

MMDVM RPT Hat
MMDVM_RPT_Hat for the Raspberry Pi
- Size
- 65 × 56 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 119
- Nets
- 129
- Pads
- 386
- Tracks, vias
- 659, 111
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 5 (file 20200119)
- Created
- 28 Sep 2020
- Updated
- 28 Sep 2020
Overview
MMDVM RPT Hat is an open-source printed circuit board by mathisschmieder, from the mathisschmieder/MMDVM_RPT_Hat repository on GitHub. It is a 2-layer board of 65 × 56 mm with 119 parts on 129 nets, routed with 659 tracks and 111 vias.
It is built around the MCP6002-I/P and LD1117S33TR(MS). Its parts include 36 capacitors, 36 resistors, 11 diodes, 8 connectors and 4 ICs. It belongs with the STM32 boards of this library.
Main components
2MCP6002-I/P
PDIP-8-40℃~+85℃ 1.8V~6V 100uA 1MHz 1pA 1pA 2 23mA 28nV/√Hz@1kHz 2uV/℃ 4.5mV 600V/ms 76dB ESD protection Rail-to-Rail Input, Rail-to-Rail Output PDIP-8 Operational Amplifier ROHSMicrochip TechnologyOperational AmplifierLD1117S33TR(MS)
SOT-223-20℃~+125℃@(Ta) 1 1.4V@(1A) 12V 1A 2mA 3.3V Fixed Over Temperature Protection Positive SOT-223 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSMSKSEMIVoltage Regulators - Linear, Low Drop Out (LDO) Regulators
README
README.mdMMDVM_RPT_Hat
MMDVM_RPT_Hat for the Raspberry Pi
This project provides a Raspberry Pi Hat for the MMDVM.

Revisions
Revision 0.1
First PCB built for testing purposes.
Revision 0.2
A second MOSFET transitor has been added to allow for channel switching by the MMDVM.
Revision 0.3
Another LED was added for the latest implementation of FM mode.
BOM
- The BOM for the rev0.1 board is available as Mouser cart.
- Mouser cart for rev0.2 board.
- Here is the Mouser cart for the revision 0.3.
License
This project is released under the Creative Commons Attribution-NonCommercial-ShareAlike 3.0 (CC-BY-NC-SA 3.0, https://creativecommons.org/licenses/by-nc-sa/3.0/) license. You may edit and share it as you like, as long as credit is given and the license is not changed. You can build as many boards for you and your friends as you like and you can even sell it to them to cover your costs, however it is strictly forbidden to turn this into a commercial product! You are not allowed to build and sell these boards for profit!
Parts
119| Qty | Value | Footprint | References |
|---|---|---|---|
| 12 | 100n | Capacitors_SMD:C_0603 | C2, C3, C4, C10, C12, C13, C16, C21, C22, C24, C37, C38 |
| 11 | 1k5 | Resistors_SMD:R_0603 | R1, R2, R4, R5, R6, R7, R8, R9, R11, R33, R36 |
| 5 | 47u | Capacitors_Tantalum_SMD:CP_Tantalum_Case-C_EIA-6032-28_Reflow | C26, C27, C31, C34, C36 |
| 5 | 4k7 | Resistors_SMD:R_0603 | R17, R27, R28, R31, R32 |
| 5 | 4u7 | Capacitors_SMD:C_0603 | C11, C19, C20, C23, C25 |
| 5 | TEST | Measurement_Points:Measurement_Point_Round-SMD-Pad_Small | TP1, TP2, TP3, TP4, TP5 |
| 4 | RPi_Hat:RPi_Hat_Mounting_Hole | , , , | |
| 4 | 47k | Resistors_SMD:R_0603 | R12, R16, R18, R34 |
| 3 | 10k | Resistors_SMD:R_0603 | R3, R10, R20 |
| 3 | 22k | Resistors_SMD:R_0603 | R23, R24, R25 |
| 3 | 330 | Resistors_SMD:R_0603 | R13, R14, R35 |
| 3 | 470p | Capacitors_SMD:C_0603 | C6, C14, C15 |
| 2 | 10n | Capacitors_SMD:C_0603 | C28, C32 |
| 2 | 10u | Capacitors_Tantalum_SMD:CP_Tantalum_Case-A_EIA-3216-18_Reflow | C1, C5 |
| 2 | 1M | Resistors_SMD:R_0603 | R15, R19 |
| 2 | 1n | Capacitors_SMD:C_0603 | C30, C35 |
| 2 | 20p | Capacitors_SMD:C_0603 | C17, C18 |
| 2 | 39n | Capacitors_SMD:C_0603 | C29, C33 |
| 2 | 5k1 | Resistors_SMD:R_0603 | R26, R30 |
| 2 | IRLML2060 | TO_SOT_Packages_SMD:SOT-23 | Q1, Q3 |
| 2 | MCP6002 | Housings_SOIC:SOIC-8_3.9x4.9mm_Pitch1.27mm | U3, U4 |
| 1 | 100k | Potentiometer_SMD:Potentiometer_Bourns_3214W_Vertical | RV3 |
| 1 | 10k | Potentiometer_SMD:Potentiometer_Bourns_3314G_Vertical | RV2 |
| 1 | 10u | Inductors_SMD:L_0603 | L1 |
| 1 | 10u | Capacitors_SMD:C_0603 | C7 |
| 1 | 1k | Resistors_SMD:R_0603 | R21 |
| 1 | 200k | Potentiometer_SMD:Potentiometer_Bourns_3214W_Vertical | RV4 |
| 1 | 20k | Resistors_SMD:R_0603 | R22 |
| 1 | 2N7002 | TO_SOT_Packages_SMD:SOT-23 | Q2 |
| 1 | 30k | Resistors_SMD:R_0603 | R29 |
| 1 | 600R, 500mA | Inductors_SMD:L_0603 | L2 |
| 1 | 8 MHz | Crystals:Crystal_SMD_Abracon_ABM3-2pin_5.0x3.2mm | Y1 |
| 1 | COS | LEDs:LED_0603 | D3 |
| 1 | DMR | LEDs:LED_0603 | D8 |
| 1 | DSTAR | LEDs:LED_0603 | D9 |
| 1 | FM | LEDs:LED_0603 | D11 |
| 1 | GS2 | jumper:SolderJumper-2_P1.3mm_Open_TrianglePad1.0x1.5mm | J7 |
| 1 | GS3 | jumper:SolderJumper-3_P2.0mm_Open_TrianglePad1.0x1.5mm | J8 |
| 1 | LD1117S33TR | TO_SOT_Packages_SMD:SOT-223-3_TabPin2 | U1 |
| 1 | LOGO | MMDVM_logo:MMDVM_logo | G*** |
| 1 | LOGO | w_logo:Logo_silk_CC-BY-NC-SA_10x3.6mm | G*** |
| 1 | NXDN | LEDs:LED_0603 | D5 |
| 1 | P25 | LEDs:LED_0603 | D6 |
| 1 | POCSAG | LEDs:LED_0603 | D10 |
| 1 | POT | Potentiometers:Potentiometer_Trimmer_Bourns_3296Y | RV1 |
| 1 | PTT | LEDs:LED_0603 | D4 |
| 1 | PWR | LEDs:LED_0603 | D1 |
| 1 | Panel LEDs | Connector_PinHeader_2.00mm:PinHeader_2x11_P2.00mm_Vertical | J4 |
| 1 | Radio | Pin_Headers:Pin_Header_Straight_1x08_Pitch2.54mm | J5 |
| 1 | Radio | Connectors_DSub:DSUB-9_Male_Horizontal_Pitch2.77x2.84mm_EdgePinOffset4.94mm_Housed_MountingHolesOffset7.48mm | J1 |
| 1 | Raspberry_Pi_2_3 | Pin_Headers:Pin_Header_Straight_2x20_Pitch2.54mm | J2 |
| 1 | STLink | Pin_Headers:Pin_Header_Straight_1x04_Pitch2.54mm | J6 |
| 1 | STM32F722RETx | Housings_QFP:LQFP-64_10x10mm_Pitch0.5mm | U2 |
| 1 | SVC | LEDs:LED_0603 | D2 |
| 1 | Serial Display | Pin_Headers:Pin_Header_Straight_1x04_Pitch2.54mm | J3 |
| 1 | TCXO | lib:FOX-924B | X1 |
| 1 | YSF | LEDs:LED_0603 | D7 |
The 117 most common of 119 parts.
Similar boards
- 2 layers124 × 112 mm

