Skip to the content
2 layers54 × 64 mmDonConIOmini, the printed circuit board in 3D

RP2040 based firmware and hardware for DIY Taiko no Tatsujin Drum Controllers

Size
54 × 64 mm
Copper layers
2
Thickness
1.6 mm
Parts
96
Nets
87
Pads
285
Tracks, vias
483, 39
Pours
1
Routed
Yes
KiCad
KiCad 9.0 (file 20241229)
Created
14 Jun 2023
Updated
9 Sep 2026

Overview

DonConIOmini is an open-source printed circuit board by ravinrabbid, from the ravinrabbid/DonCon2040 repository on GitHub, published under the MIT licence. It is a 2-layer board of 54 × 64 mm with 96 parts on 87 nets, routed with 483 tracks and 39 vias.

It is built around the CRV1D0512SC, MCP3204-CI/P and RP2040-ZERO, with the TXB0104D and BAT43 among its other parts. Its parts include 33 resistors, 24 diodes, 20 capacitors, 6 ICs and 5 connectors. It belongs with the keyboards and input and audio and music boards and the RP2040 and RP2350 boards of this library.

Main components

5

README

pcb/DonConPad/README.md

DonConPad - A Simple I2C Gamepad with Display

This board breaks out an MCP23017 I/O expander to some conveniently placed push buttons and offers a spot for an SSD1306 OLED display. Both I/O expander and display are connected to the same i2c bus.

The i2c address for the MCP23017 can be configured using the jumpers JP1, JP2 and JP3, which are pulled down to GND when open.

DonConPad PCB

Case

A 3D-printable case can be found in the case subdirectory. Print the Top, the Bottom and 14 Buttons. Insert 6mm diameter M4 heat set inserts into the top part and screw together using M4 screws.

Bill of Materials

ReferenceDescriptionDigikey PartNotes
J1SSD1306 OLED Display Module-Dimension wise 128x64 or 128x32 should fit. Make sure the pinout matches.
J25Pin S5B-PH-K-S Connector455-1722-NDPHR-5 plus SPH-002T-P0.5L is the counterpart
U1MCP23017 IO ExpanderMCP23017-E/SO-ND
SW1-146x6mm Tactile Switche.g. TS02-66-60-BK-100-LCR-D
C10.1µF SMD Ceramic Capacitor1276-1003-1-ND
C210µF SMD Ceramic Capacitor1276-6454-1-ND
R1, R2, R3, R4, R5, R610kΩ SMD Resistor2019-RK73H2ATTD1002FCT-ND

Parts

96
QtyValueFootprintReferences
121N4148Diode_SMD:D_SOD-323_HandSolderingD1, D2, D5, D7, D8, D11, D13, D14, D17, D19, D20, D23
8BAT43Diode_SMD:D_SOD-323_HandSolderingD3, D4, D9, D10, D15, D16, D21, D22
510kResistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolderR7, R16, R25, R34, R37
40.1uFCapacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolderC20, C22, C24, C25
40.47uFCapacitor_SMD:C_1206_3216Metric_Pad1.33x1.80mm_HandSolderC2, C4, C6, C8
4100Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolderR4, R13, R22, R31
4100kResistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolderR3, R12, R21, R30
4100nFCapacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolderC9, C10, C13, C14
41MResistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolderR1, R10, R19, R28
41kResistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolderR8, R17, R26, R35
41nFCapacitor_THT:C_Rect_L7.2mm_W2.5mm_P5.00mm_FKS2_FKP2_MKS2_MKP2C1, C3, C5, C7
4300Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolderR9, R18, R27, R36
44.3VDiode_SMD:D_SOD-323_HandSolderingD6, D12, D18, D24
44.7kResistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolderR2, R11, R20, R29
45.1kResistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolderR6, R15, R24, R33
4MountingHole_PadMountingHole:MountingHole_4.5mm_Pad_TopOnlyH1, H2, H3, H4
21uFCapacitor_THT:CP_Radial_D5.0mm_P2.00mmC18, C19
2TL074Package_SO:SOIC-14_3.9x8.7mm_P1.27mmU1, U2
110uFCapacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolderC21
14.7uFCapacitor_THT:CP_Radial_D5.0mm_P2.00mmC17
1CRV1D0512SCCustom:CRV1DxxxSCPS1
1Don LeftConnector_JST:JST_PH_S2B-PH-K_1x02_P2.00mm_HorizontalJ2
1Don RightConnector_JST:JST_PH_S2B-PH-K_1x02_P2.00mm_HorizontalJ3
1Donchan-Logo_6.3mm_SilkscreenCustomLogos:Donchan-Logo_6.3mm_SilkscreenREF02
1Ka LeftConnector_JST:JST_PH_S2B-PH-K_1x02_P2.00mm_HorizontalJ1
1Ka RightConnector_JST:JST_PH_S2B-PH-K_1x02_P2.00mm_HorizontalJ4
1MCP1541-TTPackage_TO_SOT_SMD:SOT-23U6
1MCP3204Package_SO:SOIC-14_3.9x8.7mm_P1.27mmU5
1OSHW-Logo2_7.3x6mm_SilkScreenSymbol:OSHW-Logo2_7.3x6mm_SilkScreenREF01
1PadConnector_JST:JST_PH_S5B-PH-K_1x05_P2.00mm_HorizontalJ5
1RP2040-ZeroRP2040-Zero:RP2040 ZeroU3
1TXB0104DPackage_SO:SOIC-14_3.9x8.7mm_P1.27mmU7

