2 layers124 × 112 mm
2 layers37.9 × 56.9 mm
DVDBreakOut
GaudiLabs/DVDBreakOut6Simple breakout board to control the laser and the two coils of an Optical Laser Pick-up Unit
- Size
- 37.9 × 56.9 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 36
- Nets
- 19
- Pads
- 79
- Tracks, vias
- 148, 17
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 4
- Created
- 31 Oct 2018
- Updated
- 31 Oct 2018
Overview
DVDBreakOut is an open-source printed circuit board by GaudiLabs, from the GaudiLabs/DVDBreakOut repository on GitHub, published under the GPL-3.0 licence. It is a 2-layer board of 37.9 × 56.9 mm with 36 parts on 19 nets, routed with 148 tracks and 17 vias.
It is built around the MCP6002-I/P. Its parts include 11 crystals, 10 resistors, 2 capacitors, 2 ICs and 1 diode.
Main components
1README
README.mdDVDBreakOut
Simple breakout board to controll the laser and the two coils of an Optical Laser Pickup Unit
Parts
36| Qty | Value | Footprint | References |
|---|---|---|---|
| 3 | POT | GaudiLabsFootPrints:POT_OvalPads | RV1, RV2, RV3 |
| 3 | REF | GaudiLabsFootPrints:PAD_SMD_3mm | X6, X8, X13 |
| 2 | 15k | Capacitors_SMD:C_0805 | R2, R3 |
| 2 | 6.8k | Capacitors_SMD:C_0805 | R4, R5 |
| 2 | MountPad3 | GaudiLabsFootPrints:MountingHoleM3 | X1, X2 |
| 1 | +5V | GaudiLabsFootPrints:PAD_SMD_3mm | X9 |
| 1 | 1.8k | Capacitors_SMD:C_0805 | R7 |
| 1 | 10 | Capacitors_SMD:C_0805 | R10 |
| 1 | 100 | Capacitors_SMD:C_0805 | R8 |
| 1 | 100n | Capacitors_SMD:C_0805 | C1 |
| 1 | 10k | Capacitors_SMD:C_0805 | R9 |
| 1 | 1nF | Capacitors_SMD:C_0805 | C3 |
| 1 | 470 | Capacitors_SMD:C_0805 | R1 |
| 1 | 8.2k | Capacitors_SMD:C_0805 | R6 |
| 1 | GND | GaudiLabsFootPrints:PAD_SMD_3mm | X7 |
| 1 | I_LASER | GaudiLabsFootPrints:PAD_SMD_3mm | X12 |
| 1 | LED | Capacitors_SMD:C_0805 | D1 |
| 1 | LOGO | GaudiLabsLogos:DVDbreakout_Front | G*** |
| 1 | LOGO | GaudiLabsLogos:opensourcebarcode | G*** |
| 1 | LOGO | GaudiLabsLogos:DVDbreakout_frame | G*** |
| 1 | LOGO | GaudiLabsLogos:GaudiLabs_8 | G*** |
| 1 | LOGO | GaudiLabsLogos:SF_HD65_bw_smaller | G*** |
| 1 | LOGO | GaudiLabsLogos:DVDbreakout_schematic | G*** |
| 1 | MCP6002 | GaudiLabsFootPrints:SOIC-08_N | U2 |
| 1 | OUT1 | GaudiLabsFootPrints:PAD_SMD_3mm | X10 |
| 1 | OUT2 | GaudiLabsFootPrints:PAD_SMD_3mm | X11 |
| 1 | Q_NMOS_GDS | TO_SOT_Packages_SMD:TO-252-2Lead | Q1 |
| 1 | TCA0372_DWG | GaudiLabsFootPrints:SO-16-W | U1 |
| 1 | VCC | GaudiLabsFootPrints:PAD_SMD_3mm | X5 |
Similar boards
- 2 layers144 × 80 mm
DVDLaserScanner
GaudiLabs/OpenLaserScanningMicroscope
Open Source Laser Scanning Microscope
83 parts345GPL-3.0 - 2 layers50.8 × 107.9 mm
- 4 layers60 × 95 mm
STM32H7 GuitarPedal
GuitarML/GuitarPedalSTM32
Guitar pedal using a stm32h7 microcontroller programmed with CubeIDE (PCB and Firmware)
101 parts100MIT - 2 layers72.4 × 91.4 mm
Pedal pi Robin
thawney/PedalPiV2
Pedal Pi V2 by Thawney is an all new and regularly maintained Pedal-Pi by electrosmash; a lo-fi programmable guitar pedal that works with the Raspberry Pi ZERO Board.
54 parts45GPL-3.0 - 2 layers97 × 77.5 mm
ESPlant
CCHS-Melbourne/ESPlant
Environmental Sensor Plant - solar WiFi gardening/meteorological sensor using ESP8266
77 parts37 - 2 layers48 × 110 mm
- 2 layers65 × 56 mm
Questions
How big is the DVDBreakOut PCB?
It measures 37.9 × 56.9 mm and has 2 copper layers, 1.6 mm thick.
What parts does the DVDBreakOut use?
36 parts, built around the MCP6002-I/P. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the DVDBreakOut KiCad files?
From the GaudiLabs/DVDBreakOut repository on GitHub, at the commit this page was made from: the board is DVDBreakOut.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the DVDBreakOut design in my own project?
Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).