Skip to the content
2 layers105.5 × 82.5 mmShortcut-3000, the printed circuit board in 3D

This is a elgato inspired streamdeck made using keyboard switches and rotary encoders for the hackclub forge

Size
105.5 × 82.5 mm
Copper layers
2
Thickness
1.6 mm
Parts
57
Nets
57
Pads
215
Tracks, vias
435, 59
Pours
2
Routed
Yes
KiCad
KiCad 10.0 (file 20260206)
Created
9 Sep 2026
Updated
31 Oct 2026

Overview

Shortcut-3000 is an open-source printed circuit board by ItsHotdogFred, from the ItsHotdogFred/Shortcut-3000 repository on GitHub. It is a 2-layer board of 105.5 × 82.5 mm with 57 parts on 57 nets, routed with 435 tracks and 59 vias.

It is built around the RP2040-ZERO. Its parts include 42 resistors, 12 connectors and 2 ICs. It belongs with the RP2040 boards of this library.

Main components

1

README

README.md

Shortcut 3000

Shortcut 3000 is a shortcut device which solves a big problem when buying a shortcut device. If you have already brought one before you may notice that some stuff on it go unused or aren't fit for your purpose. This leads to wasted space and wasted potential. To avoid this happening, Shortcut 3000 contains 12 magnetic pogo pads called modules which allow you to swap stuff on it. For example: Got a key you're not using and would much rather have a rotary encoder for managing sound? Well you can do that by swapping the key module with a rotary encoder!

The secret is using i2c for communication which allows it to hold 12 modules without running out of gpio pins and also easy in code. Each module has a eeprom which is used to identify what a module is. This allows the firmware to know how to use the module. modules can also choose if they want to turn the int line into a I/O pin which is required for things like rgb strips.

image image image image
BOM ItemFootprintQty NeededSourcePart / ListingPart # / LinkBuy QtyUnit PriceLine Total (NZD)Shipping
4.7k resistor080528LCSCUNI-ROYAL 0805W8F4701T5E (C17673)Link100US$0.00510.90Combined w/ JLC order
10k resistor080519LCSCUNI-ROYAL 0805W8F1002T5E (C17414)Link100US$0.00340.60Combined w/ JLC order
WS2812B-2020 LED2.0x2.0mm20LCSCWorldsemi WS2812B-2020-V6 (C52917434)Link20US$0.09213.25Combined w/ JLC order
MagneticPogo 1x05 M+F2.54mm12M+12FAlibabaShenzhen Lixiang magnetic pogo 5P 2.54mm - '5p with positioning holes'Link12NZ$1.6519.80FREE (new-buyer promo, capped NZ$36.09; normally NZ$25.59)
MX hotswap socketKailh CPG151101S115Owned-00.00
100nF cap08054LCSCYAGEO CC0805KRX7R9BB104 (C49678)Link20US$0.02060.73Combined w/ JLC order
10nF cap08053LCSCSamsung CL21B103KBANNNC (C1710)Link50US$0.01161.02Combined w/ JLC order
1uF cap08052LCSCSamsung 1uF 0805 25V X7R (C116352)Link10US$0.04090.72Combined w/ JLC order
24LC02 EEPROMSOIC-8 narrow3LCSCMicrochip 24LC02BT-I/SN (C5453)Link5US$0.29572.61Combined w/ JLC order
TCA9548APWR muxTSSOP-242LCSCTI TCA9548APWR (C130026)Link2US$0.81922.89Combined w/ JLC order
MCP23008DIP-181LCSCMicrochip MCP23008-E/P (C646745)Link1US$2.95125.21Combined w/ JLC order
0.66in OLED64x48 I2C1AliExpress0.66in OLED SSD1306 (Wemos shield)Link1NZ$5.295.29Choice
PCA9537TSSOP-101LCSC (backorder)NXP PCA9537DP,118 (C2652305)Link1US$1.59032.81Combined w/ JLC order
RP2040-ZeroCastellated1AliExpressRP2040-Zero 1PCSLink1NZ$5.495.49Choice
EC11E encoderVertical H20mm1LCSCALPS EC11E18244A5 (C255515)Link1US$2.43554.30Combined w/ JLC order
Shortcut-3000 main PCBPCB, black, 1.6mm, LeadFree HASL1JLCPCBShortcut-3000-Gerbers_Y11Y11-13394057A5US$9.50 (per 5)16.78JLC est. (shared)
Screen module PCBPCB, black, 1.6mm, LeadFree HASL1JLCPCBscreen-module-Gerbers_Y10Y10-13394057A5US$5.20 (per 5)9.18JLC est. (shared)
Rotary encoder module PCBPCB, black, 1.6mm, LeadFree HASL1JLCPCBRotary-encoder-module-Gerbers_Y9Y9-13394057A5US$5.20 (per 5)9.18JLC est. (shared)
RGB daisy-chain module PCBPCB, black, 1.6mm, LeadFree HASL1JLCPCBrgb-daisy-chain-module-Gerbers_Y8Y8-13394057A5US$5.20 (per 5)9.18JLC est. (shared)
Protoboard module PCBPCB, black, 1.6mm, LeadFree HASL1JLCPCBproboard-module-Gerbers_Y7Y7-13394057A5US$5.20 (per 5)9.18JLC est. (shared)
5x MX switch module PCBPCB, black, 1.6mm, LeadFree HASL1JLCPCB5-MX-Switch-Module-Gerbers_Y6Y6-13394057A5US$3.30 (per 5)5.83JLC est. (shared)
TOTAL114.95