The 95 most common of 96 parts.

More from ravinrabbid/DonCon2040

1
  • 2 layers78.7 × 40.6 mmDonConPad, the printed circuit board in 3D

    DonConPad

    ravinrabbid/DonCon2040

    RP2040 based firmware and hardware for DIY Taiko no Tatsujin Drum Controllers

    31 parts66MIT

Similar boards

  • 2 layers130.8 × 58.4 mmRavinrabbid DonCon2040 DonConIO, the printed circuit board in 3D

    Ravinrabbid DonCon2040 DonConIO

    punkfab/pcb-corpus

    235 real KiCad boards from open-source hardware repositories, prepared as a placement and routing benchmark

    106 parts1
  • 2 layers100 × 100 mmWifi PB panel, the printed circuit board in 3D

    Wifi PB panel

    AntonioMR/Wifi-Play-Board

    Placa de experimentacion para el ESP12F (ESP8266)

    416 parts29
  • 2 layers101.9 × 83.8 mmPCB onigiricon, the printed circuit board in 3D

    PCB onigiricon

    itaiko-project/ITAIKO-hardware

    An open source Taiko no Tatsujin drum, originally based on Kasashiki's HIDtaiko and ravinrabbid's DonCon2040.

    43 parts25
  • 4 layers59.2 × 106.4 mmAlphaosc, the printed circuit board in 3D

    Alphaosc

    russellmcc/alphaosc

    eurorack digital audio oscillator for synthesizers

    108 parts8GPL-3.0
  • 2 layers106.8 × 73.5 mmDc electronic load, the printed circuit board in 3D

    Dc electronic load

    joeferner/dc-electronic-load

    DC Electronic Load

    107 parts6
  • 2 layers138 × 77 mmUSB curve tracer, the printed circuit board in 3D

    USB curve tracer

    schuyler4/USB_Curve_Tracer

    This is a curve tracer design.

    91 parts5MIT
  • 2 layers30 × 60 mmUpLink, the printed circuit board in 3D

    UpLink

    radeeyate/UpLink

    HAB Payload

    37 parts4
  • 2 layers22.9 × 26.7 mmDAC ADC SPI Module, the printed circuit board in 3D

    DAC ADC SPI Module

    Bobrowicz/DAC-ADC-SPI-Module

    Small PCB module featuring SPI connected 12 bit two channel DAC and 12 bit four channel ADC wih external reference.

    13 parts1

Questions

How big is the DonConIOmini PCB?

It measures 54 × 64 mm and has 2 copper layers, 1.6 mm thick.

What parts does the DonConIOmini use?

96 parts, built around the CRV1D0512SC, MCP3204-CI/P, RP2040-ZERO and TXB0104D. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the DonConIOmini KiCad files?

From the ravinrabbid/DonCon2040 repository on GitHub, at the commit this page was made from: the board is pcb/DonConIOmini/DonConIOmini.kicad_pcb and its schematic pcb/DonConIO/DonConIO.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the DonConIOmini design in my own project?

Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).