

6xUSB PowMet
6 USB port Power Meter
- Size
- 95.2 × 67.5 mm
- Copper layers
- 4
- Thickness
- 1.5 mm
- Parts
- 175
- Nets
- 159
- Pads
- 586
- Tracks, vias
- 924, 101
- Pours
- 4
- Routed
- Yes
- KiCad
- KiCad 4
- Created
- 18 Apr 2016
- Updated
- 30 Apr 2019
Overview
6xUSB PowMet is an open-source printed circuit board by aleksejm, from the aleksejm/6xUSB-Power-Meter repository on GitHub. It is a 4-layer board of 95.2 × 67.5 mm with 175 parts on 159 nets, routed with 924 tracks and 101 vias.
It is built around the ATMEGA32U4-AU, FE1.1S and LM3150MH, with the 24LC024/P, IRLML6401 and CG0603MLC-05E among its other parts. Its parts include 51 capacitors, 49 resistors, 14 ICs, 14 connectors and 12 inductors. It belongs with the ESP8266 and AVR (ATmega, ATtiny) boards of this library.
Main components
12ATMEGA32U4-AU
QFP-44(10x10)-40℃~+85℃ 10bit 16MHz 1KB 2.5KB 2.7V~5.5V 26 32KB 8 Bit AVR Built-in FLASH QFP-44(10x10) Microcontrollers (MCU/MPU/SOC) ROHSMicrochip TechnologyMicrocontrollers (MCU/MPU/SOC)FE1.1S
SSOP-28USB 2.0 USB Hub SSOP-28 USB Converters ROHSTerminus TechUSB ConvertersLM3150MH
HTSSOP-14-EP-40℃~+125℃@(TJ) 1 12A 1MHz 6V~42V Adjustable Buck Buck External Yes HTSSOP-14-EP DC-DC Converters ROHSTexas InstrumentsDC-DC Converters24LC024/P
PDIP-81,000,000 cycles 2.5V~5.5V 200 Years 2Kbit 400kHz 5ms Hardware write protection function、Noise suppression function I2C PDIP-8 EEPROM ROHSMicrochip TechnologyEEPROMIRLML6401
SOT-23-55℃~+150℃ 1 P-Channel 1.3W 125pF 12V 15nC@5V 180pF 4.3A 830pF 85mΩ@1.8V 950mV P-Channel SOT-23 MOSFETs ROHSKEXINMOSFETsCG0603MLC-05E
0603-55℃~+125℃ 0.2pF 1 10nA 30V 5V Bidirectional IEC 61000-4-2 0603 ESD and Surge Protection (TVS/ESD) ROHSBournsVaristorsCD1206-S01575
1206-55℃~+125℃ 150mA 1V@50mA 2.5uA@75V 400mW 4A 4ns 75V Standalone 1206 Switching Diodes ROHSBournsSwitching DiodesCSD16321Q5
PDFN-8(5.2x6.2)-55℃~+150℃ 1 N-channel 1.4V 113W 150pF 177A 19nC@4.5V 2.2nF 25V 3.1nF 3.8mΩ@3V N-Channel PDFN-8(5.2x6.2) MOSFETs ROHSTexas InstrumentsMOSFETsCSD18509Q5B
VSON-CLIP-8(6x5)-55℃~+150℃ 1 N-channel 1.07nF 1.8V 100A 13.9nF 150nC@10V 1mΩ@10V 3.1W 354pF 40V N-Channel VSON-CLIP-8(6x5) MOSFETs ROHSTexas InstrumentsMOSFETsIRFR5305PBF
TO-252-3-55℃~+175℃ 1 P-Channel 1.2nF 110W 250pF 31A 4V 520pF 55V 63nC 65mΩ@10V P-Channel ±20V TO-252-3 MOSFETs ROHSInfineon TechnologiesMOSFETsMH2029-300Y
0805-55℃~+125℃ 1 30Ω@100MHz 3A 3mΩ ±25% 0805 Ferrite Beads ROHSBournsFerrite BeadsSKL14
SOD-123F(SMF)-50℃~+150℃ 1 Independent 1A 200uA@40V 25A 40V 550mV@1A SOD-123F(SMF) Schottky Diodes ROHSDIOTECSchottky Diodes
Parts
175| Qty | Value | Footprint | References |
|---|---|---|---|
| 18 | 10K | Resistors_SMD:R_0805 | R3, R4, R6, R10, R13, R15, R16, R17, R19, R26, R27, R30, R37, R39, R40, R42 +2 |
| 17 | 100n | Capacitors_SMD:C_0805 | C1, C3, C4, C5, C6, C7, C8, C10, C15, C16, C17, C27, C34, C35, C38, C48 +1 |
| 9 | 100R | Resistors_SMD:R_0805 | R14, R22, R23, R24, R25, R41, R43, R44, R47 |
| 8 | 1nF | Capacitors_SMD:C_0805 | C11, C12, C13, C14, C21, C22, C23, C42 |
| 7 | 10uF | Capacitors_SMD:C_0805 | C18, C19, C20, C28, C36, C44, C45 |
| 6 | 0.02R | Resistors_SMD:R_1206 | R2, R11, R12, R18, R20, R21 |
| 6 | F_Small | Fuse_Holders_and_Fuses:Fuse_SMD1206_Reflow | F1, F2, F3, F4, F5, F6 |
| 6 | IRLML6401 | TO_SOT_Packages_SMD:SOT-23 | Q5, Q6, Q7, Q8, Q9, Q10 |
| 6 | LT6106 | TO_SOT_Packages_SMD:SOT-23-5 | U2, U4, U5, U6, U7, U14 |
