Skip to the content
2 layers305.2 × 76.2 mmSoroka, the printed circuit board in 3D

40% DIY-keyboard with base kit support

Size
305.2 × 76.2 mm
Copper layers
2
Thickness
1.6 mm
Parts
126
Nets
73
Pads
461
Tracks, vias
311, 5
Routed
Yes
KiCad
KiCad 8.0 (file 20240108)
Created
14 Jan 2024
Updated
19 Oct 2025

Overview

Soroka is an open-source printed circuit board by kapee1, from the kapee1/soroka repository on GitHub, published under the Unlicense licence. It is a 2-layer board of 305.2 × 76.2 mm with 126 parts on 73 nets, routed with 311 tracks and 5 vias.

It is built around the RP2040-ZERO and 1N4148W. Its parts include 57 switches, 52 diodes and 1 IC. It belongs with the RP2040 boards of this library.

Main components

2

README

README.md

soroka - DIY-Friendly 40% keyboard

PXL_20240908_092151507

Build guide [EN] | [RU]

Parts for v1 and v2 are not compatible!

Main features:

  • Easy to build. Great for soldering practice.
  • Supports all cyrillic symbols in base layer.
  • Compatible with most base-kit keycap sets. No 40s addons needed.
  • Optional Panasonic EVQWGD001 or EC-11 encoder
  • Plate also optional. You can build keyboard without a plate to reduce cost.
  • Variable bottom-row with a 3u spacebars support.
  • Customizable magnet panels
  • VIAL/QMK/ZMK Firmware by aroum
  • NEW! Hotswap PCB (untested, but should be fine). Hotswap PCB uses different diodes. Please check the BOM file at the end of this README file.

Layout:

keyboard-layout (2)

Sizes:

sizes

Hotswap PCB BOM (Be careful, it's still untested!)

PartQuantity
Soroka PCB (HS)1
RP2040-Zero (unsoldered pins)1
Any MX Hotswap Sockets52
BAT54C, SOT-23 Diodes27
Panasonic EVQWGD001 (optional) or EC-11 Encoder1

Soldered PCB BOM

PartQuantity
Soroka PCB (Soledered)1
RP2040-Zero (unsoldered pins)1
1N4148w SOD-123 Diodes50
Panasonic EVQWGD001 (optional) or EC-11 Encoder1

Assembly BOM:

PartQuantity
Soroka PCB (Soldered or Hotswap)1
Soroka Plate (Optional)1
Soroka Case1
Soroka Panel1
Soroka Spacer1
Oval feets 22x4x1.5mm4
Silicone washers 2x5x19
M2 x 4mm Screws13
M2 Inserts 3mm (OD3.2)13
Round magnets 3x1 mm8

In case of cover with screws, you don't need spacer and magnets, but you will need:

PartQuantity
M2 x 5 mm Screws8
M2 Brass Standoffs Female-Female 11 mm4

Parts

126
QtyValueFootprintReferences
521N4148Wkapee-keeb-parts:D_SOD-123D1, D2, D10, D11, D12, D13, D14, D15, D16, D17, D18, D19, D20, D21, D22, D23 +36
36MX100kapee-keeb-parts:MX100SW2, SW10, SW11, SW12, SW13, SW14, SW16, SW17, SW18, SW19, SW20, SW21, SW22, SW23, SW24, SW25 +20
13kapee-keeb-parts:, , , , , , , , , , , , MP
6MX125kapee-keeb-parts:MX125SW42, SW43, SW44, SW51, SW52, SW53
23ukapee-keeb-parts:MX300RSW46, SW49
2MX200Rkapee-keeb-parts:MX200RSW**, SW**
11.25ukapee-keeb-parts:MX125SW39
11.75ukapee-keeb-parts:MX175SW55
11ukapee-keeb-parts:MX100SW41
12.25ukapee-keeb-parts:MX225SW40
12.25ukapee-keeb-parts:MX225RSW47
12.75ukapee-keeb-parts:MX275RSW54
17ukapee-keeb-parts:MX100SW48
1LOGOLOGOG***
1MX150kapee-keeb-parts:MX150SW1
1MX175kapee-keeb-parts:MX175SW27
1MX225Rkapee-keeb-parts:MX225SW28
1RP2040-Zerokapee-keeb-parts:MCU_rp2040-zero-thtU1
1RotaryEncoder_Switchkapee-keeb-parts:RotaryEncoder_Alps_EC11E-Switch_Vertical_H20mmSW55
1Rotary_Encoder_Switchkapee-keeb-parts:EVQWGD001SW3
1Steppedkapee-keeb-parts:MX125SW15

More from kapee1/soroka

1
  • 2 layers305.2 × 76.2 mmSoroka, the printed circuit board in 3D

    Soroka

    kapee1/soroka

    40% DIY-keyboard with base kit support

    96 parts47Unlicense

Similar boards

  • 2 layers258.2 × 96.8 mmNarfkb, the printed circuit board in 3D

    Narfkb

    sebastian-stumpf/narfkb

    rp2040 powered split keyboard with rotary encoders and 6mm tactile buttons

    108 parts29MIT
  • 2 layers317.2 × 109.9 mmFutaba pcb, the printed circuit board in 3D

    Futaba pcb

    geek-rabb1t/futaba

    Futaba is a keyboard with trackpad.

    106 parts27MIT
  • 2 layers302.4 × 99.4 mmNarfkb2, the printed circuit board in 3D

    Narfkb2

    sebastian-stumpf/narfkb2

    6x3 split keyboard powered by rp2040-zero

    120 parts26MIT
  • 2 layers245.3 × 78.6 mmSg48key2, the printed circuit board in 3D

    Sg48key2

    sago35/keyboards

    This repository was created to manage the circuitry and firmware for the keyboards I designed. The firmware is created using sago35/tinygo-keyboard.

    158 parts22MIT
  • 2 layers76.1 × 116.7 mmOmsk, the printed circuit board in 3D

    Omsk

    aroum/omsk

    You can choose any one of the following encoder models:

    88 parts21GPL-3.0
  • 2 layers229.2 × 116.9 mmMacropad, the printed circuit board in 3D

    Macropad

    doesntfazer/MacroMacro

    a large gaming macro pad that runs on Vial

    109 parts11GPL-3.0
  • 2 layers141 × 22 mmFreshboard, the printed circuit board in 3D

    Freshboard

    CountParadox/Freshboard

    6 Key Macro Keypad using RP2040 Zero

    13 parts10
  • 2 layers214.8 × 146.4 mmGoobertrax E, the printed circuit board in 3D

    Goobertrax E

    doesntfazer/Goober

    hummingbird-like keyboard

    85 parts4

Questions

How big is the Soroka PCB?

It measures 305.2 × 76.2 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Soroka use?

126 parts, built around the RP2040-ZERO and 1N4148W. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Soroka KiCad files?

From the kapee1/soroka repository on GitHub, at the commit this page was made from: the board is v2/soroka-v2-pcb/soroka.kicad_pcb and its schematic v1 [outdated]/soroka-pcb/soroka.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Soroka design in my own project?

Its repository publishes it under the Unlicense licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).