Skip to the content
2 layers258.2 × 96.8 mmNarfkb, the printed circuit board in 3D

rp2040 powered split keyboard with rotary encoders and 6mm tactile buttons

Size
258.2 × 96.8 mm
Copper layers
2
Thickness
1.6 mm
Parts
108
Nets
90
Pads
546
Tracks, vias
593, 75
Pours
2
Routed
Yes
KiCad
KiCad 7 (file 20221018)
Created
1 Apr 2023
Updated
9 Apr 2023

Overview

Narfkb is an open-source printed circuit board by sebastian-stumpf, from the sebastian-stumpf/narfkb repository on GitHub, published under the MIT licence. It is a 2-layer board of 258.2 × 96.8 mm with 108 parts on 90 nets, routed with 593 tracks and 75 vias.

It is built around the RP2040-ZERO and 1N4148W. Its parts include 44 diodes, 44 switches, 2 ICs and 2 connectors. It belongs with the keyboards and input boards and the RP2040 boards of this library.

Main components

2

README

README.md

narfkb

narfkb

More pictures here

Attention

I'm a hobbyist/amateur at best. So there may be things that aren't optimized. For example the routing on the PCB is a hot mess and the spacers between the plate should be 3.4mm but there aren't any spacers that size. That being said I've had the files in the gerbers/ directory manufactured at JLC with 1.6mm size and they work just fine with the code provided in the qmk/ directory. So if you decide to use this, then please be advised that I'm not providing any sort of liability and you should exercise some caution.

BOM

QuantityItemComment
2Waveshare RP2040-Zero
2IC-Sockets for MCUOptional but recommended
2TRRS Sockets
441N4148 SOD123 diodes
30MX Hotswap Sockets
6Choc Hotswap Sockets
2EC11 Encoders
6Omrom 6mm Tact switchesB3F-1002
30MX Switches + Keycaps
6Choc Switches + Keycaps
12M2 Screws, Nuts, Bolts and Spacers

Feedback

I'm always happy to hear your opinions about this and if you decide to build this board then please do send me a picture of it.

Parts

108
QtyValueFootprintReferences
441N4148Wsepp:D_SOD-123D1, D2, D10, D11, D12, D13, D14, D15, D16, D17, D18, D19, D20, D21, D22, D23 +28
30MX_SW_HSsepp:SW_MX_HS_1uSW1, SW2, SW3, SW10, SW12, SW13, SW14, SW15, SW16, SW23, SW24, SW25, SW26, SW27, SW29, SW30 +14
12MountingHoleMountingHole:MountingHole_2.2mm_M2H1, H2, H3, H4, H5, H6, H11, H12, H13, H14, H15, H16
6actionswitchsepp:actionswitchSW17, SW18, SW19, SW34, SW35, SW36
6choc_SW_HSsepp:SW_choc_HS_1uSW20, SW21, SW22, SW42, SW43, SW44
4mousebitessepp:breakaway-mousebitesH7, H8, H9, H10
2MJ-4PP-9sepp:MJ-4PP-9J1, J2
2RotaryEncoder_Switchsepp:RotaryEncoder_EC11SW11, SW28
2rp2040-zerosepp:rp2040-zero-thtU1, U2

Similar boards

  • 2 layers305.2 × 76.2 mmSoroka, the printed circuit board in 3D

    Soroka

    kapee1/soroka

    40% DIY-keyboard with base kit support

    126 parts47Unlicense
  • 2 layers317.2 × 109.9 mmFutaba pcb, the printed circuit board in 3D

    Futaba pcb

    geek-rabb1t/futaba

    Futaba is a keyboard with trackpad.

    106 parts27MIT
  • 2 layers302.4 × 99.4 mmNarfkb2, the printed circuit board in 3D

    Narfkb2

    sebastian-stumpf/narfkb2

    6x3 split keyboard powered by rp2040-zero

    120 parts26MIT
  • 2 layers245.3 × 78.6 mmSg48key2, the printed circuit board in 3D

    Sg48key2

    sago35/keyboards

    This repository was created to manage the circuitry and firmware for the keyboards I designed. The firmware is created using sago35/tinygo-keyboard.

    158 parts22MIT
  • 2 layers76.1 × 116.7 mmOmsk, the printed circuit board in 3D

    Omsk

    aroum/omsk

    You can choose any one of the following encoder models:

    88 parts21GPL-3.0
  • 2 layers229.2 × 116.9 mmMacropad, the printed circuit board in 3D

    Macropad

    doesntfazer/MacroMacro

    a large gaming macro pad that runs on Vial

    109 parts11GPL-3.0
  • 2 layers141 × 22 mmFreshboard, the printed circuit board in 3D

    Freshboard

    CountParadox/Freshboard

    6 Key Macro Keypad using RP2040 Zero

    13 parts10
  • 2 layers214.8 × 146.4 mmGoobertrax E, the printed circuit board in 3D

    Goobertrax E

    doesntfazer/Goober

    hummingbird-like keyboard

    85 parts4

Questions

How big is the Narfkb PCB?

It measures 258.2 × 96.8 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Narfkb use?

108 parts, built around the RP2040-ZERO and 1N4148W. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Narfkb KiCad files?

From the sebastian-stumpf/narfkb repository on GitHub, at the commit this page was made from: the board is pcb/narfkb.kicad_pcb and its schematic pcb/narfkb.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Narfkb design in my own project?

Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).