
Arduino UNO R4 WiFi
sabogalc/KiCad-Arduino-Boards
A collection of Arduino boards recreated from scratch in KiCad. Legacy USB connectors have been replaced with USB-C where applicable.

A collection of Arduino boards recreated from scratch in KiCad. Legacy USB connectors have been replaced with USB-C where applicable.
Arduino Micro is an open-source printed circuit board by sabogalc, from the sabogalc/KiCad-Arduino-Boards repository on GitHub, published under the WTFPL licence. It is a 4-layer board of 48.3 × 17.8 mm with 48 parts on 54 nets, routed with 439 tracks and 44 vias.
It is built around the LP2985-33DBV, CG0603MLC-05E and FDN340P, with the PH1-17-UA, CD1206-S01575 and ECS-160-18-33-JGN-TR among its other parts. Its parts include 13 capacitors, 10 resistors, 5 diodes, 4 connectors and 3 ICs. It belongs with the AVR (ATmega, ATtiny) boards of this library.
The Nano is a compact and versatile board that surprisingly handles many of my existing projects designed for the UNO. Its small size makes it a great choice for projects where space is at a premium.
This was the first board in this repository where I had to use a fully surface-mount USB-C connector instead of a through-hole variant. The original Nano also utilizes a surface-mount USB connector, as a through-hole option would interfere with routing and placement on the bottom layer.
While integrating the larger footprint of the USB-C connector, I had to adjust the silkscreen labels near the connector, but I ensured that all the necessary information remained clear and accessible.
Below are the screenshots of this board from KiCad's 3D board viewer.
Additionally, I have successfully built this board in real life and confirmed that it works.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 6 | 100n | Capacitor_SMD:C_0402_1005Metric | C1, C2, C6, C9, C10, C11 |
| 4 | 10k | Resistor_SMD:R_0402_1005Metric | R1, R2, R4, R9 |
| 4 | 1k | Resistor_SMD:R_0402_1005Metric | R5, R6, R7, R8 |
| 3 | 1u | Capacitor_SMD:C_0402_1005Metric | C4, C5, C7 |
| 2 | 22p | Capacitor_SMD:C_0402_1005Metric | C12, C13 |
| 2 | 22u | Capacitor_SMD:C_1210_3225Metric_Pad1.33x2.70mm_HandSolder | C3, C14 |
| 2 | 5.1k | Resistor_SMD:R_0402_1005Metric | R3, R10 |
| 2 | CG0603MLC-05E | Resistor_SMD:R_0603_1608Metric | RV1, RV2 |
| 2 | FDN340P | Package_TO_SOT_SMD:SC-59 | Q1, Q2 |
| 2 | Fiducial | Fiducial:Fiducial_1mm_Mask2mm | FID1, FID2 |
| 2 | PH1-17-UA | Connector_PinHeader_2.54mm:PinHeader_1x17_P2.54mm_Vertical | J5, J6 |
| 2 | TestPoint | TestPoint:TestPoint_Pad_D1.0mm | TP1, TP2 |
| 2 | YELLOW | LED_SMD:LED_0805_2012Metric | D1, D4 |
| 1 | 22R | Resistor_SMD:R_Array_Convex_4x0612 | RN1 |
| 1 | ATMEGA32U4-XUMU | Package_DFN_QFN:TQFN-44-1EP_7x7mm_P0.5mm_EP4.7x4.7mm | U1 |
| 1 | BLUE | LED_SMD:LED_0805_2012Metric | D5 |
| 1 | CD1206-S01575 | Diode_SMD:D_1206_3216Metric | D2 |
| 1 | ECS-160-18-33-JGN-TR | Crystal:Crystal_SMD_SeikoEpson_FA238-4Pin_3.2x2.5mm | Y3 |
| 1 | GREEN | LED_SMD:LED_0805_2012Metric | D3 |
| 1 | LP2985-3.3 | Package_TO_SOT_SMD:SOT-23-5 | U4 |
| 1 | M20-9980345 | Connector_PinHeader_2.54mm:PinHeader_2x03_P2.54mm_Vertical | J4 |
| 1 | MF-MSMF050-2 | Fuse:Fuse_1812_4532Metric_Pad1.30x3.40mm_HandSolder | F1 |
| 1 | MH2029-300Y | Inductor_SMD:L_0805_2012Metric | FB2 |
| 1 | NCP1117-5.0_SOT223 | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | U2 |
| 1 | TS06-667-30-BK-100-G-SMT-TR | Arduino Micro:SW_TS06-667-30-BK-100-G-SMT-TR | S1 |
| 1 | USB_C_Receptacle_USB2.0_16P | Connector_USB:USB_C_Receptacle_GCT_USB4110 | J3 |

sabogalc/KiCad-Arduino-Boards
A collection of Arduino boards recreated from scratch in KiCad. Legacy USB connectors have been replaced with USB-C where applicable.

sabogalc/KiCad-Arduino-Boards
A collection of Arduino boards recreated from scratch in KiCad. Legacy USB connectors have been replaced with USB-C where applicable.

sabogalc/KiCad-Arduino-Boards
A collection of Arduino boards recreated from scratch in KiCad. Legacy USB connectors have been replaced with USB-C where applicable.



kaustubh850/ArduinoEquipped
A Repo wit Arduino Uno Compatible Boards with on-board Addons.


ded811/Mega-Uno-2560
An Arduino-compatible ATmega2560 development board in the Arduino Uno form factor


olexsu/ATmega328_control_Board
Custom ATmega328 embedded control board designed in KiCad with Arduino firmware.

It measures 48.3 × 17.8 mm and has 4 copper layers, 1.6 mm thick.
48 parts, built around the LP2985-33DBV, CG0603MLC-05E, FDN340P and PH1-17-UA. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the sabogalc/KiCad-Arduino-Boards repository on GitHub, at the commit this page was made from: the board is KiCad Projects/Arduino Micro/Arduino Micro.kicad_pcb and its schematic KiCad Projects/Arduino Leonardo/ATMEGA32U4-AU.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the WTFPL licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).