Parts

57
QtyValueFootprintReferences
284.7kResistor_SMD:R_0805_2012MetricR1, R2, R10, R11, R12, R13, R14, R15, R16, R17, R18, R19, R20, R21, R22, R23 +12
1410kResistor_SMD:R_0805_2012MetricR5, R6, R7, R8, R33, R34, R35, R36, R37, R38, R39, R40, R41, R42
12MagneticPogo_1x05_FemaleShortcut-3000:MagneticPogo_1x05_P2.54mm_FemaleJ1, J2, J3, J4, J5, J6, J7, J8, J9, J10, J11, J12
2TCA9548APWRPackage_SO:TSSOP-24_4.4x7.8mm_P0.65mmU1, U2
1RP2040-ZeroShortcut-3000:RP2040-Zero_CastellatedA1

More from ItsHotdogFred/Shortcut-3000

5
  • 2 layers25.4 × 25.4 mmProboard module, the printed circuit board in 3D

    Proboard module

    ItsHotdogFred/Shortcut-3000

    This is a elgato inspired streamdeck made using keyboard switches and rotary encoders for the hackclub forge

    56 parts
  • 2 layers25.4 × 25.4 mmRgb daisy chain module, the printed circuit board in 3D

    Rgb daisy chain module

    ItsHotdogFred/Shortcut-3000

    This is a elgato inspired streamdeck made using keyboard switches and rotary encoders for the hackclub forge

    22 parts
  • 2 layers25.4 × 25.4 mmRotary encoder module, the printed circuit board in 3D

    Rotary encoder module

    ItsHotdogFred/Shortcut-3000

    This is a elgato inspired streamdeck made using keyboard switches and rotary encoders for the hackclub forge

    14 parts
  • 2 layers101.6 × 25.4 mm5-MX Switch Module, the printed circuit board in 3D

    5-MX Switch Module

    ItsHotdogFred/Shortcut-3000

    This is a elgato inspired streamdeck made using keyboard switches and rotary encoders for the hackclub forge

    12 parts
  • 2 layers25.4 × 25.4 mmScreen module, the printed circuit board in 3D

    Screen module

    ItsHotdogFred/Shortcut-3000

    This is a elgato inspired streamdeck made using keyboard switches and rotary encoders for the hackclub forge

    3 parts

Similar boards

  • 2 layers132.3 × 94.9 mmCheapino, the printed circuit board in 3D

    Cheapino

    tompi/cheapino

    An affordable split 36 keys keyboard

    59 parts1.2kCC-BY-4.0
  • 2 layers321 × 92.3 mmMx40, the printed circuit board in 3D

    Mx40

    zzeneg/stront

    Split keyboards with 38 or 40 keys, LCD display and Cirque trackpad

    181 parts353MIT
  • 2 layers255.9 × 99.3 mmZerosprey42, the printed circuit board in 3D

    Zerosprey42

    beekeeb/zerosprey42

    Zerosprey42 Keyboard is a wired, beginner friendly, choc hotswap, MonoBlockSplit (Unibody), column-staggered, DIY mechanical keyboard.

    96 parts140
  • 2 layers146.3 × 69.5 mmStress, the printed circuit board in 3D

    Stress

    GroooveBob/Stress

    Pocket Arcade Fight Pad

    22 parts102MIT
  • 2 layers54 × 64 mmDonConIOmini, the printed circuit board in 3D

    DonConIOmini

    ravinrabbid/DonCon2040

    RP2040 based firmware and hardware for DIY Taiko no Tatsujin Drum Controllers

    96 parts66MIT
  • 2 layers52 × 50 mmRP2040-TestPatternGenerator VGA, the printed circuit board in 3D

    RP2040-TestPatternGenerator VGA

    nmur/RP2040-TestPatternGenerator

    A simple test pattern generator running on the RP2040 microcontroller

    12 parts64GPL-3.0
  • 2 layers120 × 40 mmBuinchiez40, the printed circuit board in 3D

    Buinchiez40

    ChrisChrisLoLo/bunchiez40

    A pocket keyboard that makes use of mouse switches to achieve a miniscule size

    90 parts56GPL-3.0
  • 2 layers305.2 × 76.2 mmSoroka, the printed circuit board in 3D

    Soroka

    kapee1/soroka

    40% DIY-keyboard with base kit support

    126 parts47Unlicense

Questions

How big is the Shortcut-3000 PCB?

It measures 105.5 × 82.5 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Shortcut-3000 use?

57 parts, built around the RP2040-ZERO. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Shortcut-3000 KiCad files?

From the ItsHotdogFred/Shortcut-3000 repository on GitHub, at the commit this page was made from: the board is Shortcut-3000.kicad_pcb and its schematic Modules/5-MX-Switch-Module/5-MX-Switch-Module.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Shortcut-3000 design in my own project?

Its repository states no licence, so its author keeps all rights: ask ItsHotdogFred before reusing the design.