- 2 layers144 × 80 mm

DVDLaserScanner
GaudiLabs/OpenLaserScanningMicroscope
Open Source Laser Scanning Microscope
83 parts345GPL-3.0 - 2 layers50.8 × 107.9 mm

- 4 layers60 × 95 mm

STM32H7 GuitarPedal
GuitarML/GuitarPedalSTM32
Guitar pedal using a stm32h7 microcontroller programmed with CubeIDE (PCB and Firmware)
101 parts100MIT - 2 layers72.4 × 91.4 mm

Pedal pi Robin
thawney/PedalPiV2
Pedal Pi V2 by Thawney is an all new and regularly maintained Pedal-Pi by electrosmash; a lo-fi programmable guitar pedal that works with the Raspberry Pi ZERO Board.
54 parts45GPL-3.0 - 2 layers97 × 77.5 mm

ESPlant
CCHS-Melbourne/ESPlant
Environmental Sensor Plant - solar WiFi gardening/meteorological sensor using ESP8266
77 parts37 - 2 layers48 × 110 mm

- 2 layers86.4 × 96.5 mm

MicroDroplet
CGrassin/microdroplet_electrowetting
µDroplet is a platform to experiment with electrowetting with an 8×8 array of electrodes.
104 parts24MIT
Questions
How big is the MMDVM RPT Hat PCB?
It measures 65 × 56 mm and has 2 copper layers, 1.6 mm thick.
What parts does the MMDVM RPT Hat use?
119 parts, built around the MCP6002-I/P and LD1117S33TR(MS). The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the MMDVM RPT Hat KiCad files?
From the mathisschmieder/MMDVM_RPT_Hat repository on GitHub, at the commit this page was made from: the board is MMDVM_RPT_Hat.kicad_pcb and its schematic Filter.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the MMDVM RPT Hat design in my own project?
Its repository states no licence, so its author keeps all rights: ask mathisschmieder before reusing the design.