Skip to the content
2 layers25.4 × 25.4 mmRotary encoder module, the printed circuit board in 3D

Rotary encoder module

ItsHotdogFred/Shortcut-3000

This is a elgato inspired streamdeck made using keyboard switches and rotary encoders for the hackclub forge

Size
25.4 × 25.4 mm
Copper layers
2
Thickness
1.6 mm
Parts
14
Nets
10
Pads
50
Tracks, vias
98, 11
Pours
2
Routed
Yes
KiCad
KiCad 10.0 (file 20260206)
Created
9 Sep 2026
Updated
31 Oct 2026

Overview

Rotary encoder module is an open-source printed circuit board by ItsHotdogFred, from the ItsHotdogFred/Shortcut-3000 repository on GitHub. It is a 2-layer board of 25.4 × 25.4 mm with 14 parts on 10 nets, routed with 98 tracks and 11 vias.

It is built around the 24LC024/P and PCA9537DP. Its parts include 6 capacitors, 4 resistors, 2 ICs, 1 connector and 1 switch.

Main components

2

README

README.md

Shortcut 3000

Shortcut 3000 is a shortcut device which solves a big problem when buying a shortcut device. If you have already brought one before you may notice that some stuff on it go unused or aren't fit for your purpose. This leads to wasted space and wasted potential. To avoid this happening, Shortcut 3000 contains 12 magnetic pogo pads called modules which allow you to swap stuff on it. For example: Got a key you're not using and would much rather have a rotary encoder for managing sound? Well you can do that by swapping the key module with a rotary encoder!

The secret is using i2c for communication which allows it to hold 12 modules without running out of gpio pins and also easy in code. Each module has a eeprom which is used to identify what a module is. This allows the firmware to know how to use the module. modules can also choose if they want to turn the int line into a I/O pin which is required for things like rgb strips.

image image image image
BOM ItemFootprintQty NeededSourcePart / ListingPart # / LinkBuy QtyUnit PriceLine Total (NZD)Shipping
4.7k resistor080528LCSCUNI-ROYAL 0805W8F4701T5E (C17673)Link100US$0.00510.90Combined w/ JLC order
10k resistor080519LCSCUNI-ROYAL 0805W8F1002T5E (C17414)Link100US$0.00340.60Combined w/ JLC order
WS2812B-2020 LED2.0x2.0mm20LCSCWorldsemi WS2812B-2020-V6 (C52917434)Link20US$0.09213.25Combined w/ JLC order
MagneticPogo 1x05 M+F2.54mm12M+12FAlibabaShenzhen Lixiang magnetic pogo 5P 2.54mm - '5p with positioning holes'Link12NZ$1.6519.80FREE (new-buyer promo, capped NZ$36.09; normally NZ$25.59)
MX hotswap socketKailh CPG151101S115Owned-00.00
100nF cap08054LCSCYAGEO CC0805KRX7R9BB104 (C49678)Link20US$0.02060.73Combined w/ JLC order
10nF cap08053LCSCSamsung CL21B103KBANNNC (C1710)Link50US$0.01161.02Combined w/ JLC order
1uF cap08052LCSCSamsung 1uF 0805 25V X7R (C116352)Link10US$0.04090.72Combined w/ JLC order
24LC02 EEPROMSOIC-8 narrow3LCSCMicrochip 24LC02BT-I/SN (C5453)Link5US$0.29572.61Combined w/ JLC order
TCA9548APWR muxTSSOP-242LCSCTI TCA9548APWR (C130026)Link2US$0.81922.89Combined w/ JLC order
MCP23008DIP-181LCSCMicrochip MCP23008-E/P (C646745)Link1US$2.95125.21Combined w/ JLC order
0.66in OLED64x48 I2C1AliExpress0.66in OLED SSD1306 (Wemos shield)Link1NZ$5.295.29Choice
PCA9537TSSOP-101LCSC (backorder)NXP PCA9537DP,118 (C2652305)Link1US$1.59032.81Combined w/ JLC order
RP2040-ZeroCastellated1AliExpressRP2040-Zero 1PCSLink1NZ$5.495.49Choice
EC11E encoderVertical H20mm1LCSCALPS EC11E18244A5 (C255515)Link1US$2.43554.30Combined w/ JLC order
Shortcut-3000 main PCBPCB, black, 1.6mm, LeadFree HASL1JLCPCBShortcut-3000-Gerbers_Y11Y11-13394057A5US$9.50 (per 5)16.78JLC est. (shared)
Screen module PCBPCB, black, 1.6mm, LeadFree HASL1JLCPCBscreen-module-Gerbers_Y10Y10-13394057A5US$5.20 (per 5)9.18JLC est. (shared)
Rotary encoder module PCBPCB, black, 1.6mm, LeadFree HASL1JLCPCBRotary-encoder-module-Gerbers_Y9Y9-13394057A5US$5.20 (per 5)9.18JLC est. (shared)
RGB daisy-chain module PCBPCB, black, 1.6mm, LeadFree HASL1JLCPCBrgb-daisy-chain-module-Gerbers_Y8Y8-13394057A5US$5.20 (per 5)9.18JLC est. (shared)
Protoboard module PCBPCB, black, 1.6mm, LeadFree HASL1JLCPCBproboard-module-Gerbers_Y7Y7-13394057A5US$5.20 (per 5)9.18JLC est. (shared)
5x MX switch module PCBPCB, black, 1.6mm, LeadFree HASL1JLCPCB5-MX-Switch-Module-Gerbers_Y6Y6-13394057A5US$3.30 (per 5)5.83JLC est. (shared)
TOTAL114.95

