to a traditionnal stick welder or to a high current source

arcoslab/open-coroco-legacy
COmpliant RObot COntroller is a free software project aiming to create an impedance controller based on a stm32 microcontroller using bldc motors and strain gauges.

chgopireddy/Full-Bridge-Class-D-Audio-Amplifier
LTspice Model for Full Bridge Class D, Voltage Mode Control, Peak Current Mode Control

AssaadMH/sensorless-bldc-control
Spinning a brushless motor with no position sensor — commutating on the back-EMF zero crossings instead.

mofaa69/modified-sine-inverter-gwo-pid
TÜBİTAK 2209-A Destekli GWO-PID Kontrollü Modifiye Sinüs İnverter Tasarımı ve Uygulaması

omerkarslioglu/forward_converter_pi_control
9-36V Input Voltage, 28 Output Voltage, All Ripple: %2, 50KHz, 50 Watt DC-DC Forward Converter Design And Production
It measures 180.4 × 92.8 mm and has 2 copper layers, 1.6 mm thick.
73 parts, built around the ATMEGA328-PU, IR2110L4 and IRF1405. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the JIMS-Innovations/BLDCM-ESC repository on GitHub, at the commit this page was made from: the board is Hardware/BLDC ESC/BLDC ESC - V1.kicad_pcb and its schematic Hardware/BLDC ESC/BLDC ESC.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask JIMS-Innovations before reusing the design.