| 6 | USB_A | USB_A_Vertical:USB_A_Vertical | P1, P2, P3, P4, P5, P6 |
| 5 | WE-CNSW | Inductors_SMD:L_CommonMode_Wuerth_WE-CNSW | L2, L5, L6, L7, L10 |
| 4 | Led_Small | Inductors_SMD:L_1806 | LED1, LED2, LED3, LED4 |
| 4 | WE-CBF | Inductors_SMD:L_0603 | L8, L9, L11, L12 |
| 3 | 0.1uF | Capacitors_SMD:C_0603 | C24, C30, C33 |
| 3 | 100K | Resistors_SMD:R_0805 | R28, R38, R45 |
| 3 | 1uF | Capacitors_SMD:C_0805 | C41, C47, C49 |
| 3 | 47uF | Capacitors_SMD:C_1206 | C31, C37, C51 |
| 2 | 150R | Resistors_SMD:R_0805 | R48, R49 |
| 2 | 18pF | Capacitors_SMD:C_0805 | C26, C52 |
| 2 | 22R | Resistors_SMD:R_0805 | R7, R32 |
| 2 | 22pF | Capacitors_SMD:C_0603 | C25, C32 |
| 2 | 470R | Resistors_SMD:R_0805 | R1, R46 |
| 2 | CG0603MLC-05E | Inductors_SMD:L_0603 | RV1, RV2 |
| 2 | CONN_02X04 | Socket_Strips:Socket_Strip_Straight_2x04 | P11, P12 |
| 2 | MSMF050-2 | Resistors_SMD:R_1812 | F7, F8 |
| 1 | 0.33uF | Capacitors_SMD:C_0805 | C2 |
| 1 | 10nF | Capacitors_SMD:C_0805 | C29 |
| 1 | 12Mhz | Crystals:Crystal_HC49-SD_SMD | Y1 |
| 1 | 15K | Resistors_SMD:R_0805 | R5 |
| 1 | 15nF | Capacitors_SMD:C_0805 | C39 |
| 1 | 16.000 Mhz | Crystals:Crystal_SMD_5032-4pin_5.0x3.2mm | Y2 |
| 1 | 1K07 | Resistors_SMD:R_0805 | R35 |
| 1 | 2.7K | Resistors_SMD:R_0805 | R29 |
| 1 | 22uF | Capacitors_Tantalum_SMD:CP_Tantalum_Case-R_EIA-2012-12_Reflow | C46 |
| 1 | 237K | Resistors_SMD:R_0805 | R34 |
| 1 | 24LC02 | Housings_SOIC:SOIC-8_3.9x4.9mm_Pitch1.27mm | U1 |
| 1 | 330 | Resistors_SMD:R_0805 | R31 |
| 1 | 330uF | Capacitors_SMD:CP_Elec_6.3x5.8 | C43 |
| 1 | 4.7uH 5.2mOhm | Inductors:SELF-WE-PD-XXL | L3 |
| 1 | 470K | Resistors_SMD:R_0805 | R33 |
| 1 | 470nF | Capacitors_SMD:C_0805 | C40 |
| 1 | 5v to 3.3v LDO | TO_SOT_Packages_SMD:SOT-223-3Lead_TabPin2 | U12 |
| 1 | 73K2 | Resistors_SMD:R_0805 | R36 |
| 1 | ATMEGA32U4-AU | Housings_QFP:LQFP-44_10x10mm_Pitch0.8mm | U3 |
| 1 | BARREL_JACK | Connect:JACK_ALIM | CON2 |
| 1 | Bead/100MHZ/470ohm/2A | Resistors_SMD:R_0805_HandSoldering | L4 |
| 1 | Burn | Pin_Headers:Pin_Header_Straight_2x01 | P13 |
| 1 | CD1206-S01575 | Diodes_SMD:D_1206 | D3 |
| 1 | CONN_01X04 | Connectors_JST:JST_EH_B04B-EH-A_04x2.50mm_Straight | J2 |
| 1 | CONN_01X11 | Connectors_JST:JST_EH_B11B-EH-A_11x2.50mm_Straight | J3 |
| 1 | CSD16321Q5 | Personal:AB2_SON5x6_FET | Q2 |
| 1 | CSD18509Q5B | Personal:AB2_SON5x6_FET | Q3 |
| 1 | ESP-07v2 | ESP8266:ESP-12E | U10 |
| 1 | FE1.1s | Housings_SSOP:TSSOP-28_4.4x9.7mm_Pitch0.65mm | U9 |
| 1 | IRFR5305PBF | TO_SOT_Packages_SMD1:TO-252-2Lead | Q1 |
| 1 | LM3150 | Housings_SSOP:SSOP-14_5.3x6.2mm_Pitch0.65mm | U13 |
| 1 | LM4040N-4.1 | TO_SOT_Packages_SMD:SOT-23 | U8 |
| 1 | LTC4412 | TO_SOT_Packages_SMD:SOT-23-6 | U11 |
| 1 | Led_Small_3mm | LEDs:LED_D3.0mm_Horizontal_O6.35mm_Z6.0mm | D6 |
| 1 | MC Status | LEDs:LED_0603 | D2 |
| 1 | MH2029-300Y | Inductors_SMD:L_0805 | L1 |
| 1 | MICROUSB | kicad-libs-master:USB-MICRO-B-FCI-10118193 | J1 |
| 1 | Power DC | LEDs:LED_D3.0mm_Horizontal_O6.35mm_Z6.0mm | D9 |
| 1 | Reset | Buttons_Switches_SMD:SW_SPST_B3U-1000P | SW1 |
| 1 | Reset | Buttons_Switches_SMD:SW_SPST_B3U-3000P | SW2 |
| 1 | SK152-TP | agg:DO-214AB-SMC | D11 |
| 1 | SKL14 | Diodes_SMD:SOD-123 | D10 |
| 1 | TEST | Measurement_Points:Measurement_Point_Round-SMD-Pad_Small | TP1 |
| 1 | USB Power | LEDs:LED_D3.0mm_Horizontal_O6.35mm_Z6.0mm | D1 |
| 1 | USB_B | Connect:USB_B | P10 |
More from aleksejm/6xUSB-Power-Meter
5- 2 layers92.3 × 69 mm