Parts

14
QtyValueFootprintReferences
310kResistor_SMD:R_0805_2012MetricR3, R4, R5
310nFCapacitor_SMD:C_0805_2012MetricC4, C5, C6
2100nFCapacitor_SMD:C_0805_2012MetricC1, C2
110kResistor_SMD:R_0815_2038MetricR2
11uFCapacitor_SMD:C_0805_2012MetricC3
124LC02Package_SO:SOIC-8_3.9x4.9mm_P1.27mmU1
1MagneticPogo_1x05_MaleMagneticPogo:MagneticPogo_1x05_P2.54mm_MaleJ1
1PCA9537Package_SO:TSSOP-10_3x3mm_P0.5mmU3
1RotaryEncoder_SwitchRotary_Encoder:RotaryEncoder_Alps_EC11E-Switch_Vertical_H20mmSW1

More from ItsHotdogFred/Shortcut-3000

5
  • 2 layers105.5 × 82.5 mmShortcut-3000, the printed circuit board in 3D

    Shortcut-3000

    ItsHotdogFred/Shortcut-3000

    This is a elgato inspired streamdeck made using keyboard switches and rotary encoders for the hackclub forge

    57 parts
  • 2 layers25.4 × 25.4 mmProboard module, the printed circuit board in 3D

    Proboard module

    ItsHotdogFred/Shortcut-3000

    This is a elgato inspired streamdeck made using keyboard switches and rotary encoders for the hackclub forge

    56 parts
  • 2 layers25.4 × 25.4 mmRgb daisy chain module, the printed circuit board in 3D

    Rgb daisy chain module

    ItsHotdogFred/Shortcut-3000

    This is a elgato inspired streamdeck made using keyboard switches and rotary encoders for the hackclub forge

    22 parts
  • 2 layers101.6 × 25.4 mm5-MX Switch Module, the printed circuit board in 3D

    5-MX Switch Module

    ItsHotdogFred/Shortcut-3000

    This is a elgato inspired streamdeck made using keyboard switches and rotary encoders for the hackclub forge

    12 parts
  • 2 layers25.4 × 25.4 mmScreen module, the printed circuit board in 3D

    Screen module

    ItsHotdogFred/Shortcut-3000

    This is a elgato inspired streamdeck made using keyboard switches and rotary encoders for the hackclub forge

    3 parts

Similar boards

  • 4 layers108.2 × 64.3 mmLuxmètre, the printed circuit board in 3D

    Luxmètre

    Korotaa/luxmetter-design_HW-PCB_SW

    Le module est un End Device LoRa. C'est un dispositif IoT permettant de mesurer le niveau de luminosité grace au capteur TSL2571 et transmettre ces données à un serveur LoRaWAN (NetWork Serveur + Application Serveur) .

    110 parts1
  • 2 layers65 × 65 mmIRIS power, the printed circuit board in 3D

    IRIS power

    calstar/iris-power-hw

    84 parts
  • 4 layers95.2 × 67.5 mm6xUSB PowMet, the printed circuit board in 3D

    6xUSB PowMet

    aleksejm/6xUSB-Power-Meter

    6 USB port Power Meter

    175 parts7
  • 2 layers95 × 139.6 mmDomonode2, the printed circuit board in 3D

    Domonode2

    NdK73/HomeAutomation

    DomoNode, DomoNode-inout, DomoDisp, etc.

    111 parts5
  • 4 layers54.6 × 89.5 mmHdmi2rgb adapter, the printed circuit board in 3D

    Hdmi2rgb adapter

    embeddedboys/hdmi2rgb_adapter

    hdmi2rgb_adapter is a simple HDMI to RGB deserializer based on TFP401 (TI)

    55 parts4MIT
  • 4 layers123.8 × 362.3 mmMidi controller, the printed circuit board in 3D

    Midi controller

    Tommie1236/midi-controller

    lighting focused midi controller

    516 parts2CERN-OHL-W-2.0
  • 4 layers39 × 37 mmHDMI SWITCH, the printed circuit board in 3D

    HDMI SWITCH

    Az154za/HDMA_DUAL_SWITCHER

    20 parts
  • 4 layers101.6 × 128.7 mmQCB board, the printed circuit board in 3D

    QCB board

    bartkepl/QCB_board

    Quad Card Backplane

    222 partsMIT

Questions

How big is the Rotary encoder module PCB?

It measures 25.4 × 25.4 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Rotary encoder module use?

14 parts, built around the 24LC024/P and PCA9537DP. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Rotary encoder module KiCad files?

From the ItsHotdogFred/Shortcut-3000 repository on GitHub, at the commit this page was made from: the board is Modules/Rotary-encoder-module/Rotary-encoder-module.kicad_pcb and its schematic Modules/5-MX-Switch-Module/5-MX-Switch-Module.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Rotary encoder module design in my own project?

Its repository states no licence, so its author keeps all rights: ask ItsHotdogFred before reusing the design.