- 2 layers95.2 × 67.5 mm

- 2 layers

- 2 layers73.3 × 66.8 mm

- 2 layers

Similar boards
- 2 layers68.6 × 53.3 mm

- 4 layers45.2 × 57 mm

- 2 layers101.6 × 53.4 mm

- 2 layers101.6 × 53.3 mm

ADK MEGA 2560-REV3-append
sirkha/3D-Components
These are various components and assemblies that I have modeled for use in designing 3D printed objects.
100 parts - 4 layers48.3 × 17.8 mm

Arduino Micro
sabogalc/KiCad-Arduino-Boards
A collection of Arduino boards recreated from scratch in KiCad. Legacy USB connectors have been replaced with USB-C where applicable.
48 parts95WTFPL - 2 layers100 × 54 mm

- 2 layers100 × 70 mm

- 2 layers70 × 30 mm

Questions
How big is the 6xUSB PowMet PCB?
It measures 95.2 × 67.5 mm and has 4 copper layers, 1.5 mm thick.
What parts does the 6xUSB PowMet use?
175 parts, built around the ATMEGA32U4-AU, FE1.1S, LM3150MH and 24LC024/P. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the 6xUSB PowMet KiCad files?
From the aleksejm/6xUSB-Power-Meter repository on GitHub, at the commit this page was made from: the board is Hardware/PCB/6xUSB_PowMet.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the 6xUSB PowMet design in my own project?
Its repository states no licence, so its author keeps all rights: ask aleksejm before reusing the design.